![header thumbnail](/images/publishers\asme_cover.gif)
ASME A112.19.2M : 98 SUPP 1
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
![header thumbnail](/images/publishers\asme_cover.gif)
VITREOUS CHINA PLUMBING FIXTURES
06-01-2024
12-01-2013
1 General
1.1 Scope
1.2 Units of Measurement
2 Reference Standards
3 Definitions
4 Vitreous China Requirements
4.1 Absorption
4.2 Crazing
4.3 Thickness
4.4 Warpage
4.5 Glazed Surfaces
4.6 Finish
4.7 Component Material Requirements
4.8 Load Tests for Wall-Mounted Fixtures
5 Dimensional Requirements
5.1 Tolerances and Dimensions
5.2 Water Closets
5.3 Trap Seal Depth
5.4 Water Surface Area
5.5 Ball Pass (Trapway) Diameter
5.6 Spud Sizes
5.7 Water Closet Bowl Heights
5.8 Top Contour
5.9 Lavatories
5.10 Urinals
5.11 Drinking Fountains
5.12 Bidets
6 Flushing Devices
6.1 Requirements for Flushing Devices
6.2 Gravity Flush Tanks
6.3 Pressurized Flushing Devices
6.4 Plastic Water Closet Tanks
7 Markings and Installation Instructions
7.1 Permanent Markings on Product
7.2 Nonpermanent Markings on Products
7.3 Marking Requirements for Product Packaging
7.4 Installation Instructions
8 Vitreous China and Alternate Materials Test Procedures
8.1 Absorption (Boiling) Test
8.2 Crazing Test
8.3 Warpage Test
8.4 Evaluation of Surface Finish
8.5 Auger Test
8.6 Insulated Tank Test
8.7 Load Tests
8.8 Joint Seal Test
8.9 Lavatory or Bidet Overflow Test
Figures
1 Typical Outlet for Floor-Mounted Bottom-Outlet Water Closets
2 Typical Outlet Details for Rear-Outlet and
Rear-Spigot-Outlet Water Closet Bowls
3 Typical Bolt Hole Spacing for Wall-Mounted Water Closets
4 Roughing-In and Seat Bolt Hole Requirements for
Floor-Outlet Water Closets
5 Lavatory and Bidet Supply Punchings and Outlet Details
6 Close-Coupled and Wall-Mounted Gravity Type Water
Closet Tanks
Tables
1A Maximum Allowable Defects for Vitreous China Water
Closet Bowls and Tanks
1B Maximum Allowable Defects for Vitreous China Lavatories
and Drinking Fountains
2A Sizes and Passageways for Urinals
2B Minimum Urinal Dimensions
Appendices
A Demonstrating Compliance to ASME A112.19.2M
B Water Pressure Recommendations
C Illustrations
D Government Requirements
This Standard covers physical requirements and test methods pertaining to material, grading, dimensions, certain features of construction and types and sizes of vitreous china plumbing fixtures in general use.
DevelopmentNote |
Supersedes WW P 541/1 (B) and WW P 541/2 (B). (07/2004)
|
DocumentType |
Standard
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Withdrawn
|
SupersededBy |
NFPA 501C : 1996 | RECREATIONAL VEHICLES |
ASME A112.4.3 : 1999 : R2015 | PLASTIC FITTINGS FOR CONNECTING WATER CLOSETS TO THE SANITARY DRAINAGE SYSTEM |
NSF 24 : 2015 | PLUMBING SYSTEM COMPONENTS FOR RECREATIONAL VEHICLES |
ASME A112.4.3 : 1999 : R2004 | PLASTIC FITTINGS FOR CONNECTING WATER CLOSETS TO THE SANITARY DRAINAGE SYSTEM |
ASTM E 2351 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality |
ASTM A 1045 : 2010 | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems |
ASTM E 2351 : 2004 : REV A : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality (Withdrawn 2022) |
ASTM A 1045 : 2010 : R2017 | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems |
ASTM A 1045 : 2010 : R2014 | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems |
ASTM E 2351 : 2004 : REV A | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality |
ASME A112.4.3 : 1999 : R2010 | PLASTIC FITTINGS FOR CONNECTING WATER CLOSETS TO THE SANITARY DRAINAGE SYSTEM |
ASSE 1001 : 2017 | PERFORMANCE REQUIREMENTS FOR ATMOSPHERIC TYPE VACUUM BREAKERS |
ASSE 1002-2015/ ASME A112.1002-2015/ CSA B125.12 : 2015 | ANTI-SIPHON FILL VALVES FOR WATER CLOSET TANKS |
ASSE 1037 : 2015 | PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
ARI 1010 : 2002 | SELF-CONTAINED, MECHANICALLY REFRIGERATED DRINKING-WATER COOLERS |
ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
IAPMO Z124.5 : 2013 E1 | PLASTIC TOILET SEATS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.