BS 3212:1991
|
Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
AS/NZS 3500.4:2018
|
Plumbing and drainage Heated water services |
AS 4617:2018
|
Manually operated gas valves |
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments)
|
Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 60079.14:2017
|
Explosive atmospheres Design selection, erection and initial inspection (IEC 60079-14:2013 (ED.5.0) MOD) |
AS 4627:2017
|
Quick-connect devices for gas |
AS 3688:2016
|
Water supply and gas systems - Metallic fittings and end connectors |
AS/NZS 60079.29.2:2016
|
Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
AS 2473.2:2015
|
Valves for compressed gas cylinders Outlet connections (threaded) and stem (inlet) threads |
AS/NZS 1596:2014
|
The storage and handling of LP Gas |
AS/NZS 2208:1996
|
Safety glazing materials in buildings |
AS/NZS 1734:1997
|
Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020) |
AS/NZS 1530.3:1999
|
Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016) |
AS D26-1972
|
Tube fittings with dryseal American standard taper pipe and unified threads for automotive and industrial use (imperial units) (Reconfirmed 2018) |
AS/NZS 5601.1:2013
|
Gas installations General installations |
AS 4629-2005
|
Automatic shut off valves and vent valves (Reconfirmed 2018) |
AS 2738-2000
|
Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
AS 2030.4-1985
|
The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated |
AS 2030.2-1996
|
The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene |
ASTM A 269/A269M : 2015
|
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
AS/NZS 1869:2012
|
Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas |
AS 1397-2011
|
Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
AS 3814:2018
|
Industrial and commercial gas-fired appliances |
AS/NZS 60079.25:2011
|
Explosive atmospheres Intrinsically safe electrical systems |
AS 1572-1998
|
Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
AS 1530.1-1994
|
Methods for fire tests on building materials, components and structures Combustibility test for materials (Reconfirmed 2016) |
AS 1432-2004
|
Copper tubes for plumbing, gasfitting and drainage applications |
AS 4621:2019
|
Regulator for use with liquefied petroleum - Vapour phase |
AS 2030.5-2009
|
Gas cylinders Filling, inspection and testing of refillable cylinders |
AS 2030.1-2009
|
Gas cylinders General requirements |
AS ISO 7.1-2008
|
Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation |
AS 1357.1:2019
|
Valves primarily for use in heated water systems Protection valves |
AS 1906.1:2017
|
Retroreflective materials and devices for road traffic control purposes Retroreflective sheeting |
AS/NZS 3000:2018
|
Electrical installations (known as the Australian/New Zealand Wiring Rules) |
ASTM C 518 : 2017
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
EN 50291-1:2018
|
Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements |