ASTM A 1016/A1016M : 2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
Hardcopy , PDF
11-11-2014
English
31-12-2010
Committee |
A 01
|
DocumentType |
Standard
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.
Title of Specification | ASTM Designation |
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes | A 209/A 209M |
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | A 213/A 213M |
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | A 249/A 249M |
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes | A 250/A 250M |
Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | A 268/A 268M |
Seamless and Welded Austenitic Stainless Steel Tubing for General Service | A 269 |
Seamless and Welded Austenitic Stainless Steel Sanitary Tubing | A 270 |
Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | A 334/A 334M |
Seamless and Electric-Welded Low-Alloy Steel Tubes | A 423/A 423M |
Welded Austenitic Stainless Steel Feedwater Heater Tubes | A 688/A 688M |
Austenitic Stainless Steel Tubing for Breeder Reactor Core Components | A 771 |
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service | A 789/A 789M |
Welded Ferritic Stainless Steel Feedwater Heater Tubes | A 803/A 803M |
Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder Reactor Core Components | A 826 |
High-Frequency Induction Welded, Unannealed Austenitic Steel Condenser Tubes | A 851 |
These designations refer to the latest issue of the respective specifications. |
1.2 In the case of conflict between a requirement of a product specification and a requirement of this general requirements specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order shall prevail.
1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each System must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation (SI) of the product specification is specified in the order.
ASTM A 1098/A1098M : 2018 | Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s) |
ASTM A 1047/A1047M : 2005 : R2019 | Standard Test Method for Pneumatic Leak Testing of Tubing |
ASTM A 334/A334M : 2004 : REV A : R2016 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
ASTM A 270/A270M : 2015 : R2019 | Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing |
ASTM C 852/C852M : 2017 | Standard Guide for Design Criteria for Plutonium Gloveboxes |
ASTM A 498/A498M : 2017 | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins |
ASTM A 789/A789M : 2020 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
ASTM A 312/A312M : 2019 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
ASTM B 676 : 2019 | Standard Specification for UNS N08367 Welded Tube |
ASTM A 511/A511M : 2020 | Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar |
ASTM A 213/A213M : 2019 : REV A | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 269/A269M : 2015 : REV A : R2019 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
ASTM A 803/A803M : 2016 | Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes |
ASTM A 1119 : 2020 | Standard Specification for Welded Partially Corrugated Tube for Potable Water and General Service |
ASTM A 209/A209M : 2003 : R2017 | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
ASTM A 268/A268M : 2020 | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
ASTM A 1012 : 2010 : R2015 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins |
ASTM A 1053/A1053M : 2012 : R2017 | Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe |
ASTM A 688/A688M : 2018 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes |
ASTM A 908 : 2003 : R2019 | Standard Specification for Stainless Steel Needle Tubing |
ASTM A 249/A249M : 2018 : REV A | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
ASTM A 632 : 2019 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.