![header thumbnail](/images/publishers\astm_cover.gif)
ASTM A 36/A36M : 2019
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for Carbon Structural Steel
Hardcopy , PDF
English
04-07-2019
This specification2covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes.
Committee |
A 01
|
DocumentType |
Standard
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification2 covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes.
1.2Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order.
1.3When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.
1.4The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements.
1.5For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply.
1.6The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 986 : 1986 : R2022 | Standard Specification for Suction Strainer Boxes |
ASTM A 998/A998M : 2018 | Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications |
ASTM A 134/A134M : 2019 | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) |
ASTM F 1695 : 2020 | Standard Test Method for Performance of Underfired Broilers |
ASTM C 507M : 2022 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM A 1044/A1044M : 2022 : REV A | Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete |
ASTM A 690/A690M : 2013 : REV A : R2018 | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments |
ASTM F 1018 : 2022 | Standard Specification for Steel Emergency Gear Stowage Locker |
ASTM D 8507 : 2023 | Standard Specification for High Load Multi-Rotational Disc Bearings for Bridges and Structures |
ASTM D 5499 : 1994 : R2021 | Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
ASTM F 1047 : 2017 : R2023 | Standard Specification for Frying and Braising Pans, Tilting Type |
ASTM F 1068 : 1990 : R2018 | Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use |
ASTM F 1071 : 1994 : R2018 | Standard Specification for Expanded-Metal Bulkhead Panels |
ASTM C 1802 : 2023 | Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures |
ASTM D 4014 : 2003 : R2018 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
ASTM F 1143 : 2019 | Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight |
ASTM D 7055 : 2019 | Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
ASTM D 5367 : 2016 : R2021 | Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
ASTM A 1075 : 2012 : R2022 | Standard Specification for Flanged Steel U-Channel Posts |
ASTM F 1144 : 2019 | Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged |
ASTM C 1846/C1846M : 2019 | Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM G 92 : 2020 | Standard Practice for Characterization of Atmospheric Test Sites |
ASTM E 2513 : 2007 : R2019 : EDT 1 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
ASTM E 2256 : 2019 | Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service |
ASTM C 506M : 2022 : REV A | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM F 1217 : 2017 : R2023 | Standard Specification for Cooker, Steam |
ASTM C 1146 : 2009 : R2018 | Standard Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air |
ASTM A 1113/A1113M : 2020 : EDT 1 | Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
ASTM F 1069 : 2019 | Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use |
ASTM F 1233 : 2021 | Standard Test Method for Security Glazing Materials And Systems |
ASTM A 1097/A1097M : 2022 | Standard Specification for Steel Casing Pipe, Carbon, Electric-Fusion (Arc)-Welded (NPS 10 and Larger) |
ASTM C 1572/C1572M : 2018 | Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities |
ASTM A 786/A786M : 2015 : R2021 | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
ASTM C 655M : 2019 : REV A | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM F 3561 : 2022 | Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack |
ASTM F 1142 : 2019 | Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight |
ASTM F 1386 : 1992 : R2021 | Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding |
ASTM A 709/A709M : 2021 | Standard Specification for Structural Steel for Bridges |
ASTM F 1073 : 2019 | Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use |
ASTM C 76M : 2022 : REV A | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM F 1196 : 2019 | Standard Specification for Sliding Watertight Door Assemblies |
ASTM F 2141 : 2007 : R2019 | Standard Test Method for Performance of Self-Serve Hot Deli Cases |
ASTM C 507 : 2022 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe |
ASTM D 5977 : 2023 | Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures |
ASTM C 361 : 2022 | Standard Specification for Reinforced Concrete Low-Head Pressure Pipe |
ASTM G 210 : 2013 : R2018 | Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus |
ASTM D 5973 : 1997 : R2017 | Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing |
ASTM F 765 : 1993 : R2022 | Standard Specification for Wildcats, Ship Anchor Chain |
ASTM F 1074 : 1987 : R2018 | Standard Specification for Cleats, Welded Horn Type |
ASTM F 1072 : 1994 : R2018 | Standard Specification for Expanded-Metal Doors |
ASTM D 8101/D8101M : 2018 | Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile |
ASTM C 935 : 2019 | Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast |
ASTM C 506 : 2022 : REV A | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe |
ASTM D 5139 : 2019 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
ASTM F 1019M : 2000 : R2018 | Standard Specification for Steel Deck Gear Stowage Box [Metric] |
ASTM D 1014 : 2018 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
ASTM C 655 : 2019 : REV A | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe |
ASTM A 572/A572M : 2021 : EDT 1 | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
ASTM D 2485 : 2022 | Standard Test Methods for Evaluating Coatings For High Temperature Service |
ASTM F 1602 : 2012 : R2023 | Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated |
ASTM C 76 : 2022 : REV A | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM A 761/A761M : 2018 | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
ASTM D 6297 : 2020 | Standard Specification for Asphaltic Plug Joints for Bridges |
ASTM B 864/B864M : 2019 | Standard Specification for Corrugated Aluminum Box Culverts |
ASTM C 361M : 2022 | Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric) |
ASTM F 998 : 2012 : R2022 | Standard Specification for Centrifugal Pump, Shipboard Use |
ASTM A 950/A950M : 2011 : R2023 | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
ASTM F 1495 : 2020 | Standard Specification for Combination Oven Electric or Gas Fired |
ASTM F 670 : 2002 : R2022 | Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing |
ASTM F 1385 : 2007 : R2018 | Standard Practice for Platforms in Cargo Tanks |
ASTM D 6137 : 1997 : R2018 | Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
ASTM F 1521 : 2022 | Standard Test Methods for Performance of Range Tops |
ASTM F 1182 : 2007 : R2023 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
ASTM E 2950 : 2014 : R2020 | Standard Specification for Metal Canopy Systems |
ASTM F 993 : 2021 | Standard Specification for Valve Locking Devices |
ASTM F 2237 : 2003 : R2020 | Standard Test Method for Performance of Upright Overfired Broilers |
ASTM A 964/A964M : 2023 | Standard Specification for Corrugated Steel Box Culverts |
ASTM F 1510 : 2021 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
ASTM F 1311 : 1990 : R2023 | Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges |
ASTM F 2891 : 2015 : R2020 : EDT 1 | Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated |
ASTM F 1070 : 2019 | Standard Specification for Doors, Non-Tight, for Marine Use |
ASTM D 3966/D3966M : 2022 | Standard Test Methods for Deep Foundation Elements Under Static Lateral Load |
ASTM F 1333 : 1991 : R2019 | Standard Specification for Construction of Fire and Foam Station Cabinets |
ASTM F 1965 : 2017 : R2022 | Standard Test Method for Performance of Deck Ovens |
ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
ASTM D 7230 : 2006 : R2021 | Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates |
ASTM F 1106 : 1987 : R2018 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
ASTM A 1123/A1123M : 2022 | Standard Specification for Carbon Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP), Built-Up, Square, Rectangular, and Special Shape Tube |
NIST GCR 22-917-51:2022 | Research Plan for the Study of Pre-Northridge Earthquake PJP-welded Column Splices and Weak Panel Zones |
PIP STS05130:2018 | Structural and Miscellaneous Steel Erection Specification |
ASTM A 668/A668M : 2021 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
ASTM A 1018/A1018M : 2023 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
ASTM A 6/A6M : 2022 | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
ASTM A 307 : 2014 : EDT 1 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
ASTM A 668/A668M : 1996 : EDT 1 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
ASTM A 1018/A1018M : 2023 : REV A | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
ASTM F 1554 : 2007 : REV A : EDT 1 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM A 668/A668M : 1996 : R2001 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
ASTM F 1554 : 1999 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM A 6/A6M : 2019 | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
ASTM F 1554 : 2017 : EDT 1 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM A 668/A668M : 2021 : REV A | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
ASTM A 6/A6M : 2024 : REV A | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
ASTM A 6/A6M : 2024 | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
ASTM F 1554 : 2007 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM A 6/A6M : 2023 | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
ASTM F 1554 : 2015 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM F 568M : 1998 | Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners |
ASTM A 502 : 2003 : R2015 | Standard Specification for Rivets, Steel, Structural |
ASTM F 1554 : 2015 : EDT 2 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM F 3125/F3125M : 2022 | Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
ASTM A 1011/A1011M : 2018 : REV A | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
ASTM F 1554 : 2007 : REV A | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM A 6/A6M : 2021 | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
ASTM A 563M : 2007 : R2013 | Standard Specification for Carbon and Alloy Steel Nuts (Metric) (Withdrawn 2021) |
ASTM A 563 : 2015 | Standard Specification for Carbon and Alloy Steel Nuts |
ASTM A 668/A668M : 2022 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
ASTM F 1554 : 2017 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM A 502 : 2024 | Standard Specification for Rivets, Steel, Structural |
ASTM F 3125/F3125M : 2019 : EDT 2 | Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
ASTM A 1018/A1018M : 2018 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
ASTM A 1011/A1011M : 2023 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
ASTM F 3125/F3125M : 2023 | Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
ASTM F 1554 : 2018 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM F 1554 : 2004 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM F 1554 : 2015 : EDT 1 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
ASTM A 668/A668M : 2020 : REV A | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
ASTM A 307 : 2021 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
ASTM F 3125/F3125M : 2021 | Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
ASTM A 668/A668M : 2023 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.