AS/NZS 3750.1:2008
Current
The latest, up-to-date edition.
Paints for steel structures Epoxy mastic (two-pack) - For rusted steel (Reconfirmed 2020)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
19-05-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8659 6
|
| Pages |
24
|
| ProductNote |
Reconfirmed 11/09/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 11/09/2020 |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. It is intended primarily for use on imperfectly prepared surfaces, i.e., surfaces where residual rust and some previously applied paint of any type are still present. These coatings are also suitable for applications over blast cleaned surfaces where extended service life may be achieved.Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference C32. Commonly known as surface tolerant epoxy, this product may be pigmented with aluminium or micaceous iron oxide. It may also be produced in a limited range of colours and is designed primarily for use as a single coat, high-build, self priming finish.NOTES;1 This paint may be used as detailed for systems EPMI and EPM2 in AS/NZS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy paints is contained in Appendix B.
Originated as AS 3750.1-1994.
Revised and redesignated AS/NZS 3750.1:2008.
| AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS 1580.108.2-2004 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019) |
| AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
| AS 1627.2-2002 | Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017) |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS 1627.9-2002 | Metal finishing - Preparation and pretreatment of surfaces Pictorial surface preparation standards for painting steel surfaces (Reconfirmed 2017) |
| AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
| AS 2700-1996 | Colour Standards for general purposes - Swatches |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS 1580.105.2-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
| AS 1580.408.2-2004 | Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019) |
| AS 1580.402.1-2003 | Paints and related materials - Methods of test Bend test |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 2854-2004 | Tinplate cans for general use |
| AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
| AS/NZS 1580.481.1.6:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013) |
| AS 2905-2005 | Steel drums |
| AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
| AS 3530-1988 | Solvents - Mineral turpentine and white spirit |
| AS 1580.452.2-2002 | Paints and related materials - Methods of test Resistance to corrosion - Salt droplet test |
| AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS 1580.105.1-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning |
| AS 1517-1991 | Tinplate and blackplate |
| AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
| AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
| AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
| AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
| AS 1580.454.1-2002 | Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.