AS/NZS 4455.3:2008
Current
The latest, up-to-date edition.
Masonry units, pavers, flags and segmental retaining wall units Segmental retaining wall units (Reconfirmed 2020)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
30-06-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.Sets out requirements for segmental retaining wall units, to facilitate design and purchasing.
| Committee |
BD-026
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8802 5
|
| Pages |
15
|
| ProductNote |
Reconfirmed 14/08/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 14/08/2020 |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for units for use in segmental retaining walls, including units for walls built in accordance with AS 4678.NOTE: Masonry units for retaining walls that are designed in accordance with AS 3700 or NZS 4230 and constructed with mortared joints are covered by AS/NZS 4455.1.Segmental retaining wall units covered by this Standard include those made of the following materials:(a) Concrete.(b) Dimension stone (cut or dressed).(c) Fired clay (with or without shale).NOTE: Dimension stone has a wide variety of characteristics that are not fully covered by the requirements of this Standard. Test methods different from those specified in this Standard may be required for dimension stone.Means for demonstrating compliance with the requirements for strength are given in Appendix A.NOTES:1 Guidance on means for demonstrating compliance with this Standard is given in Appendix B.2 Guidance on determination of characteristic value is given in Appendix C.3 Guidance on the content of a purchasing agreement is given in Appendix D.4 Guidance on optional testing is given in Appendix E.
Originated in Australia as AS A21-1934.
Final Australian edition AS 1653-1985.
Originated in New Zealand as NZSS 366-1943.
Final New Zealand edition NZS 3116.1:1991.
Jointly revised, amalgamated and redesignated AS/NZS 4455:1997.
AS/NZS 4455:1997 revised and designated, in part, AS/NZS 4455.3:2008.
| AS/NZS 4456.16:2003 | Masonry units, segmental pavers and flags - Methods of test Determining permeability to water (Reconfirmed 2023) |
| AS/NZS 4456.7:2003 | Masonry units, segmental pavers and flags - Methods of test Determining core percentage and material thickness (Reconfirmed 2023) |
| AS 3942-1993 | Quality control - Variables charts - Guide |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 4456.3:2003 | Masonry units, segmental pavers and flags - Methods of test Determining dimensions |
| AS/NZS 4456.8:2003 | Masonry units, segmental pavers and flags - Methods of test Determining moisture content, dry density and ambient density (Reconfirmed 2023) |
| AS/NZS 4456.11:2003 | Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion (Reconfirmed 2023) |
| AS/NZS 4456.13:2003 | Masonry units, segmental pavers and flags - Methods of test Determining pitting due to lime particles (Reconfirmed 2023) |
| AS/NZS 4456.14:2003 | Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties (Reconfirmed 2023) |
| AS/NZS 4456.15:2003 | Masonry units, segmental pavers and flags - Methods of test Determining lateral modulus of rupture (Reconfirmed 2023) |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS/NZS 4456.2:2003 | Masonry units, segmental pavers and flags - Methods of test Assessment of mean and standard deviation (Reconfirmed 2023) |
| AS/NZS 4456.17:2003 | Masonry units, segmental pavers and flags - Methods of test Determining initial rate of absorption (suction) (Reconfirmed 2023) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 4456.6:2003 | Masonry units, segmental pavers and flags - Methods of test Determining potential to effloresce (Reconfirmed 2023) |
| AS/NZS 4456.4:2003 | Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units |
| AS/NZS 4456.10:2003 | Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023) |
| AS/NZS 4456.12:2003 | Masonry units and segmental pavers and flags - Methods of test Determining coefficients of contraction (Reconfirmed 2023) |
| AS 2699.2:2020 | Built-in components for masonry construction Connectors and accessories |
| AS 2699.1:2020 | Built-in components for masonry construction Wall ties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.