AS/NZS 3018:2001
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Electrical installations - Domestic installations
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
18-05-2018
25-09-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements and suitable methods for installing electrical installations in domestic premises including alterations, additions and repairs. Sufficient information has been included to allow the completion of an electrical installation without reference to AS/NZS 3000.
| Committee |
EL-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 4086 3
|
| Pages |
126
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes | |
| UnderRevision |
This Standard sets out acceptable methods for electrical installations in single domestic premises, based on the requirements of AS/NZS 3000. The requirements of AS/NZS 3000 are intended to protect persons, livestock and property from electric shock, fire and physical injury hazards that may arise from a domestic electrical installation that is used with reasonable care and with due regard to the intended purpose of the electrical installation.
First published as AS/NZS 3018:1997.
Second edition 2001.
| AS/NZS 3017:1996 | Electrical installations - Testing guidelines |
| AS/NZS 3008.1.1:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS 60038-2000 | Standard voltages |
| AS/NZS 3191:1996 | Approval and test specification - Electric flexible cords |
| AS/NZS 3131:1995 | Approval and test specification - Plugs and socket-outlets for use in installation wiring systems |
| AS 3439.2-1994 | Low-voltage switchgear and controlgear assemblies - Particular requirements for busbar trunking systems (busways) |
| AS 3190-1994 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
| AS/NZS 3175.2.2:1994 | Approval and test specification - Residual current-operated circuit breakers without integral overcurrent protection for household and similar uses (RCCB’s) Functionally dependent on line voltage |
| AS/NZS 3108:1994 | Approval and test specification - Particular requirements for isolating transformers and safety isolating transformers |
| AS/NZS 3175.2.1:1994 | Approval and test specification - Residual current-operated circuit breakers without integral overcurrent protection for household and similar uses (RCCB’s) Functionally independent of line voltage |
| AS/NZS 3112:2000 | Approval and test specification - Plugs and socket-outlets |
| AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 2053.1:2001 | Conduits and fittings for electrical installations General requirements (Reconfirmed 2016) |
| AS/NZS 3194:1993 | Approval and test specification - Electric shaver supply units |
| AS/NZS 3100:1997 | Approval and test specification - General requirements for electrical equipment |
| AS/NZS 3175.1:1994 | Approval and test specification - Residual current-operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s) General rules |
| AS/NZS 3560.1:2000 | Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV Aluminium conductors (Reconfirmed 2021) |
| AS 1939-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) |
| AS/NZS 5000.1:1999 | Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 kV |
| AS/NZS 61009.1:1999 | Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules |
| AS/NZS 3155:1995 | Approval and test specification - Electric cables - Neutral screened - For working voltages up to and including 0.6/1 kV |
| AS/NZS 5000.2:1999 | Electric cables - Polymeric insulated For working voltages up to and including 450/750 V |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| HB 301-2001 | Electrical installations - Designing to the Wiring rules |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.