• AS/NZS 61000.3.2:2007

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD)

    Available format(s):  Hardcopy, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  26-06-2021

    Language(s): 

    Published date:  11-09-2007

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Proposes harmonic requirements for equipment with a current input less than or equal to 16 A intended for connection to an electrical network.

    General Product Information - (Show below) - (Hide below)

    Committee EL-034
    Document Type Standard
    Publisher Standards Australia
    Status Superseded
    Superseded By
    Supersedes
    Under Revision

    History - (Show below) - (Hide below)

    First published in Australia as AS 2279.1-1979.
    Second edition 1991.
    Jointly revised and redesignated AS/NZS 61000.3.2:1998.
    Second edition 2003.
    Third edition 2007. Originated in Australia as AS 2279.1-1979. Jointly revised and redesignated as AS/NZS 61000.3.2:1998. Previous edition 2003. Third edition 2007.

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS/NZS 61000.4.7:2007 Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
    AS/NZS 61000.3.4:2007 Electromagnetic compatibility (EMC) Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (Reconfirmed 2018)
    AS/NZS 61000.2.2:2003 Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (Reconfirmed 2013)
    AS/NZS 61000.3.12:2006 Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A per phase

    Standards Referencing This Book - (Show below) - (Hide below)

    AS/NZS 61000.6.3:2012 Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments
    AS/NZS 4847.2(INT):2008 Self-ballasted lamps for general lighting services Minimum Energy Performance Standards (MEPS) requirements
    AS/NZS 61058.1:2008 Switches for appliances General requirements (IEC 61058-1, Ed. 3.1 (2000), MOD)
    AS 2703-2008 Vehicle loop detector sensors
    TR IEC 61000.1.4:2012 Electromagnetic compatibility (EMC) General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
    AS/NZS ISO 10535:2011 Hoists for the transfer of disabled persons - Requirements and test methods
    AS/NZS 4871.1:2010 Electrical equipment for mines and quarries General requirements
    AS/NZS 60745.1:2009 Hand-held motor-operated electric tools-Safety General requirements (IEC 60745-1 Ed 4, MOD) (Reconfirmed 2020)
    AS/NZS 61000.4.13:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
    AS/NZS 61000.4.7:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
    AS IEC 62040.3-2012 Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
    AS/NZS 3200.1.2:2005 Medical electrical equipment General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
    AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
    AS/NZS 61000.3.3:2012 Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
    AS/NZS 4847.1(INT):2008 Self-ballasted lamps for general lighting services Test methods - Energy performance
    AS/NZS IEC 61000.3.12:2013 Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase
    AS/NZS 60669.2.1:2013 Switches for household and similar fixed electrical installations Particular requirements - Electronic switches (IEC 60669-2-1, Ed.4.1 (2009) MOD)
    AS/NZS 4871.1:2012 Electrical equipment for mines and quarries General requirements
    AS/NZS 4847.1:2010 Selfballasted lamps for general lighting services Test methods - Energy performance (Reconfirmed 2020)
    AS/NZS 3007:2013 Electrical equipment in mines and quarries - Surface installations and associated processing plant
    AS/NZS 4847.2:2010 Self ballasted lamps for general lighting services Minimum Energy Performance Standards (MEPS) requirements
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective