AS/NZS 5078:2007

1 - AS/NZS 5078:2007 DOMESTIC SOLID FUEL BURNING APPLIANCES-PELLET HEATERS-METHOD FOR DETERMINATION OF POWER OUTPUT AND...
4 - PREFACE
5 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 APPLICATION
7 - 1.2.1 General
7 - 1.2.2 Included appliances
7 - 1.2.3 Excluded appliances
7 - 1.3 REFERENCED DOCUMENTS
7 - 1.4 DEFINITIONS
8 - 1.4.1 Appliance operating instructions
8 - 1.4.2 Average efficiency
8 - 1.4.3 Burn rate
8 - 1.4.4 Calorimeter room
8 - 1.4.5 Efficiency (overall efficiency or appliance efficiency)
8 - 1.4.6 Hopper
8 - 1.4.7 Inlet air damper
8 - 1.4.8 Peak power
8 - 1.4.9 Pellet fuel
8 - 1.4.10 Pellet fuel feed assembly
8 - 1.4.11 Test burn period
8 - 1.4.12 Shall
8 - 1.4.13 Should
8 - 1.5 PRINCIPLE
9 - SECTION 2 APPARATUS
9 - 2.1 AMBIENT TEMPERATURE MEASUREMENT SYSTEM
9 - 2.2 APPLIANCE TEMPERATURE MEASUREMENT SYSTEM
9 - 2.3 WEIGHT DETERMINATION EQUIPMENT
9 - 2.4 MASS FLOW MEASUREMENT SYSTEM
9 - 2.5 AMBIENT AIR PRESSURE MEASUREMENT SYSTEM
9 - 2.6 ANEMOMETER
10 - SECTION 3 TEST ENCLOSURE AND FLUE
10 - 3.1 GENERAL
10 - 3.2 ROOM INSULATION
10 - 3.3 LENGTH OF FLUE
10 - 3.4 EXPOSED FLUE WITHIN CALORIMETER ROOM
10 - 3.4.1 Freestanding appliances
10 - 3.4.2 Fireplace-insert appliances
10 - 3.5 AIR TEMPERATURES
10 - 3.6 AIR PRESSURE
11 - 3.7 WALL TEMPERATURES
11 - 3.8 AIR FLOW
11 - 3.9 CALIBRATION
11 - 3.9.1 General
11 - 3.9.2 Calorimeter room
11 - 3.9.3 Barometer
11 - 3.9.4 Anemometer
11 - 3.9.5 Weighing instruments
14 - SECTION 4 MEASUREMENT ACCURACY
14 - 4.1 TEMPERATURE AND MASS FLOW
14 - 4.2 CALORIMETER ROOM SCALES
15 - SECTION 5 TEST FUEL
16 - SECTION 6 TEST PROCEDURE
16 - 6.1 PREPARATION BEFORE TESTING
16 - 6.1.1 Conditioning burn
16 - 6.1.2 Post-conditioning adjustment
16 - 6.1.3 Ash
16 - 6.1.4 Fire lighting
16 - 6.1.5 Pretest burn cycle
16 - 6.2 FUEL LOADING
16 - 6.3 BURN RATES
17 - 6.4 TEST BURN PERIOD
17 - 6.5 NUMBER OF BURN PERIODS
17 - 6.6 DATA-RECORDING INTERVAL
17 - 6.7 OPERATION OF THE APPLIANCE
17 - 6.7.1 Burn-rate control
17 - 6.7.2 Fans
17 - 6.7.3 Other controls
17 - 6.7.4 Automatic controls
18 - 6.8 APPLIANCES WITH A WATER-HEATING FACILITY
18 - 6.9 DUCTED APPLIANCES
19 - SECTION 7 EFFICIENCY
20 - SECTION 8 CALCULATION AND REPORTING OF RESULTS
20 - 8.1 CALCULATIONS
20 - 8.1.1 Average power
20 - 8.1.2 Heat output
20 - 8.1.3 Energy input
20 - 8.1.4 Efficiency
20 - 8.1.5 Burn rate
20 - 8.2 REPORT
21 - SECTION 9 MARKING
21 - 9.1 GENERAL
21 - 9.2 COMPULSORY PERMANENT MARKING
21 - 9.3 FUEL TYPES
21 - 9.4 ADDITIONAL MARKING
22 - 9.5 RETESTING EXEMPTION

Specifies a method for the determination of the average efficiency and average thermal power output from automatic feed, pellet fuel-burning room heaters, that are intended to burn wood pellets or other suitable solid fuel.

This Standard sets out a method for the determination of the average efficiency and average thermal power output from a domestic automatic continuous feed, pellet fuel-burning appliance.

First published as AS/NZS 5078:2007.