AS/NZS 2280:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Ductile iron pipes and fittings
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
14-06-2024
16-09-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies requirements for ductile iron pressure pipes centrifugally cast in moulds, and ductile iron fittings of nominal sizes up to and including DN 750.
| Committee |
WS-016
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 832 0
|
| Pages |
65
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for ductile iron pressure pipes centrifugally cast in moulds, and ductile iron fittings of nominal sizes up to and including DN 750.NOTE: Ductile iron is also known as spheroidal graphite iron, SG iron or nodular graphite iron.The specified pipes and fittings are intended primarily for conveying water under pressure, but may be used for conveying sewage or other liquids. Fittings covered by this Standard are intended primarily for use with water supply pressure pipes.NOTES: 1 Fittings are also used in non-metallic pipeline systems.2 Fittings may also be used with pressure pipes of alternative outside diameters by the adoption of compatible sockets or utilization of compensating elastomeric seals, provided the joint meets the performance requirements of this Standard. Ductile iron spigots should not be inserted into plastic pipe sockets.This Standard specifies pressure classifications of pipe on the basis of the allowable operating pressure (AOP); however, Flange Class (FLCL) pipe has been specified for manufacture of flanged pipe with screw-on flanges.
Originated in Australia as AS 2280-1979.
Previous edition AS/NZS 2280:2012.
Eighth edition 2014.
Reissued incorporating Amendment No. 1 (November 2015).
Reissued incorporating Amendment No. 2 (June 2017).
| AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
| AS 1984-1977 | Vernier callipers (metric series) |
| AS 3680-2008 | Polyethylene sleeving for ductile iron piping (Reconfirmed 2021) |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 2758.1-1998 | Aggregates and rock for engineering purposes - Concrete aggregates |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
| AS 1580.408.4-2004 | Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019) |
| AS 2102-1989 | Micrometer callipers for external measurement |
| AS 1816.1-2007 | Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017) |
| AS/NZS 2032:2006 | Installation of PVC pipe systems (Reconfirmed 2024) |
| AS 1111.1-2000 | ISO metric hexagon bolts and screws - Product grade C - Bolts |
| AS 1290.4-1995 | Linear measuring instruments used in construction - Retractable steel pocket rules |
| AS/NZS 3690:2009 | Installation of ABS pipe systems (Reconfirmed 2024) |
| AS/NZS 2566.1:1998 | Buried flexible pipelines Structural design |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS 4087:2011 | Metallic flanges for waterworks purposes |
| AS 1290.5-1999 | Linear measuring instruments used in construction - Coated and etched steel measuring tapes |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS 3972-2010 | General purpose and blended cements |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 3681-2008 | Application of polyethylene sleeving for ductile iron piping (Reconfirmed 2019) |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS 2101-1978 | Internal micrometers (including stick micrometers) (metric series) |
| AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
| AS 2118.1:2017 | Automatic fire sprinkler systems General systems |
| AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.