AS/NZS 2642.2:2008
|
Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022) |
AS 1741-1991
|
Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018) |
AS/NZS 2179.2(INT):1998
|
Specifications for rainwater goods, accessories and fasteners - PVC rainwater goods and accessories |
AS 4032.2-2005
|
Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015) |
AS/NZS 3879:2011
|
Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
AS 2845.2-2010
|
Water supply - Backflow preventions devices Registered air gaps and registered break tanks |
AS 1289.5.3.1-2004
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus (Reconfirmed 2016) |
AS 2700 Set-2011
|
Colour Standards for general purposes Set |
AS 1319-1994
|
Safety signs for the occupational environment (Reconfirmed 2018) |
AS/NZS 2032:2006
|
Installation of PVC pipe systems |
AS/NZS 4234:2008
|
Heated water systems - Calculation of energy consumption |
AS 1646-2007
|
Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
AS/NZS 4999:2006
|
PVC-U maintenance shafts |
AS 1289.5.8.8-1998
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water (Reconfirmed 2013) |
AS 1289.5.4.2-2007
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values |
AS 3673-1989
|
Malleable cast iron threaded pipe fittings |
AS/NZS 2712:2007
|
Solar and heat pump water heaters - Design and construction (Reconfirmed 2020) |
AS/NZS 3500.0:2003
|
Plumbing and drainage Glossary of terms |
AS/NZS 3500.1:2003
|
Plumbing and drainage Water services |
AS/NZS 2492:2007
|
Cross-linked polyethylene (PE-X) pipes for pressure applications |
AS 1834.2-1986
|
Material for soldering Flux-cored solders (Reconfirmed 2018) |
AS/NZS 2648.1:1995
|
Underground marking tape Non-detectable tape (Reconfirmed 2020) |
AS 1631-1994
|
Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
AS 4176.3-2010
|
Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD) |
AS/NZS 1546.3:2008
|
On-site domestic wastewater treatment units Aerated wastewater treatment systems |
AS/NZS 2179.1:1994
|
Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners |
AS 1345-1995
|
Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
AS 1478.1-2000
|
Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
AS/NZS 2845.1:2010
|
Water supply - Backflow prevention devices Materials, design and performance requirements |
AS 5082.2-2007
|
Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017) |
AS/NZS 3500.4:2003
|
Plumbing and drainage Heated water services |
AS 1289.5.2.1-2003
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density or moisture content relation of a soil using modified compactive effort |
AS/NZS 2878:2000
|
Timber - Classification into strength groups |
AS 1289.5.8.9-1998
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks (Reconfirmed 2013) (Reconfirmed 2014) |
AS/NZS 4692.1:2005
|
Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016) |
AS 2700-2011
|
Colour standards for general purposes (Reconfirmed 2022) |
AS 1289.5.4.1-2007
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio (Reconfirmed 2016) |
AS 2813-1985
|
Solar water heaters - Method of test for thermal performance - Simulator method |
AS/NZS 1546.2:2008
|
On-site domestic wastewater treatment units Waterless composting toilets |
AS/NZS 1477:2006
|
PVC pipes and fittings for pressure applications |
AS 5082.1-2007
|
Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications |
AS/NZS 2033:2008
|
Installation of polyethylene pipe systems |
AS 1289.5.1.1-2003
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort |
AS/NZS 2537.2:2011
|
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings (ISO 15875-3:2003, MOD) (Reconfirmed 2022) |
AS 1273-1991
|
Unplasticized PVC (UPVC) downpipe and fittings for rainwater (Reconfirmed 2018) |
AS/NZS 3500.2:2003
|
Plumbing and drainage Sanitary plumbing and drainage |
AS/NZS 1866:1997
|
Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020) |
AS/NZS 1260:2009
|
PVC-U pipes and fittings for drain, waste and vent application |
AS 1289.5.8.5-1998
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block (Reconfirmed 2013) |
AS/NZS 4401:2006
|
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE) (Reconfirmed 2017) |
AS 3795-1996
|
Copper alloy tubes for plumbing and drainage applications |
AS 1289.5.7.1-2006
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method) |
AS 1379-2007
|
Specification and supply of concrete (Reconfirmed 2017) |
AS 1074-1989
|
Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
AS/NZS 2280:2012
|
Ductile iron pipes and fittings |
AS/NZS 4129:2008
|
Fittings for polyethylene (PE) pipes for pressure applications |
AS/NZS 4020:2005
|
Testing of products for use in contact with drinking water |
AS 10745-1998
|
Information technology - Open Systems Interconnection - Upper layers security model |
AS/NZS 7671:2010
|
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) (ISO 7671:2003, MOD) (Reconfirmed 2022) |
AS 3648-1993
|
Specification and methods of test for packaged concrete mixes |
AS 3517-2007
|
Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
AS 2984-1987
|
Solar water heaters - Test for thermal performance - Outdoor test |
AS/NZS 2537.1:2011
|
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General (ISO 15875-1:2003, MOD) (Reconfirmed 2022) |
AS 3571.1-2009
|
Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD) |
AS 1289.5.8.4-2009
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks |
AS/NZS 4058:2007
|
Precast concrete pipes (pressure and non-pressure) |
AS/NZS 1546.1:2008
|
On-site domestic wastewater treatment units Septic tanks |
AS 2439.1-2007
|
Perforated plastics drainage and effluent pipe and fittings Perforated drainage pipe and associated fittings |
AS 1604.1-2012
|
Specification for preservative treatment Sawn and round timber |
AS 3498-2009
|
Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
AS 4139-2003
|
Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
AS 1289.5.5.1-1998
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016) |
AS 1289.5.8.6-1998
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block |
AS 4809-2003
|
Copper pipe and fittings - Installation and commissioning |
AS 4552-2005
|
Gas fired water heaters for hot water supply and/or central heating |
AS/NZS 1254:2010
|
PVC-U pipes and fittings for stormwater and surface water applications |
AS 1432-2004
|
Copper tubes for plumbing, gasfitting and drainage applications |
AS 1289.5.3.5-1997
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013) |
AS 4032.1-2005
|
Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
AS 1397-2011
|
Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
AS 3688-2005
|
Water supply - Metallic fittings and end connectors |
AS/NZS 3500.3:2003
|
Plumbing and drainage Stormwater drainage |
AS/NZS 3000:2007
|
Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 1397-2001
|
Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS 1289.5.4.3-2006
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values |
AS 1289.5.6.1-1998
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016) |
AS 1289.5.3.2-2004
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer (Reconfirmed 2016) |
AS 4176.2-2010
|
Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022) |
AS 1289.5.8.1-2007
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-Density gauge - Direct transmission mode |
AS 3996-2006
|
Access covers and grates |
AS 1289.5.8.7-1998
|
Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components |
AS/NZS 4936:2002
|
Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems (Reconfirmed 2020) |