ASME MFC 3M : 2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MEASUREMENT OF FLUID FLOW IN PIPES USING ORIFICE, NOZZLE, AND VENTURI
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
15-12-2022
Superseded by
Published date
01-01-2004
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Committee Roster
Correspondence With the MFC Committee
Part 1 - General
Nonmandatory Appendix
1A - Iterative Computations
1B - Examples of Values of Pipe Wall Uniform
Equivalent Roughness, k
1C - Flow Conditioners and Flow Straighteners
Part 2 - Orifice Plates
Nonmandatory Appendix
2A - Tables of Discharge Coefficients and
Expansibility Factors
Part 3 - Nozzles and Venturi Nozzles
Nonmandatory Appendix
3A - Tables of Discharge Coefficients and
Expansibility Factors
Part 4 - Venturi Meters
Nonmandatory Appendix
4A - Tables of Expansibility Factors
4B - ASME Venturi Meters Used Outside the
Scope of MFC-3M2004
4C - Pressure Loss in ASME Venturi Meters
Describes the geometry and method of use (installation and operating conditions) for pressure differential devices (including, but not limited to, orifice plates, flow nozzles, and venturi tubes) when installed in a closed conduit running full and used to determine the flow-rate of the fluid flowing in the conduit.
| DocumentType |
Standard
|
| ISBN |
791829286
|
| Pages |
144
|
| ProductNote |
NEW CHILD ADD A IS NOW ADDED.
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASHRAE 64 : 2011 | METHODS OF LABORATORY TESTING REMOTE MECHANICAL-DRAFT EVAPORATIVE REFRIGERANT CONDENSERS |
| ASHRAE 84 : 2013 | METHOD OF TESTING AIR-TO-AIR HEAT/ENERGY EXCHANGERS |
| API MPM CH14.10 : 2007 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 14: NATURAL GAS FLUIDS MEASUREMENT - SECTION 10: MEASUREMENT OF FLOW TO FLARES |
| ASHRAE 52.2 : 2017 | METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| SAE AIR 4545 : 2015 | METHOD OF EVALUATING PNEUMATIC GROUND POWER UNITS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| UNE-EN ISO 16890-3:2017 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
| API 551 : 2016 | PROCESS MEASUREMENT |
| EN ISO 16890-3:2016 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
| ASHRAE 41.7 : 2015 | METHODS FOR GAS FLOW MEASUREMENT |
| API MPM CH14.10: 2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 14: NATURAL GAS FLUIDS MEASUREMENT - SECTION 10: MEASUREMENT OF FLOW TO FLARES |
| API TR 1149 : 2015 | PIPELINE VARIABLE UNCERTAINTIES AND THEIR EFFECTS ON LEAK DETECTABILITY |
| API TR 2571 : 2011 | FUEL GAS MEASUREMENT |
| ASHRAE 182 : 2008(R2013) | METHOD OF TESTING ABSORPTION WATER-CHILLING AND WATER-HEATING PACKAGES |
| ASHRAE 41.8 : 2016 | STANDARD METHODS FOR LIQUID FLOW MEASUREMENT |
| ASHRAE 30 : 2017 | METHOD OF TESTING LIQUID CHILLERS |
| ASHRAE 41.10 : 2013 | METHODS FOR REFRIGERANT MASS FLOW MEASUREMENT USING FLOWMETERS |
| EN ISO 29461-1:2013 | Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013) |
| ASME PTC12.1 : 2015 | CLOSED FEEDWATER HEATERS |
| ASHRAE 182 : 2008 | METHOD OF TESTING ABSORPTION WATER-CHILLING AND WATER-HEATING PACKAGES |
| ASTM C 1745/C1745M : 2011 | Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices |
| ASTM D 5737 : 1995 : R2006 | Standard Guide for Methods for Measuring Well Discharge |
| ASTM E 2542 : 2008 : R2014 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
| ASTM C 1814/C1814M : 2016 | Standard Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements |
| ASTM E 1258 : 1988 : R2012 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM E 1258 : 1988 : R2008 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| UNE-EN 779:2013 | Particulate air filters for general ventilation - Determination of the filtration performance |
| ISO 29461-1:2013 | Air intake filter systems for rotary machinery Test methods Part 1: Static filter elements |
| ASTM D 5737 : 1995 : R2000 | Standard Guide for Methods for Measuring Well Discharge |
| DIN EN ISO 16890-3:2015-08 (Draft) | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| ISO 16890-3:2016 | Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| BS EN ISO 29461-1:2013 | Air intake filter systems for rotary machinery. Test methods Static filter elements |
| ASTM E 1258 : 1988 : R1998 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| BS EN 779:2012 | Particulate air filters for general ventilation. Determination of the filtration performance |
| UNE-EN ISO 16890-1:2017 | Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO 16890-1:2016) |
| ISO/TS 21220:2009 | Particulate air filters for general ventilation Determination of filtration performance |
| HI 14.6 : 2016 | ROTODYNAMIC PUMPS FOR HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
| ASTM E 2542 : 2008 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
| DIN EN 779:2012-10 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| BS EN ISO 16890-3:2016 | Air filters for general ventilation Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| DIN EN ISO 29461-1:2014-03 | Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013) |
| DIN EN ISO 16890-3:2017-08 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| ASTM E 1258 : 1988 : R2003 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM D 5737/D5737M : 2014 : REDLINE | Standard Guide for Methods for Measuring Well Discharge |
| DD ISO/TS 21220:2009 | Particulate air filters for general ventilation. Determination of filtration performance |
| BS EN ISO 16890-1:2016 | Air filters for general ventilation Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) |
| ISO 16890-1:2016 | Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) |
| EN ISO 16890-1:2016 | Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO 16890-1:2016) |
| ASME MFC7 : 2016 | MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW VENTURIS AND CRITICAL FLOW NOZZLES |
| ASME PTC6S : 1988 : R2009 | PERFORMANCE TEST CODES - PROCEDURES FOR ROUTINE PERFORMANCE TEST OFSTEAM TURBINES |
| I.S. EN ISO 16890-1:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 1: TECHNICAL SPECIFICATIONS, REQUIREMENTS AND CLASSIFICATION SYSTEM BASED UPON PARTICULATE MATTER EFFICIENCY (EPM) (ISO 16890-1:2016) |
| AHRI 901 (SI) : 2014 | PERFORMANCE RATING OF THERMAL STORAGE EQUIPMENT USED FOR COOLING |
| AHRI 900 : 2004 | PERFORMANCE RATING OF THERMAL STORAGE EQUIPMENT USED FOR COOLING |
| I.S. EN 779:2012 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| PIP PCEFL001 : 2017 | FLOW MEASUREMENT GUIDELINES |
| DIN EN 799 E : 2003 | BAR CODING - SYMBOLOGY SPECIFICATIONS "CODE 128" |
| ASME PTC19.1 : 2013 | TEST UNCERTAINTY |
| ASME PTC 47.1:2017 | CRYOGENIC AIR SEPARATION UNIT OF AN INTEGRATED GASIFICATION COMBINED CYCLE POWER PLANT |
| AHRI 900 (IP) : 2014 | PERFORMANCE RATING OF THERMAL STORAGE EQUIPMENT USED FOR COOLING |
| AHRI 550/590 (I-P) : 2011 | PERFORMANCE RATING OF WATER-CHILLING AND HEAT PUMP WATER-HEATING PACKAGES USING THE VAPOR COMPRESSION CYCLE |
| ASME MFC 26 : 2011(R2018) | MEASUREMENT OF GAS FLOW BY BELLMOUTH INLET FLOWMETERS |
| I.S. EN ISO 16890-3:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| ASME PTC6S : 1988 : R2014 | PERFORMANCE TEST CODES - PROCEDURES FOR ROUTINE PERFORMANCE TEST OFSTEAM TURBINES |
| AHRI 551/591 (SI) : 2011 | PERFORMANCE RATING OF WATER-CHILLING AND HEAT PUMP WATER-HEATING PACKAGES USING THE VAPOR COMPRESSION CYCLE |
| DIN EN ISO 16890-1:2017-08 | AIR FILTERS FOR GENERAL VENTILATION - PART 1: TECHNICAL SPECIFICATIONS, REQUIREMENTS AND CLASSIFICATION SYSTEM BASED UPON PARTICULATE MATTER EFFICIENCY (EPM) (ISO 16890-1:2016) |
| NASA KSC STD Z 0017 : 2014 | ENGINEERING ANALYSIS, THERMAL/FLUID, STANDARD FOR |
| ASME PTC6S : 1988 : R2003 | PERFORMANCE TEST CODES - PROCEDURES FOR ROUTINE PERFORMANCE TEST OFSTEAM TURBINES |
| I.S. EN ISO 29461-1:2013 | AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS (ISO 29461-1:2013) |
| PIP PCSPS001 : 2015 | PACKAGED EQUIPMENT INSTRUMENTATION SPECIFICATION |
| ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| ASME B36.10 : 1979 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| ISO 5167:1980 | Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full |
| ISO/TR 5168:1998 | Measurement of fluid flow Evaluation of uncertainties |
| ISO 8316:1987 | Measurement of liquid flow in closed conduits — Method by collection of the liquid in a volumetric tank |
| ISO/TR 3313:1998 | Measurement of fluid flow in closed conduits Guidelines on the effects of flow pulsations on flow-measurement instruments |
| ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| ISO/TR 3313:1992 | Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes |
| ISO 4006:1991 | Measurement of fluid flow in closed conduits — Vocabulary and symbols |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.