• Shopping Cart
    There are no items in your cart

ASTM A 574 : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Alloy Steel Socket-Head Cap Screws

Available format(s)

Hardcopy , PDF

Superseded date

23-11-2023

Superseded by

ASTM A 574 : 2021

Language(s)

English

Published date

15-06-2017

€67.30
Excluding VAT

This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required.

Committee
F 16
DocumentType
Standard
Pages
7
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required.

1.2The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.3The following hazard caveat pertains only to the test method portions, sections 5.1, 5.6, 8, and 12, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM F 1624 : 2012 : R2018 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM F 2798 : 2009 : R2018 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ASTM F 1233 : 2021 Standard Test Method for Security Glazing Materials And Systems
ASTM F 1510 : 2021 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASTM F 1476 : 2007 : R2019 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 541 : 2012 : R2020 Standard Specification for Alloy Steel Eyebolts

ASTM F 1940 : 2007 : REV A : R2014 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM F 1789 : 2014 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2016 Standard Terminology for F16 Mechanical Fasteners
ASTM F 1470 : 2012 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 2328 : 2005 : R2011 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F 1789 : 2017 Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2008 Standard Terminology for F16 Mechanical Fasteners
ASTM F 606/F606M : 2019 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 1789 : 2006 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2001 : REV A Standard Terminology of F16 Mechanical Fasteners
ASTM F 1470 : 2002 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1789 : 2017 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2012 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2001 : REV B Standard Terminology of F16 Mechanical Fasteners
ASTM F 1789 : 2005 : REV C Standard Terminology for F16 Mechanical Fasteners
ASTM F 1470 : 2009 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1789 : 2003 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2008 : REV B Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2006 : REV B Standard Terminology for F16 Mechanical Fasteners
ASTM F 2282 : 2018 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F 1789 : 2014 Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2002 : REV A Standard Terminology of F16 Mechanical Fasteners
ASTM F 1789 : 2009 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2006 : REV C Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2004 : REV B Standard Terminology for F16 Mechanical Fasteners
ASTM F 2282 : 2003 : R2015 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F 1789 : 2007 : REV C Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2007 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2008 : REV C Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2015 Standard Terminology for F16 Mechanical Fasteners
ASTM F 2282 : 2003 : R2009 : EDT 1 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F 1789 : 2002 : REV B Standard Terminology of F16 Mechanical Fasteners
ASTM A 751 : 2021 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM F 1789 : 2010 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2012 Standard Terminology for F16 Mechanical Fasteners
ASTM F 2282 : 2003 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F 1789 : 2005 : REV D Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2017 : REV A : EDT 1 Standard Terminology for F16 Mechanical Fasteners
ASTM F 2328 : 2017 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM F 1940 : 2001 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM F 2328 : 2004 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F 2328 : 2014 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM F 1789 : 2010 : REV B Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2010 : REV A : EDT 1 Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2015 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1940 : 2007 : REV A Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM A 751 : 2020 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM F 1789 : 2000 : REV A Standard Terminology of F16 Mechanical Fasteners
ASTM F 1470 : 2018 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 2328 : 2005 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F 1789 : 2007 : REV B Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2011 : REV B Standard Terminology for F16 Mechanical Fasteners
ASTM F 1470 : 2001 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1789 : 2004 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2005 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1470 : 2019 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1789 : 2008 : REV D Standard Terminology for F16 Mechanical Fasteners
ASTM F 2282 : 2003 : R2009 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM E 112 : 2013 : R2021 Standard Test Methods for Determining Average Grain Size
ASTM E 112 : 2013 Standard Test Methods for Determining Average Grain Size
ASTM F 1789 : 2007 Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2008 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 1940 : 2007 : REV A : R2019 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM F 1789 : 2011 : REV A Standard Terminology for F16 Mechanical Fasteners
ASTM F 2282 : 2015 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F 1940 : 2007 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM F 1789 : 2005 : REV B Standard Terminology for F16 Mechanical Fasteners
ASTM F 606/F606M : 2021 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 1789 : 2002 Standard Terminology of F16 Mechanical Fasteners
ASTM F 1940 : 1999 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.