AS/NZS 2280:2020
Current
The latest, up-to-date edition.
Ductile iron pipes and fittings
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
27-03-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.The objective of this Standard is to provide a standard manufacturing specification to be used by manufacturers and purchasers of ductile iron pressure pipes and fittings.
| Committee |
WS-016
|
| DevelopmentNote |
Under Revision by DR AS/NZS 2280:2020 Amd 1:2020. New PDF incorporating Amendment 1.
|
| DocumentType |
Standard
|
| ISBN |
978 1 76072 783 3
|
| Pages |
72
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes | |
| UnderRevision |
ductile iron fittings of nominal sizes up to and including DN 750.
NOTE 1 Ductile iron is also known as spheroidal graphite iron, SG iron or nodular graphite iron.
The specified pipes and fittings are intended primarily for conveying water under pressure, but may be used for conveying sewage or other liquids.
Fittings covered by this Standard are intended primarily for use with water supply pressure pipes.
NOTE 2 Fittings are also used in non-metallic pipeline systems.
NOTE 3 Fittings may also be used with pressure pipes of alternative outside diameters by the adoption of compatible sockets or utilization of compensating elastomeric seals, provided the joint meets the performance requirements of this Standard. Ductile iron spigots should not be inserted into plastic pipe sockets.
This Standard specifies pressure classifications of pipe on the basis of the allowable operating pressure (AOP); however, Flange Class (FLCL) pipe has been specified for manufacture of flanged pipe with screw-on flanges.
Originated as AS 2280-1979.
Previous edition AS/NZS 2280:2014.
Ninth edition AS/NZS 2280:2020.
| ISO 16132:2016 | Ductile iron pipes and fittings — Seal coats for cement mortar linings |
| ISO 8179-1:2017 | Ductile iron pipes, fittings, accessories and their joints — External zinc-based coating — Part 1: Metallic zinc with finishing layer |
| AS/NZS 4020:2018 | Testing of products for use in contact with drinking water |
| AS ISO/IEC 17025:2018 | General requirements for the competence of testing and calibration laboratories |
| AS 1111.1:2015 | ISO metric hexagon bolts and screws - Product grade C Bolts |
| AS 2758.1:2014 | Aggregates and rock for engineering purposes Concrete aggregates |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
| AS/NZS 2566.1:1998 | Buried flexible pipelines Structural design |
| AS/NZS 2032:2006 | Installation of PVC pipe systems (Reconfirmed 2024) |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
| AS 1816.1-2007 | Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017) |
| AS 4087:2011 | Metallic flanges for waterworks purposes |
| AS 2317.1:2018 | Lifting points Collared eyebolts and collared eyenuts - Grade 4 |
| AS 3972-2010 | General purpose and blended cements |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS 1580.408.4-2004 | Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019) |
| EN 15655-1:2018 | Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings |
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS 1353.2-1997 | Flat synthetic-webbing slings Care and use |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS/NZS 3690:2009 | Installation of ABS pipe systems (Reconfirmed 2024) |
| EN 15189:2006 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.