AS/NZS 2699.3:2002

1 - AS/NZS 2699.3:2002 BUILT-IN COMPONENTS FOR MASONRY CONSTRUCTION - LINTELS AND SHELF ANGLES (DURABILITY REQUIREMENTS)
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE AND APPLICATION
6 - 1.1.1 Scope
6 - 1.1.2 Application
6 - 1.2 REFERENCED DOCUMENTS
7 - 1.3 NEW TECHNOLOGIES
8 - 1.4 DEFINITIONS
8 - 1.4.1 Duplex coating
8 - 1.4.2 Durability classification (R)
8 - 1.4.3 Galvanized coating
8 - 1.4.4 Inorganic zinc silicate
8 - 1.4.5 Lintel
8 - 1.4.6 Lot
8 - 1.4.7 Masonry couplet
8 - 1.4.8 Organic coating
8 - 1.4.9 Shelf angle
8 - 1.4.10 Specimen
9 - SECTION 2 PERFORMANCE CRITERIA
9 - 2.1 SCOPE OF SECTION
9 - 2.2 AIM
9 - 2.3 SAFETY
9 - 2.4 DURABILITY
9 - 2.4.1 General
9 - 2.4.2 Damage
9 - 2.4.3 Classification of materials
10 - 2.4.4 Durability criteria for lintels
10 - 2.4.5 Test methods
10 - 2.5 IMPACT RESISTANCE
11 - SECTION 3 DEEMED-TO-COMPLY PROVISIONS
11 - 3.1 DURABILITY
11 - 3.2 IMPACT RESISTANCE OF COATINGS ON LINTELS
13 - SECTION 4 IDENTIFICATION MARKS
13 - 4.1 LINTEL MARKING
13 - 4.2 DURABILITY COLOUR CODING
13 - 4.3 PACKAGE MARKING
14 - SECTION 5 ASSESSMENT FOR COMPLIANCE WITH THIS STANDARD
14 - 5.1 GENERAL
14 - 5.2 SAMPLING
14 - 5.3 MANUFACTURERS CERTIFICATE
15 - APPENDIX A - METHOD FOR DETERMINING THE DURABILITY CLASSIFICATION OFBARE LINTELS OR LINTELS WITH A METALLIC COATING
15 - A1 SCOPE
15 - A2 PRINCIPLE
15 - A3 APPARATUS
15 - A4 SAMPLE
15 - A5 PREPARATION OF SPECIMENS
16 - A6 PROCEDURE FOR CORROSION TESTING
16 - A6.2 Test procedure
17 - A6.3 Examination
17 - A6.4 Total coating mass determination
17 - A7 INTERPRETATION OF RESULTS
17 - A7.1 General
18 - A7.2 Interpretation of results for metallic coating
18 - A7.3 Interpretation of results for bare (uncoated) lintels
18 - A8 RECORDS
19 - A9 REPORT
20 - APPENDIX B - METHOD FOR DETERMINING THE DURABILITY CLASSIFICATION OF STEEL LINTELS WITH AN ORGANIC, INORGANIC ZINC...
20 - B1 SCOPE
20 - B2 PRINCIPLE
20 - B3 APPARATUS
20 - B4 SAMPLE
21 - B5 ALKALI SENSITIVITY TEST
21 - B6 CORROSION RESISTANCE TEST
21 - B6.1 Preparation of lintels
21 - B6.2 Preparation of specimens
22 - B6.3 Test procedure
22 - B6.4 Examination of lintels
22 - B6.5 Determination of coating mass of thickness
22 - B6.6 Interpretation of the results
23 - B7 RECORDS
23 - B8 REPORT
24 - APPENDIX C - TEST TO IDENTIFY STAINLESS STEEL GRADE 316 OR 316L
24 - C1 GENERAL
24 - C2 TEST CHEMICALS
24 - C2.1 Solution A
24 - C2.2 Solution B
24 - C3 TEST REQUIREMENTS
24 - C4 TEST METHOD
26 - APPENDIX D - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
26 - D1 SCOPE
26 - D2 STATISTICAL SAMPLING
26 - D3 PRODUCT CERTIFICATION
27 - D4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
27 - D5 OTHER MEANS OF ASSESSMENT
28 - APPENDIX E - METHODS OF TEST FOR IMPACT RESISTANCE OF PAINTED LINTELS
28 - E1 SCOPE
28 - E2 PRINCIPLE
28 - E3 APPARATUS
28 - E3.1 Impact tester
28 - E3.2 Test panels
29 - E3.3 Magnifier
29 - E3.4 Steel tape
29 - E4 TEST CONDITIONS
29 - E5 PREPARATION OF TEST PANELS
29 - E6 TEST PROCEDURE
30 - E7 EXPRESSION OF RESULT

Sets out the requirements for methods of testing the durability performance of steel lintel and shelf angles that are built into masonry.

This Standard specifies requirements and methods of test for durability performance of steel lintels and shelf angles to be built into masonry. NOTES: 1 This Standard does not cover requirements for structural design or the method of its determination. Details for these are given by NZS 3404, AS 3700, AS 4100, NZS 4210 or AS/NZS 4600. 2 The design and installation requirements for lintels and shelf angles are specified in AS 3700 and NZS 4203. 3 Throughout this Standard, lintel signifies lintel or shelf angle, unless stated otherwise. 4 Lintels with a high durability classification may be used for less severe corrosion conditions. 5 The durability performance categories employed in this Standard are compatible with the environments specified in AS 3700, NZS 3604 and AS/NZS 2312.

Originated as AS/NZS2699.3:2000.
Second edition 2002.