ASME B18.18 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
QUALITY ASSURANCE FOR FASTENERS
Hardcopy , PDF
14-03-2022
English
16-06-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Committee Roster
Correspondence With the B18 Committee
1 General Information
2 Basic Plan Requirements
3 Category 1 - Optional Receiving Inspection Plan
for Purchasers
4 Category 2 - Fasteners Intended for General Purpose
Applications
5 Category 3 - Fasteners Intended for Specialized
Applications
6 Category 4 - Automated Assembly Fasteners
This quality-focused standard establishes in-process and final inspection requirements for fastener products as well as a receiving inspection plan for fastener purchasers.
| DevelopmentNote |
Supersedes & incorporates ASME B18.18.1, ASME B18.18.2, ASME B18.18.3M, ASME B18.18.4M, ASME B18.18.5M, ASME B18.18.6M & ASME B18.18.7M. (04/2011)
|
| DocumentType |
Standard
|
| ISBN |
9780791871539
|
| Pages |
22
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| ASME B18.9 : 2012 : R2017 | PLOW BOLTS |
| ASME B18.31.5 : 2011 | BENT BOLTS (INCH SERIES) |
| MIL-DTL-12133 Revision E:2015 | WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR |
| ASTM C 1513 : 2013-04 | SPECIFICATION FOR STEEL TAPPING SCREWS FOR COLD-FORMED STEEL FRAMING CONNECTIONS |
| ASME B18.5 : 2012 : R2017 | ROUND HEAD BOLTS (INCH SERIES) |
| ASME B18.5 : 2012 | ROUND HEAD BOLTS (INCH SERIES) |
| ASME B18.13.1M : 2011 : R2016 | SCREW AND WASHER ASSEMBLIES - SEMS (METRIC SERIES) |
| ASME B18.13.1M : 2011 | SCREW AND WASHER ASSEMBLIES - SEMS (METRIC SERIES) |
| SAE J2484_201212 | Fastener Part Standard - Machine Screws |
| SAE J2655_201509 | Fastener Part Standard - Washers and Lockwashers (Inch Dimensioned) |
| ASTM F 1554 : 2018 : REDLINE | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
| SAE J2656_201611 | Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned |
| ASME B18.15 : 2015 | FORGED EYEBOLTS |
| ASME B18.2.6M : 2012 | METRIC FASTENERS FOR USE IN STRUCTURAL APPLICATIONS |
| SAE J2270_201606 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance |
| ASME B18.2.5M : 2013 | METRIC 12-POINT FLANGE HEAD SCREWS |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| SAE J2485_201212 | Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| ASME B18.31.5 : 2011 : R2016 | BENT BOLTS (INCH SERIES) |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| SAE J2596_201308 | Fastener Part Standard - Tapping Screws and Metallic Drive Screws (Inch Dimensioned) |
| SAE J1237_201709 | Metric Thread Rolling Screws |
| ASME B18.31.2 : 2014 | CONTINUOUS THREAD STUD, DOUBLE-END STUD, AND FLANGE BOLTING STUD (STUD BOLT) (INCH SERIES) |
| SAE J429_201405 | Mechanical and Material Requirements for Externally Threaded Fasteners |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| SAE J995_201707 | Mechanical and Material Requirements for Steel Nuts |
| ASME B18.9 : 2012 | PLOW BOLTS |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| ISO/IEC 17011:2004 | Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASME B18.6.3 : 2013 | MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.