• Shopping Cart
    There are no items in your cart

AS/NZS 3200.2.7:1999

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Medical electrical equipment Particular requirements for safety - High voltage generators of diagnostic X-ray generators

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

27-09-2018

Superseded by

AS 60601.2.54:2018

Language(s)

English

Published date

05-06-1999

€92.72
Excluding VAT

1 - AS/NZS 3200.2.7:1999 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY-HIGH VOLTAGE GENERATORS OF DIAGNOSTIC ...
4 - PREFACE
5 - CONTENTS
7 - SECTION 1: GENERAL
7 - 1 Scope and object
7 - 1.1 Scope
7 - 1.2 Object
8 - 1.3 Particular standards
9 - 1.3.101 Related International Standards
9 - 2 Terminology and definitions
10 - 2.101 Qualifying conditions for defined terms
10 - 2.101.1 Operating conditions for nominal X-RAY TUBE VOLTAGE
10 - 2.101.2 PERCENTAGE RIPPLE in CONSTANT POTENTIAL HIGH-VOLTAGE GENERATORS
10 - 2.101.3 RADIATION QUANTITY for NOMINAL SHORTEST IRRADIATION TIME
10 - 2.101.4 IRRADIATION TIME
11 - 3 General requirements
11 - 5 Classification
11 - 6 Identification, marking and documents
11 - 6.1 Marking on the outside of EQUIPMENT or EQUIPMENT parts
12 - 6.7 Indicator lights and push-buttons
13 - 6.8 ACCOMPANYING DOCUMENTS
13 - 6.8.2 INSTRUCTIONS FOR USE
14 - 6.8.3 Technical description
14 - 6.8.101 Reference to ACCOMPANYING DOCUMENTS
14 - 6.8.102 Statement of compliance
15 - SECTION 2: ENVIRONMENTAL CONDITIONS
15 - 10 Environmental conditions
15 - 10.2.2 Power supply
17 - SECTION 3: PROTECTION AGAINST ELECTRIC SHOCK HAZARDS
17 - 15 Limitation of voltage and/or energy
17 - 16 ENCLOSURES and PROTECTIVE COVERS
17 - 19 Continuous LEAKAGE CURRENTS and PATIENT AUXILIARY CURRENTS
17 - 19.3 Allowable values
18 - 20 Dielectric strength
18 - 20.3 Values of test voltages
19 - 20.4 Tests
20 - SECTION 4: PROTECTION AGAINST MECHANICAL HAZARDS
20 - SECTION 5: PROTECTION AGAINST HAZARDS FROM UNWANTED OR EXCESSIVE RADIATION
20 - 29 X-RADIATION
20 - 29.1 X-RADIATION generated by diagnostic X-RAY GENERATORS containing HIGH-VOLTAGE GENERATORS
20 - 29.1.101 General requirements
20 - 29.1.102 Indication of operational states
21 - 29.1.103 Limitation of RADIATION output
22 - 29.1.104 Safety measures against excessive RADIATION output
23 - 29.1.105 Connection of external INTERLOCKS
23 - 29.1.106 Adequate range of LOADING FACTORS
24 - 36 Electromagnetic compatibility
24 - SECTION 6: PROTECTION AGAINST HAZARDS OF IGNITION OF FLAMMABLE ANAESTHETIC MIXTURES
24 - SECTION 7: PROTECTION AGAINST EXCESSIVE TEMPERATURES AND OTHER SAFETY HAZARDS
24 - 42 Excessive temperatures
25 - SECTION 8: ACCURACY OF OPERATING DATA AND PROTECTION AGAINST HAZARDOUS OUTPUT
25 - 50 Accuracy of operating data
25 - 50.1 General
25 - 50.101 Indication of electric and RADIATION output
25 - 50.101.1 General
26 - 50.101.2 Shortened indication
26 - 50.101.3 Indication of varying LOADING FACTORS
26 - 50.102 Reproducibility, linearity and constancy
27 - 50.102.1 Reproducibility of the RADIATION output in INTERMITTENT MODE without AUTOMATIC EXPOSURE CONTROL activated
27 - 50.102.2 Linearity and constancy in INTERMITTENT MODE
30 - 50.103 Accuracy of LOADING FACTORS
30 - 50.103.1 Accuracy of X-RAY TUBE VOLTAGE
30 - 50.103.2 Accuracy of X-RAY TUBE CURRENT
30 - 50.103.3 Accuracy of LOADING TIME
30 - 50.103.4 Accuracy of CURRENT TIME PRODUCT
30 - 50.104 Test conditions
31 - 50.104.1 X-RAY TUBE VOLTAGE
31 - 50.104.2 X-RAY TUBE CURRENT
31 - 50.104.3 IRRADIATION TIME
32 - 50.104.4 CURRENT TIME PRODUCT
32 - 50.105 Conditions for measuring AIR KERMA
32 - 50.105.1 Measuring arrangements
32 - 50.105.2 ATTENUATION and RADIATION QUALITY for measurement of AIR KERMA
33 - 50.105.3 Tests for verifying reproducibility
33 - 50.105.4 Tests for verifying linearity
34 - 51 Protection against hazardous output
34 - SECTION 9: ABNORMAL OPERATION AND FAULT CONDITIONS; ENVIRONMENTAL TESTS
34 - SECTION 10: CONSTRUCTIONAL REQUIREMENTS
34 - 56 Components and general assembly
34 - 56.7 Batteries
34 - 56.7.101 Charging mode INTERLOCK
35 - 57 MAINS PARTS, components and layout
35 - 57.10 CREEPAGE DISTANCES and AIR CLEARANCES
38 - APPENDIX ZZ - VARIATIONS TO IEC 60601-2-7 APPLICABLE IN AUSTRALIA AND NEW ZEALAND
40 - Annex AA - Terminology - Index of defined terms
43 - Annex BB - Values of the series R'10 and R'20, ISO 497
44 - Annex CC - Choosing LOADING FACTORS for tests

Specifies particular requirements for the safety of high voltage X-ray generators. It is based on but not equivalent to and reproduced from IEC 60601-2-7:1998 with additional requirements for Australia and New Zealand provided in an appendix. This Standard refers to its Parent Standard, AS/NZS 3200.1.0:1998. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this part.

Committee
HE-003
DocumentType
Standard
ISBN
0 7337 2648 8
Pages
40
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

Addition:This Particular Standard applies to HIGH-VOLTAGE GENERATORS of medical diagnostic X-RAY GENERATORS that operate between 10 kV and 400 kV and in which the electric energy for LOADING an X-RAY TUBE is derived from alternating current SUPPLY MAINS without an essential element of energy storage within the equipment.Note. - An essential element of energy storage is considered not to exist if the energy for LOADING at the LOADING FACTORS defining the NOMINAL ELECTRIC POWER is delivered from the SUPPLY MAINS during LOADING.This Particular Standard applies to:- dental HIGH-VOLTAGE GENERATORS;- sub-assemblies of HIGH-VOLTAGE GENERATORS;- HIGH-VOLTAGE GENERATORS that are integrated with an X-RAY TUBE ASSEMBLY;- HIGH-VOLTAGE GENERATORS of radiotherapy treatment simulators.In this Particular Standard, references to equipment "specified for dental applications" apply only to equipment with NOMINAL X-RAY TUBE VOLTAGES not exceeding 125 kV. For equipment operating above 125 kV the other requirements of this Particular Standard apply without regard to whether dental applications are specified.Where necessary, requirements for X-RAY GENERATORS are given but only where these concern the functioning of the associated HIGH-VOLTAGE GENERATOR.This Particular Standard excludes- equipment for RECONSTRUCTIVE TOMOGRAPHY;- equipment that is battery operated.Rationale. - Requirements to be observed for the equipment excluded from the scope have not been sufficiently investigated. In order not to delay the issue of this Particular Standard such equipment is excluded for the time being.Consideration of those requirements may later allow them to be given as an addendum to this Particular Standard; otherwise they will be dealt with in stand-alone Particular Standards of Part 2 of Publication 601.

Standards Relationship
IEC 60601-2-7:1998 Similar to

First published as AS/NZS 3200.2.7:1994.
Second edition 1999.

AS/NZS 4394:1996 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
AS/NZS 60335.2.90:2006 Household and Similar Electrical Appliances - Safety Particular requirements for commercial microwave ovens
AS/NZS 4173:2018 Safe use of lasers and intense light sources in health care
AS/NZS 60745.1:2009 Hand-held motor-operated electric tools-Safety General requirements (IEC 60745-1 Ed 4, MOD) (Reconfirmed 2020)
AS/NZS 3200.1.3:1996 Approval and test specification - Medical electrical equipment General requirements for safety - Collateral Standard: Requirements for radiation protection in diagnostic X-ray equipment
AS/NZS 3200.2.28:1994 Approval and test specification - Medical electrical equipment Particular requirements for safety - X-ray source assemblies and X-ray tube assemblies for medical diagnosis generators
AS/NZS 4184.3.3:1998 Evaluation and routine testing in medical imaging departments Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA)
AS/NZS 3200.2.32:1994 Approval and test specification - Medical electrical equipment Particular requirements for safety - Associated equipment of X-ray equipment
AS 4774.2-2002 Work in compressed air and hyperbaric facilities - Hyperbaric oxygen facilities
AS/NZS 4184.3.2:1998 Evaluation and routine testing in medical imaging departments Acceptance tests - Imaging performance of mammographic X-ray equipment

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.