ASTM A 108 : 2024
Current
The latest, up-to-date edition.
Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
Hardcopy , PDF
English
13-03-2024
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
A 01
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers cold-finished carbon and alloy steel bars produced in straight length and coil. Cold-finished bars are suitable for heat treatment, for machining into components, or for use in the as-finished condition as shafting, or in constructional applications, or for other similar purposes (Note 1). Grades of steel are identified by grade numbers or by chemical composition.
Note 1:A guide for the selection of steel bars is contained in Practice A400.
1.2Some end uses may require one or more of the available designations shown under Supplementary Requirements. Supplementary requirements shall apply only when specified individually by the purchaser.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 665 : 2023 | Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water |
| ASTM D 7577 : 2012 : R2021 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
| ASTM F 2080 : 2023 | Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe |
| ASTM F 2215 : 2015 | Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications (Withdrawn 2024) |
| ASTM D 950 : 2003 : R2020 : EDT 1 | Standard Test Method for Impact Strength of Adhesive Bonds |
| ASTM D 3603 : 2020 | Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
| ASTM A 311/A311M : 2004 : R2020 | Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements |
| ASTM F 670 : 2002 : R2022 | Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing |
| ASTM D 7548 : 2022 | Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products |
| ASTM A 434/A434M : 2018 | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered |
| ASTM D 5534 : 1994 : R2018 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
| ASTM D 4562 : 2001 : R2019 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM A 400 : 2023 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
| ASTM A 29/A29M : 2023 | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM A 304 : 2020 | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements |
| ASTM F 721 : 2018 : R2022 | Standard Specification for Gauge Piping Assemblies |
| ASTM F 1387 : 2023 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASTM F 1511 : 2018 : R2023 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM A 370 : 2024 : REV A | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 510/A510M : 2020 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel |
| ASTM A 322 : 2024 | Standard Specification for Steel Bars, Alloy, Standard Grades |
| ASTM A 322 : 2013 : R2018 : EDT 1 | Standard Specification for Steel Bars, Alloy, Standard Grades |
| ASTM A 370 : 2023 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 510/A510M : 2024 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel |
| ASTM A 370 : 2024 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.