Skip to content
Please enter a keyword to search
  • Preview

    AS/NZS 1866:1997

    Current The latest, up-to-date edition.

    Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020)

    Available format(s):  Hardcopy, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  05-09-1997

    Publisher:  Standards Australia

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 - AS/NZS 1866:1997 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD, BAR, SOLID AND HOLLOW SHAPES
    4 - PREFACE
    5 - CONTENTS
    7 - SECTION 1 SCOPE AND GENERAL
    7 - 1.1 SCOPE
    7 - 1.2 REFERENCED DOCUMENTS
    7 - 1.3 DEFINITIONS
    7 - 1.3.1 Bar
    8 - 1.3.2 Batch
    8 - 1.3.3 Circumscribing circle diameter (or circle size)
    8 - 1.3.4 Die line
    8 - 1.3.5 Finish
    8 - 1.3.6 Machining stock
    8 - 1.3.7 Rod
    8 - 1.3.8 Semi-hollow section
    8 - 1.4 DESIGNATION
    8 - 1.4.1 General
    8 - 1.4.2 Alloy designation
    8 - 1.4.3 Temper designation
    8 - 1.5 CLASSIFICATION OF HOLLOW EXTRUDED SHAPES
    9 - 1.6 ROUNDING OF TEST RESULTS VALUES
    9 - 1.6.1 General
    9 - 1.6.2 Measured dimensions
    9 - 1.6.3 Tensile test results
    10 - 1.7 MARKING
    10 - 1.8 TRACEABILITY
    11 - SECTION 2 MANUFACTURING REQUIREMENTS
    11 - 2.1 SCOPE
    11 - 2.2 CHEMICAL COMPOSITION
    11 - 2.2.1 General
    11 - 2.2.2 Chemical analysis
    11 - 2.3 SURFACE FINISH
    11 - 2.4 FREEDOM FROM DEFECTS
    11 - 2.5 MECHANICAL PROPERTIES
    11 - 2.6 MANUFACTURING TOLERANCES
    17 - SECTION 3 MECHANICAL TESTING REQUIREMENTS
    17 - 3.1 SCOPE
    17 - 3.2 SAMPLING FOR MECHANICAL TESTING
    17 - 3.3 LOCATION AND PREPARATION OF TENSILE TEST PIECES
    17 - 3.3.1 General
    17 - 3.3.2 Rod and bar
    17 - 3.3.3 Shapes
    18 - 3.3.4 Tubular products
    18 - 3.4 TENSILE TEST
    18 - 3.5 RETESTING
    19 - SECTION 4 MANUFACTURING TOLERANCES
    19 - 4.1 SCOPE
    19 - 4.2 DIAMETER TOLERANCES FOR EXTRUDED MACHINING ROD (ALLOYS 2011 AND 6262 ONLY)
    19 - 4.3 DISTANCE-ACROSS-FLATS TOLERANCES FOR EXTRUDED MACHINING HEXAGONAL BAR (ALLOYS 2011 AND 6262 ONLY)
    20 - 4.4 DIAMETER, WIDTH AND DEPTH TOLERANCES FOR CLASS A HOLLOW SHAPES
    21 - 4.5 WALL THICKNESS TOLERANCES FOR CLASS A HOLLOW SHAPES
    21 - 4.6 CROSS-SECTIONAL TOLERANCES FOR ROD, BAR, SOLID SHAPES AND CLASS B, C AND D HOLLOW SHAPES
    21 - 4.6.1 General
    25 - 4.6.2 Examples illustrating the use of Table 4.6
    27 - 4.7 LENGTH TOLERANCES
    27 - 4.8 TWIST TOLERANCES
    27 - 4.8.1 General
    28 - 4.8.2 Conversion of twist tolerance to a linear value
    29 - 4.9 STRAIGHTNESS TOLERANCES
    30 - 4.10 FLATNESS (FLAT SURFACE) TOLERANCES
    31 - 4.11 TOTAL TRANSVERSE FLATNESS TOLERANCES
    31 - 4.12 ANGULARITY TOLERANCES
    32 - 4.13 CONTOUR TOLERANCES
    32 - 4.14 CORNER AND FILLET RADII TOLERANCES
    33 - 4.15 SQUARENESS-OF-CUT-ENDS TOLERANCE
    34 - SECTION 5 YACHT MASTS
    34 - 5.1 SCOPE
    34 - 5.2 CROSS-SECTIONAL DIMENSION TOLERANCES
    36 - 5.3 TWIST TOLERANCES
    37 - APPENDIX A - PURCHASING GUIDELINES
    37 - A1 GENERAL
    37 - A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
    37 - A3 TEST REQUIREMENTS
    37 - A3.1 Tensile test
    37 - A3.2 Independent tests
    38 - A4 SURFACE FINISH
    39 - APPENDIX B - TYPICAL FABRICATION CHARACTERISTICS AND APPLICATION DATA

    Abstract - (Show below) - (Hide below)

    Specifies requirements for aluminium and aluminium alloy extruded rod, bar, solid and hollow shape products for general engineering purposes. Chemical composition and mechanical properties are specified, and allowable tolerances on dimensions are included for rod, bar, solid shapes, and Class A, Class B, Class C and Class D hollow shapes. Examples illustrating the use of tolerance are included.

    Scope - (Show below) - (Hide below)

    This Standard specifies requirements for aluminium and aluminium alloy extruded rod, bar, solid and hollow products for general engineering purposes.NOTES:Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.Typical fabrication characteristics and application data for wrought aluminium and aluminium alloys are given in Appendix B.

    General Product Information - (Show below) - (Hide below)

    Committee MT-003
    Document Type Standard
    Product Note Reconfirmed 21/08/2020.
    This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 21/08/2020
    Publisher Standards Australia
    Status Current
    Supersedes
    Under Revision

    History - (Show below) - (Hide below)

    First published in Australia as part of AS H46-1948.
    AS H50 first published 1950.
    Second edition 1962.
    Third edition 1971.
    AS H50-1971 and AS H46-1948 revised, amalgamated and redesignated AS 1866-1976.
    Second edition 1986.
    Jointly revised and designated AS/NZS 1866:1997.
    Reconfirmed 2020. Originated in Australia as AS H50-1971. Previous edition AS 1866-1986. Jointly revised and designated AS/NZS 1866:1997.

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
    AS 2338-1980 Preferred dimensions of wrought metal products
    AS 1817-1991 Metallic materials - Vickers hardness test
    AS 2338-2004 Preferred dimensions of wrought metal products
    AS 1816-1990 Metallic materials - Brinell hardness test
    AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
    AS 2504-1981 Rigid aluminium busbars
    AS 2612-1997 Aluminium and aluminium alloys - Sampling for chemical and spectrochemical analysis
    AS 2848.1-1998 Aluminium and aluminium alloys - Compositions and designations Wrought products (Reconfirmed 2018)
    AS 1391-1991 Methods for tensile testing of metals
    AS 2025-1991 Metallic materials - Rockwell superficial hardness test - N and T scales
    AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
    AS 1815-1991 Metallic materials - Rockwell hardness test

    Standards Referencing This Book - (Show below) - (Hide below)

    AS 2427-2004 Smoke/heat release vents
    AS/NZS 1576.1:2010 Scaffolding General requirements
    AS 4085-1992 Automatic sliding door assemblies
    AS/NZS 1576.2:2016 Scaffolding Couplers and accessories
    AS/NZS 1577:2013 Scaffold decking components
    AS 4132.2-1993 Boat and ship design and construction - Aluminium construction
    AS 4647-2005 Domestic diaphragm gas meters
    AS/NZS 1768:2007 Lightning protection
    AS 3868-1991 Earth-moving machinery - Design guide for access systems
    AS 2047-1999 Windows in buildings - Selection and installation
    AS 4312-2008 Atmospheric corrosivity zones in Australia
    AS/NZS 4994.1(INT):2004 Temporary roof edge protection for housing and residential buildings General requirements
    AS 4312:2019 Atmospheric corrosivity zones in Australia
    AS 1799.5-1990 Small pleasure boats code - Aluminium construction
    AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
    AS 5007-2007 Powered doors for pedestrian access and egress (Reconfirmed 2018)
    AS 2047-2014 Windows and external glazed doors in buildings
    AS/NZS 1576.2:2009 Scaffolding Couplers and accessories
    AS 1154.1-2009 Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019)
    AS 2809.2:2020 Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
    AS 2809.2-1999 Road tank vehicles for dangerous goods - Tankers for flammable liquids
    AS/NZS 4576:1995 Guidelines for scaffolding
    AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
    AS/NZS 1892.1:1996 Portable ladders Metal
    AS 4041-2006 Pressure piping (Reconfirmed 2016)
    AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
    AS 2809.4-2001 Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes
    AS 1577-1993 Scaffold planks
    AS 2809.2-2008 Road tank vehicles for dangerous goods - Road tank vehicles for flammable liquids
    AS 4285:2019 Rooflights
    AS 4290-2000 Design and installation of Revolving doors
    AS/NZS 1576.3:1995 Scaffolding Prefabricated and tube-and-coupler scaffolding
    AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
    AS 4254.2-2012 Ductwork for air-handling systems in buildings Rigid duct
    AS 4254-2002 Ductwork for air-handling systems in buildings
    AS 1154.1-2004 Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions
    AS 1576.4-1991 Scaffolding - Suspended scaffolding
    AS/NZS 3500.5:2000 National Plumbing and Drainage - Domestic installations
    AS 1231-2000 Aluminium and aluminium alloys - Anodic oxidation coatings
    AS/NZS 1577:2018 Scaffold decking components
    AS/NZS 1576.5:1995 Scaffolding Prefabricated splitheads and trestles
    AS/NZS 1576.4:2013 Scaffolding Suspended scaffolding
    AS/NZS 2179.1:1994 Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners
    AS/NZS 2785:2000 Suspended ceilings - Design and installation
    AS 2809.4:2017 Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
    AS 4285-2007 Skylights
    AS 1576.2-1991 Scaffolding Couplers and accessories
    AS/NZS 1768(INT):2003 Lightning protection
    AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
    AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)
    AS/NZS 4994.1:2009 Temporary edge protection General requirements
    AS 6001-1999 Working platforms for housing construction
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective