AS/NZS 4129:2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fittings for polyethylene (PE) pipes for pressure applications
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
03-04-2000
Specifies requirements for fittings to be used with polyethylene pipe manufactured in accordance with AS/NZS 4130:1997 or AS 2698.2-1985. This Standard is applicable to fittings manufactured for the conveyance of water, gaseous fuels and other fluids including compressed air.
Committee |
PL-006
|
DocumentType |
Standard
|
ISBN |
0 7337 3264 X
|
Pages |
27
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for fittings to be used with polyethylene pipe manufactured in accordance with AS/NZS 4130 or AS 2698.2. This Standard is applicable to fittings manufactured for the conveyance of water, gaseous fuels, and other fluids including compressed air. For continuous use at temperatures above 40°C refer to the manufacturer.The requirements of Section 1 apply to fittings manufactured to comply with all Sections of the Standard except where subsequent sections detail or exempt specific requirements.Installation requirements are included in AS 2033, AS 3723 and AS 4041 as appropriate.Methods of demonstrating compliance with this Standard are given in Appendix A.
First published as AS 1460-1973.
Revised and redesignated as AS 1460.1-1989 and AS 1460.2-1989.
AS/NZS 4129(Int) first published 1997.
AS 1460.1-1989, AS 1460.2-1989 and AS/NZS 4129(Int):1997 jointly revised, amalgamated and redesignated as AS/NZS 4129:2000.
AS 3855-1994 | Suitability of plumbing and water distribution systems products for contact with potable water |
HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS/NZS 3500.0:1995 | National Plumbing and Drainage Code Glossary of terms |
AS 4041-1998 | Pressure piping |
AS/NZS 4130:1997 | Polyethylene (PE) pipes for pressure applications |
AS/NZS 4331.2:1995 | Metallic flanges Cast iron flanges (Reconfirmed 2020) |
AS/NZS 4131:1997 | Polyethylene (PE) compounds for pressure pipes and fittings |
AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
AS 2698.2-2000 | Plastics pipes and fittings for irrigation and rural applications Polyethylene rural pipe (Reconfirmed 2017) |
AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
AS 2345-1992 | Dezincification resistance of copper alloys |
AS/NZS 4020:1999 | Products for use in contact with drinking water |
AS 3723-1989 | Installation and maintenance of plastics pipe systems for gas |
AS 3707-1989 | Method for testing pressure cycling resistance of pipes and fittings |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS/NZS 4331.3:1995 | Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020) |
AS/NZS 4158.1:1994 | Polymeric coatings on valves and fittings for water industry purposes Thermal-bonded coatings |
AS/NZS 1462.8:1998 | Methods of test for plastics pipes and fittings Method of test for infiltration |
AS 2033-1980 | Installation of polyethylene pipe systems |
AS/NZS 1547:2012 | On-site domestic wastewater management |
AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
AS/NZS 2492:2007 | Cross-linked polyethylene (PE-X) pipes for pressure applications |
ATS 5200.490-2007 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018) |
AS/NZS 2033:2008 | Installation of polyethylene pipe systems |
AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
ATS 5200.478-2006 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications |
AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
ATS 5200.467-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
AS/NZS 3500.5:2000 | Plumbing and Drainage Domestic installations |
MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
AS 4796-2001 | Water supply - Metal bodied and plastic bodied ball valves for property service connection |
AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
ATS 5200.462-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
ATS 5200.458-2004 | Technical Specification for plumbing and drainage products Universal transition fitting |
AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.