ASME B18.2.4.6M : 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
METRIC HEAVY HEX NUTS
Hardcopy , PDF
23-03-2012
English
01-01-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Committee Roster
Correspondence With the B18 Committee
1 Scope
2 Comparison With ISO Standards
3 Referenced Standards
4 Terminology
5 Dimensions
6 Width Across Flats
7 Thickness
8 Tops and Bearing Surfaces
9 Corner Fill
10 True Position of Hexagon to the Tapped Hole
11 Countersink
12 Threads
13 Material and Mechanical Properties
14 Finish
15 Identification Symbols
16 Inspection and Quality Assurance
17 Designation
18 Workmanship
Nonmandatory Appendix
A - General Dimension Requirements From ISO 4775
Describes the complete general and dimensional data for metric heavy hex nuts M12 through M100 recognized as American National Standard.
| DevelopmentNote |
Supersedes CSA B18.2.4.6 (07/2004) Incorporated into ASME B18.2.6M. (03/2012)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MSS SP 9 : 2013 | SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES |
| AWWA C223 : 2013 | FABRICATED STEEL AND STAINLESS STEEL-TAPPING SLEEVES |
| ASME B31.1 : 2016 | POWER PIPING |
| ASTM A 563M : 2007 | Standard Specification for Carbon and Alloy Steel Nuts [Metric] |
| ASTM A 761/A761M : 2017-02 | SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
| API 623 : 2013 | STEEL GLOBE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ASTM A 563M : 2007 : R2013 | Standard Specification for Carbon and Alloy Steel Nuts (Metric) (Withdrawn 2021) |
| ASTM B 746/B746M : 2016 : REDLINE | Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches |
| AASHTO M 219 : 1992 | SPECIFICATION FOR CORRUGATED ALUMINUM ALLOY STRUCTURAL PLATE FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
| API 600 REDLINE : 2009 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| AASHTO M 180 : 2012 | SPECIFICATION FOR CORRUGATED SHEET STEEL BEAMS FOR HIGHWAY GUARDRAIL |
| MSS SP 42 : 2013 | CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600) |
| API 603 : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
| AASHTO M 167M/M 167 : 2014 | SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
| API 600 RUSSIAN : 2009 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| API 603 RUSSIAN : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
| API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
| AWWA C230 : 2016 | STAINLESS-STEEL FULL-ENCIRCLEMENT REPAIR AND SERVICE CONNECTION CLAMPS FOR 2-IN. THROUGH 12-IN. (50-MM THROUGH 300-MM) PIPE |
| ASTM F 467M : 2006 : REV A : EDT 2 | Standard Specification for Nonferrous Nuts for General Use (Metric) |
| ISO 4775:1984 | Hexagon nuts for high-strength structural bolting with large width across flats Product grade B Property classes 8 and 10 |
| ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
| ASME B18.24 : 2015 | PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD FOR B18 FASTENER PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.