ASME A112.19.2 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CERAMIC PLUMBING FIXTURES
Hardcopy , PDF
12-10-2019
01-01-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preface
0 Introduction
1 Scope
2 Reference publications
3 Definitions and abbreviations
4 General requirements
5 Flushing devices used with fixtures
6 Tests - Materials, finishes, structural integrity, and seals
7 Water closet tests
8 Urinal tests
9 Markings, packaging, and installation instructions and other
literature
Annexes
A (informative) - Suggested formats for reporting test results
B (informative) - Unit conversion criteria
Describes vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings.
| DevelopmentNote |
Supersedes & incorporates ASME A112.19.2M. (07/2004) Supersedes & incorporates ASME A112.19.9M. (08/2008) Supersedes & incorporates ASME A112.19.13. (09/2009) Supersedes & incorporates ASME A112.19.6. (02/2011) Also numbered as CSA B45.1. (11/2013)
|
| DocumentType |
Standard
|
| Pages |
166
|
| ProductNote |
NEW CHILD ADD A IS NOW ADDED
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASME A112.3.4 : 2013 | PLUMBING FIXTURES WITH PUMPED WASTE AND MACERATING TOILET SYSTEMS |
| CSA Z8000 : 2011 : INC : UPD 1 : 2013 | CANADIAN HEALTH CARE FACILITIES |
| CSA Z317.1 : 2016 | SPECIAL REQUIREMENTS FOR PLUMBING INSTALLATIONS IN HEALTH CARE FACILITIES |
| CSA B45.2 : 2013 | ENAMELLED CAST IRON AND ENAMELLED STEEL PLUMBING FIXTURES |
| UFC 3-420-01 : Change 10 | UNIFIED FACILITIES CRITERIA - PLUMBING SYSTEMS |
| ASME A112.19.5-2017/CSA B45.15-17 | Flush valves and spuds for water closets, urinals, and tanks |
| A112.19.1/CSA B45.2:2013 | ENAMELLED CAST IRON AND ENAMELLED STEEL PLUMBING FIXTURES |
| CSA B45.8 : 2013 | TERRAZZO, CONCRETE, AND NATURAL STONE PLUMBING FIXTURES |
| ASME A112.19.5 : 2011 | FLUSH VALVES AND SPUDS FOR WATER CLOSETS, URINALS, AND TANKS |
| ASME A112.19.3/CSA B45.4 : 2017 | STAINLESS STEEL PLUMBING FIXTURES |
| CSA B125.37 : 2015 | PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
| ASSE 1037 : 2015 | PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
| CSA B45.13 : 2014 | VACUUM WASTE-COLLECTION SYSTEMS |
| CSA B45.6 : 2011 | NONRECIRCULATING TOILETS, VACUUM TOILETS, AND WASTE-HOLDING TANKS FOR USE IN RECREATIONAL VEHICLES |
| CSA B125.12 : 2015 | ANTI-SIPHON FILL VALVES FOR WATER CLOSET TANKS |
| CSA B45.16 : 2015 | PERSONAL HYGIENE DEVICES FOR WATER CLOSETS |
| CSA B45.12 : 2013 | ALUMINUM AND COPPER PLUMBING FIXTURES |
| ASHRAE 189.1 : 2014 | DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS |
| CSA Z8000 : 2011 : R2016 | CANADIAN HEALTH CARE FACILITIES |
| ASME A112.19.3-2017/CSA B45.4-17 | Stainless steel plumbing fixtures |
| ASHRAE 189.1 SPANISH : 2009 | STANDARD FOR THE DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS |
| CSA B45.11:17/IAPMO Z401-2017 | Glass plumbing fixtures |
| ASME A112.6.2 : 2017 | FRAMING-AFFIXED SUPPORTS (CARRIERS) FOR OFF-THE-FLOOR PLUMBING FIXTURES |
| CSA Z8000 : 2011 | CANADIAN HEALTH CARE FACILITIES |
| ASME A112.4.2 : 2015 | PERSONAL HYGIENE DEVICES FOR WATER CLOSETS |
| ASHRAE/ASHE 189.3 : 2017 | DESIGN, CONSTRUCTION, AND OPERATION OF SUSTAINABLE HIGH-PERFORMANCE HEALTH CARE FACILITIES |
| ASME A112.19.5 : 2011 : R2016 | FLUSH VALVES AND SPUDS FOR WATER CLOSETS, URINALS, AND TANKS |
| ASME A112.19.14 : 2013 | SIX-LITER WATER CLOSETS EQUIPPED WITH A DUAL FLUSHING DEVICE |
| CSA B45.6 : 2011 : R2016 | NONRECIRCULATING TOILETS, VACUUM TOILETS, AND WASTE-HOLDING TANKS FOR USE IN RECREATIONAL VEHICLES |
| CSA B45.9 : 2013 | PLUMBING FIXTURES WITH PUMPED WASTE AND MACERATING TOILET SYSTEMS |
| CSA B45.7 : 2011 : R2016 | SELF-CONTAINED, RECIRCULATING, CHEMICALLY CONTROLLED TOILETS FOR USE IN RECREATIONAL VEHICLES |
| CSA B45.7 : 2011 | SELF-CONTAINED, RECIRCULATING, CHEMICALLY CONTROLLED TOILETS FOR USE IN RECREATIONAL VEHICLES |
| ASSE 1002-2015/ ASME A112.1002-2015/ CSA B125.12 : 2015 | ANTI-SIPHON FILL VALVES FOR WATER CLOSET TANKS |
| CSA B125.3 : 2012 | PLUMBING FITTINGS |
| ASME A112.19.14 : 2013 | SIX-LITER WATER CLOSETS EQUIPPED WITH A DUAL FLUSHING DEVICE |
| ASME A112.19.5-2017/CSA B45.15-17 | Flush valves and spuds for water closets, urinals, and tanks |
| CSA B125.2 : 2015 | PLUMBING WASTE FITTINGS |
| ASME A112.18.2 : 2015 | PLUMBING WASTE FITTINGS |
| ASTM D 3311 : 2017 : REDLINE | Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns |
| ASSE 1037 : 2015 | PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
| ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
| CSA B1800 SERIES : 2015 | THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM |
| ASME A112.19.19 : 2016 | VITREOUS CHINA NON-WATER URINALS |
| CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
| CSA B181.2 : 2011 GEN INS 1 11 | POLYVINYLCHLORIDE (PVC) AND CHLORINATED POLYVINYLCHLORIDE (CPVC) DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS |
| ASME A112.19.12 : 2014 | WALL MOUNTED, PEDESTAL MOUNTED, ADJUSTABLE, ELEVATING, TILTING, AND PIVOTING LAVATORY, SINK, AND SHAMPOO BOWL CARRIER SYSTEMS AND DRAIN WASTE SYSTEMS |
| CSA B181.1 : 2011 GEN INS 1 11 | ACRYLONITRILE-BUTADIENE-STYRENE (ABS) DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.