ASTM A 554 : 2016 : REDLINE

Name: ASTM A 554 : 2016 : REDLINE - Standard Specification for Welded Stainless Steel Mechanical Tubing
Brand: American Society for Testing and Materials

Superseded

Standard Specification for Welded Stainless Steel Mechanical Tubing

Available format(s)

PDF

Language(s)

English

Published date

01-03-2016

Publisher

American Society for Testing and Materials

Superseded date

18-03-2021

Superseded by

ASTM A 554 : 2021 : REDLINE

€64.07

Excluding VAT

CONTAINED IN VOL. 01.01, 2017 Defines welded austenitic, ferritic, and austenitic-ferritic duplex stainless steel mechanical tubing intended for use in ornamental, structural, exhaust, and other applications where appearance, mechanical properties, or corrosion resistance is needed.

Committee	A 01
DevelopmentNote	Supersedes FED STD 48 (02/2004)
DocumentType	Redline
Pages	11
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM A 554 : 2021 : REDLINE
Supersedes	FED-STD-48 Revision B:1970

1.1This specification covers welded austenitic, ferritic, and austenitic-ferritic duplex stainless steel mechanical tubing intended for use in ornamental, structural, exhaust, and other applications where appearance, mechanical properties, or corrosion resistance is needed. The grades covered are listed in Table 1.

(A)Maximum, unless a range or minimum is indicated. Where ellipses (...) appear in this table, there is no minimum and analysis for the element need not be determined or reported.

(B)For small diameter or thin walls, or both, where many drawing passes are required, a carbon content of 0.040 % max is necessary in grades MT-304L and MT-316L. Small outside diameter tubes are defined as those less than 0.500 in. (12.7 mm) in outside diameter and light wall tubes as those less than 0.049 in. (1.24 mm) in average wall thickness.

(C)The columbium content shall be not less than ten times the carbon content and not more than 1.00 %.

(D)The titanium content shall be not less than five times the carbon content and not more than 0.60 %.

(E)S40900 (Type 409) has been replaced by S40910, S40920, and S40930. Unless otherwise specified in the ordering information, an order specifying S40900 or Type 409, shall be satisfied by any one of S40910, S40920, or S40930 at the option of the seller. Material meeting the requirements of S40910, S40920, or S40930 may, by agreement between purchaser and manufacturer, be certified as S40900.

(F)S41003 chemical composition relates to Type 412, which is not currently an AISI or SAE number.

(G)S44100 chemical composition relates to Type 441, which is not currently an AISI or SAE number.

(H)% Cr + 3.3 × %Mo + 16 × %N = 41 min.

(I)% Cr + 3.3 × %Mo + 16 × %N = 40 min.

(J)Designation established in accordance with Practice E527 and SAE J 1086.

(K)Common name, not a trademark, widely used, not associated with any one producer.

1.2This specification covers as-welded or cold-reduced mechanical tubing in sizes to 16 in. (406.4 mm) outside dimension, and in wall thicknesses 0.020 in. (0.51 mm) and over.

1.3Tubes shall be furnished in one of the following shapes as specified by the purchaser: round, square, rectangular, or special.

1.4Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order.

1.5The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

DEFSTAN 02-348/2(2008) : 2008	GUIDE TO THE DESIGN, CORROSION ASSESSMENT AND STRESS ANALYSIS OF STEAM SYSTEMS PIPEWORK
SAE J2551/3_201302	Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
NASA SSTD 8070 0035 : 2013	ASME PROCEDURE FOR WELDING MONEL ALLOY TO STAINLESS STEEL
SAE J2551/2_201302	Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements
NASA SSTD 8070 0122 : 2014	PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL
NASA SSTD 8070 0038 : 2013	ASME PROCEDURE FOR WELDING NITRONIC 40 STAINLESS STEEL ALLOY TO AUSTENITIC STAINLESS STEEL
DOD HDBK 270 : 0	METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
MIL-HDBK-270 Revision A:1991	Metallic Materials, Magnetic Permeability and Electrical Conductivity, Characteristics of (Metric)
A-A-50189 Revision A:1993	Dispenser, Ice, Self-Leveling, Mobile (No S/S Document)
SAE J2551_201309	Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications
SAE J2551/1_201302	Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication
ASTM F 1022 : 2006	Standard Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type (Withdrawn 2012)
ASME STS 1 : 2011	Steel Stacks (STS-1 - 2011)

SAE J1086_201210	Numbering Metals and Alloys
MIL-STD-129 Revision R:2014	Military Marking for Shipment and Storage
FED-STD-123 Revision H:2007	Marking for Shipment (Civil Agencies)
ASTM E 527 : 2016 : REDLINE	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
MIL-STD-163 Revision C:1978	Steel Mill Products Preparation for Shipment and Storage (S/S by ASTM-A700)

Summarise

ChatGPT Perplexity

€64.07

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Shopping Cart

ASTM A 554 : 2016 : REDLINE

Standard Specification for Welded Stainless Steel Mechanical Tubing

Abstract

General Product Information

Scope

Standards Referenced By This Book

Standards Referencing This Book

Industry

Sub-Industry