AS/NZS 3161:1995

1 - AS/NZS 3161:1995 APPROVAL AND TEST SPECIFICATION - THERMOSTATS AND ENERGY REGULATORS
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 APPLICATION
6 - 2.1 General requirements of AS 3100
6 - 2.2 Specific requirements of this Standard
6 - 2.3 Requirements of other Standards
6 - 3 REFERENCED DOCUMENTS
7 - 4 DEFINITIONS
7 - 4.1 Energy regulator
7 - 4.2 Incorporated control
7 - 4.3 Independently mounted control
7 - 4.4 Integrated control
7 - 4.5 Rated current
8 - 4.6 Rated voltage
8 - 4.7 Sensing element
8 - 4.8 Switch head
8 - 4.9 Thermostat
8 - 5 FORM AND ACTION OF CONTACTS
8 - 6 ENCLOSURES
8 - 7 INSULATING MATERIALS
8 - 7.1 General
8 - 7.2 Sealing compounds
8 - 8 EARTHING FACILITIES
9 - 9 MARKING
9 - 9.1 General
9 - 9.2 Information required
10 - 9.3 Location
10 - 10 TESTS
10 - 10.1 General
10 - 10.2 Resistance to humidity
11 - 10.3 Insulation resistance
12 - 10.4 High voltage (electric strength)
13 - 10.5 Test on devices with ‘off’ position
13 - 10.6 Temperature rise
14 - 10.7 Endurance
14 - 10.8 Inspection
14 - 10.9 Earthing Facilities
14 - 10.10 Mechanical strength (for independently mounted controls only)
15 - 10.11 Resistance to heat
15 - 10.12 Resistance to abnormal heat, fire and tracking

Specifies essential safety requirements for thermostats and energy regulators for approval and test purposes. It is intended to be read in conjunction with AS 3100.

This Standard applies to thermostats and energy regulators as defined in Clauses 4.1 and 4.2 and to controls incorporating a combination of the features referred to in those definitions. Such controls are associated with appliances, equipment and heating systems for household use, or controls which are specifically referred to in individual Approval and Test Specifications.A control which complies with the appropriate requirements of IEC 730.1 is deemed to comply with this Standard.This Standard does not apply to-(a) excess temperature or over-current protective controls, thermal cut-outs and the like, as commonly used for the protection of electrical apparatus;(b) thermostats and energy regulators which are specifically excluded from compliance with this Standard in another Approval and Test Specification; or(c) controls incorporating electronic components, the failure of which will affect the controls compliance with this Standard.NOTE: A thermostat or an energy regulator, or both, may hereinafter be referred to as 'a control'.Where a control also incorporates a thermal cutout, this Standard applies only to the 'control' component.NOTE: It is expected that individual equipment Standards will specify appropriate requirements for thermal cutouts; for example, see AS 1308.

First published in Australia as AS C161-1960.Second edition 1970.Revised and redesignated AS 3161-1979. First published in New Zealand as NZS/AS 3161:1979. Jointly revised and designated as Joint Standard AS/NZS 3161:1995. First published in Australia as AS C161-1960. Second edition 1970. Revised and redesignated AS 3161-1979. First published in New Zealand as NZS/AS 3161:1979. Jointly revised and designated as Joint Standard AS/NZS 3161:1995.