AS/NZS 3750.7:1994

1 - AS/NZS 3750.7:1994 PAINTS FOR STEEL STRUCTURES - ALUMINIUM PAINT
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 REFERENCED DOCUMENTS
6 - 1.3 DEFINITIONS
6 - 1.3.1 Aluminium paint
6 - 1.4 SAFETY PRECAUTIONS
7 - SECTION 2 MATERIAL REQUIREMENTS
7 - 2.1 GENERAL
7 - 2.2 COMPOSITION
7 - 2.3 CONDITIONS OF TEST
7 - 2.4 LIQUID PAINT
7 - 2.4.1 Condition in container
7 - 2.4.2 Volume solids
7 - 2.4.3 Storage properties
7 - 2.5 APPLICATION PROPERTIES
7 - 2.5.1 General
7 - 2.5.2 Brushing
7 - 2.5.3 Rolling
7 - 2.5.4 Spraying
8 - 2.6 APPLIED FILM
8 - 2.6.1 Surface-dry time
8 - 2.6.2 Hard-dry time
8 - 2.6.3 Recoating properties
8 - 2.6.4 Resistance to weathering
8 - 2.6.5 Resistance to water
8 - 2.6.6 Colour
11 - SECTION 3 PACKAGING AND LABELLING
11 - 3.1 PACKAGING
11 - 3.2 LABELLING
12 - APPENDIX A - PURCHASING GUIDELINES
12 - A1 GENERAL
12 - A2 INFORMATION TO BE SUPPLIED WITH THE ENQUIRY OR ORDER
13 - APPENDIX B - INFORMATION ON THE USE AND APPLICATION OF ALUMINIUM PAINT
13 - B1 SCOPE
13 - B2 MANUFACTURER’S TECHNICAL DATA
13 - B3 SAFETY PRECAUTIONS
13 - B4 APPLICATION AND USE
13 - B5 STORAGE CONDITIONS
14 - APPENDIX C - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
14 - C1 SCOPE
14 - C2 STATISTICAL SAMPLING
14 - C3 PRODUCT CERTIFICATION
14 - C4 SUPPLIER’S QUALITY SYSTEM
15 - C5 OTHER MEANS OF ASSESSMENT
16 - APPENDIX D - REFERENCED DOCUMENTS
18 - APPENDIX E - PREPARATION OF PANELS FOR TESTING RESISTANCE TO WATER AND WEATHERING
18 - E1 SCOPE
18 - E2 TEST PANEL MATERIAL
18 - E3 COATING OF PANELS

Provides requirements for aluminium coloured finishing paints that are intended to protect iron and steel against atmospheric corrosion.

This Standard specifies requirements for a bright, aluminium coloured finish paint based on alkyd, phenolic or coumarone-indene resins intended to protect iron and steel against corrosion. Paint specified in the Standard is referred to in AS 2312 as Paint Reference No. 19. It may be suitable for application by brush, roller or spray. This paint will provide heat reflectance and medium-term protection from corrosion to suitably primed steelwork located in an industrial atmospheric environment.NOTES:1 This paint may be used as described for systems SP4-B, SP5-B, MP3-B, MP7-B and MSALP-A in AS 2312.2 Some paints may comply with Paint Reference No. 28 and be used for system HR2 in AS 2312.3 Alkyd aluminium paint may be provided with the aluminium paste as a second component, to be mixed prior to use.4 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.5 Care should be taken that aluminium paint is not used in an acidic or caustic environment. Additional information on the use and application of aluminium paint is provided in Appendix B.6 Alternative methods for determining compliance with this Standard are contained in Appendix C.

First published as Joint Standard AS/NZS 3750.7:1994.