AS/NZS 60112:2003
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
14-11-2003
The objective of this Standard is to provide a test method for manufacturers, designers, testing laboratories and similar organizations in order to indicate the relative resistance to tracking of solid electrical insulating materials when exposed to moisture and surface contamination.
Committee |
EL-002
|
DocumentType |
Standard
|
ISBN |
0 7337 5684 0
|
Pages |
16
|
PublisherName |
Standards Australia
|
Status |
Withdrawn
|
Supersedes |
This International standard specifies the method of test for the determination of the proof andcomparative tracking indices of solid insulating materials on pieces taken from parts ofequipment and on plaques of material using alternating voltages.The standard provides for the determination of erosion when required.NOTE 1 The proof tracking index is used as an acceptance criterion as well as a means for the quality control of materials and fabricated parts. The comparative tracking index is mainly used for the basic characterization and comparison of the properties of materials.Test results cannot be used directly for the evaluation of safe creepage distances whendesigning electrical apparatus.NOTE 2 This test discriminates between materials with relatively poor resistance to tracking, and those with moderate or good resistance, for use in equipment which can be used under moist conditions. More severe tests, of longer duration are required for the assessment of performance of materials for outdoor use, utilizing higher voltages and larger test specimens (see the inclined plane test of IEC 60587). Other test methods such as the inclined method may rank materials in a different order from the drop test given in this standard.
Standards | Relationship |
IEC 60112:2003 | Identical |
IEC 60112:2003+AMD1:2009 CSV | Identical |
First published in Australia as part of AS 2420-1980.
Second edition 1983.
Third edition 1987.
First published in New Zealand as part of AS 2420-1987.
Jointly revised and redesignated in part as AS/NZS 4695.112:1996.
Jointly revised and redesignated as AS/NZS 60112:2003.
AS/NZS 61008.1:2011 | Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 3.0 (2010) MOD) |
AS/NZS 3161:2005 | Approval and test specification - Thermostats and energy regulators |
AS 62310.1-2005 | Static transfer systems (STS) General and safety requirements (Reconfirmed 2016) |
AS/NZS 61534.1:2008 | Powertrack systems General requirements (IEC 61534-1, Ed. 1 (2003) MOD) |
AS/NZS 3140:2007 | Approval and test specification - Edison-type screw lampholders |
AS 60947.4.1-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters |
AS 60947.5.1-2004 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
AS/NZS 60950.1:2011 | Information technology equipment - Safety General requirements (IEC 60950-1, Ed. 2.0 (2005), MOD) |
AS/NZS 60745.1:2009 | Hand-held motor-operated electric tools-Safety General requirements (IEC 60745-1 Ed 4, MOD) (Reconfirmed 2020) |
AS 62103-2006 | Electronic equipment for use in power installations |
AS/NZS 3123:2005 | Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016) |
AS/NZS 60898.1:2004 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD) |
AS/NZS 60065:2012 | Audio, video and similar electronic apparatus - Safety requirements (IEC 60065, Ed.7.2 (2011) MOD) |
HB 242-2007 | High voltage mining equipment for use underground (Reconfirmed 2019) |
AS/NZS 3117:2007 | Approval and test specification - Bayonet lampholders |
AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
AS/NZS 61009.1:2011 | Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 3.0 (2010) MOD) |
AS/NZS 60320.1:2004 | Appliance couplers for household and similar general purposes General requirements (IEC 60320-1, Ed. 2.0 (2001) MOD) |
AS/NZS 4763(INT):2006 | Safety of Portable Inverters |
AS/NZS 60079.15:2011 | Explosive atmospheres Equipment protection by type of protection 'n' |
AS 60974.1-2006 | Arc welding equipment Welding power sources (IEC 60974-1:2000, MOD) |
AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
AS/NZS 4871.3:2010 | Electrical equipment for mines and quarries Substations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.