AS/NZS 3718:1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water supply - Metal-bodied taps - Specified by performance
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
05-05-1997
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for metal-bodied draw-off taps, mixing taps mechanical (non-thermostatic) and delivery taps in the range of nominal sizes from DN 6 to DN 50 inclusive with continuous working pressures not exceeding 1.4 MPa and continuous operating temperatures not exceeding 80 degrees Celsius.
| Committee |
WS-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 1127 8
|
| Pages |
38
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for copper alloy taps, mixing taps mechanical (non-thermostatic), and tap sets in a range of nominal sizes from DN 6 to DN 50 inclusive with continuous working pressures not exceeding 1.4 MPa and continuous operating temperatures not exceeding 80C.It also specifies requirements for outlets which are an integral part of a tap or mixing tap and the requirements for tapset breaching piece assemblies.Requirements for taps with integral backflow prevention devices are specified in AS 2845.1. Integral pop-up wastes, components and accessories supplied as part of a tap do not require separate certification.Outlets which are a removable part of a tap or mixing tap are currently not covered by this Standard but will become part of this Standard from 1st January 2000.
First published as AS B1-1928T.
Revised and redesignated as AS B35-1931.
Revised and redesignated as AS 1718-1975.
Revised and redesignated (in part) as AS 3718-1988.
Second edition 1990.
Third edition 1992.
Jointly revised and designated AS/NZS 3718:1997.
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 1568-1985 | Copper and copper alloys - Forging stock and forgings |
| AS 1567-1985 | Copper and copper alloys - Wrought rods, bars and sections |
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 3855-1994 | Suitability of plumbing and water distribution systems products for contact with potable water |
| AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| AS 2738.2-1984 | Copper and copper alloys - Compositions and designations - Wrought products |
| AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
| AS/NZS 3500.0:1995 | National Plumbing and Drainage Code Glossary of terms |
| AS 1192-1982 | Electroplated coatings - Nickel and chromium |
| AS 3500.1-1992 | National Plumbing and Drainage Code Water supply |
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 2345-1992 | Dezincification resistance of copper alloys |
| AS 2831-1985 | Thermometers - Solid stem - Long and short - For precision use |
| AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 1881-1986 | ZINC ALLOYS - CASTING INGOTS AND CASTINGS - QUALITY REQUIREMENTS (Reconfirmed 2018) |
| AS 2845.1-1991 | Water supply - Mechanical backflow prevention devices - Materials, design and performance requirements |
| AS 3499-1992 | Authorization requirements for plumbing products - Flexible tubes |
| AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
| AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS 1718-1992 | Water supply - Copper alloy screw-down pattern taps - Specified by dimensions |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.