AS/NZS 4455.2:2010
Current
The latest, up-to-date edition.
Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
02-09-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.Provides the minimum requirements for pavers and flags for use in pavements. Proposed as an Australian/New Zealand Standard.
| Committee |
BD-026
|
| DocumentType |
Standard
|
| ISBN |
978 0 7337 9665 4
|
| Pages |
17
|
| ProductNote |
Reconfirmed 14/08/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 14/08/2020 |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies minimum requirements for pavers and flags for use in pavements carrying road traffic and pedestrians only.The pavers and flags covered by this Standard include those made of concrete and fired clay (with or without shale).NOTES:1 For New Zealand pavements, the design of segmental pavements is set out in NZS 3116.2 Means for demonstrating compliance with the requirements for strength are given in Appendix A.3 Guidance on means for demonstrating compliance with this Standard is given in Appendix B.4 Guidance on determination of characteristic value is given in Appendix C.5 Purchasing guidelines are given in Appendix D.6 Guidance on optional additional testing is given in Appendix E.7 There are non-rectilinear shapes for paving that are not illustrated in this Standard. Nevertheless, these are covered by this Standard with the provision that not all test methods mentioned may be applicable to such shapes.
Originated in Australia as AS A21-1934.
Final Australian edition AS 1653-1985.
Originated in New Zealand as NZSS 366-1943.
Second edition NZS 3116:1991.
Jointly revised, amalgamated and redesignated AS/NZS 4455:1997.
AS/NZS 4455:1997 revised and designated, in part, AS/NZS 4455.2:2010.
| AS 3942-1993 | Quality control - Variables charts - Guide |
| AS/NZS 4456.2:2003 | Masonry units, segmental pavers and flags - Methods of test Assessment of mean and standard deviation (Reconfirmed 2023) |
| AS/NZS 4456.13:2003 | Masonry units, segmental pavers and flags - Methods of test Determining pitting due to lime particles (Reconfirmed 2023) |
| AS/NZS 4456.8:2003 | Masonry units, segmental pavers and flags - Methods of test Determining moisture content, dry density and ambient density (Reconfirmed 2023) |
| AS/NZS 4456.10:2003 | Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023) |
| AS/NZS 4456.3:2003 | Masonry units, segmental pavers and flags - Methods of test Determining dimensions |
| AS/NZS 4456.17:2003 | Masonry units, segmental pavers and flags - Methods of test Determining initial rate of absorption (suction) (Reconfirmed 2023) |
| AS/NZS 4456.9:2003 | Masonry units and segmental pavers and flags - Methods of test Determining abrasion resistance |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS ISO 9001:2008 | Quality management systems - Requirements |
| AS/NZS 4456.5:2003 | Masonry units, segmental pavers and flags - Methods of test Determining the breaking load of segmental pavers and flags |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 4456.6:2003 | Masonry units, segmental pavers and flags - Methods of test Determining potential to effloresce (Reconfirmed 2023) |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS/NZS 4456.14:2003 | Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties (Reconfirmed 2023) |
| AS/NZS 4456.18:2003 | Masonry units, segmental pavers and flags - Methods of test Determining tensile strength of masonry units and segmental pavers (Reconfirmed 2023) |
| AS/NZS 4586:2004 | Slip resistance classification of new pedestrian surface materials |
| AS/NZS 4456.1:2003 | Masonry units, segmental pavers and flags - Methods of test Sampling for test (Reconfirmed 2023) |
| AS/NZS 4456.19:2003 | Masonry units, segmental pavers and flags - Methods of test Determination of bow |
| AS/NZS 4456.11:2003 | Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion (Reconfirmed 2023) |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS/NZS 4456.16:2003 | Masonry units, segmental pavers and flags - Methods of test Determining permeability to water (Reconfirmed 2023) |
| AS 2699.2:2020 | Built-in components for masonry construction Connectors and accessories |
| AS 2699.1:2020 | Built-in components for masonry construction Wall ties |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS 3727.1:2016 | Pavements Residential |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.