ASTM A 677 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Specification for Nonoriented Electrical Steel Fully Processed Types
English
08-04-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.07, 2017 Defines the detailed requirements to which flat-rolled nonoriented fully processed electrical steel shall conform.
| Committee |
A 06
|
| DevelopmentNote |
Supersedes ASTM A 677/A677M. (07/2005)
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers the detailed requirements to which flat-rolled nonoriented fully processed electrical steel shall conform.
1.2This steel is produced to specified maximum core-loss values and is intended primarily for commercial power frequency (50 and 60 Hz) applications in magnetic devices. Desirable core-loss and permeability characteristics are developed during mill processing, so additional heat treatment by the user is usually not necessary.
1.3These nonoriented fully processed electrical steels are low-carbon, silicon-iron, or silicon-aluminum-iron alloys containing up to about 3.5 % silicon and a small amount of aluminum.
1.4The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to customary (cgs-emu and inch-pound) units which are provided for information only and are not considered standard.
| ASTM A 971/A971M : 2017 : REDLINE | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils |
| MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| ASTM A 804/A804M : 2004 : R2009 : EDT 1 | Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
| ASTM A 1036 : 2004 : R2009 | Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers |
| ASTM A 720/A720M : 2002 : R2016 : EDT 1 | Standard Test Method for Ductility of Nonoriented Electrical Steel |
| ASTM A 1036 : 2004 | Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers |
| MIL M 17060 : F | MOTORS, 60-HERTZ, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| ASTM A 1086 : 2013 | Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types |
| ASTM A 971 : 2000 | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils |
| ASTM A 664 : 2015 : REDLINE | Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications |
| ASTM A 720/A720M : 2002 : R2007 | Standard Test Method for Ductility of Nonoriented Electrical Steel |
| ASTM A 720/A720M : 2002 | Standard Test Method for Ductility of Nonoriented Electrical Steel |
| ASTM A 804/A804M : 2004 | Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
| MIL-STD-2037 Base Document:1991 | PROCEDURE TO OBTAIN CERTIFICATION FOR ELECTRIC MOTOR SEALED INSULATION SYSTEMS |
| ASTM A 804/A804M : 2004 : R2015 | Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
| ASTM A 720/A720M : 2002 : R2011 | Standard Test Method for Ductility of Nonoriented Electrical Steel |
| ASTM A 1036 : 2004 : R2015 | Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers |
| ASTM A 719/A719M : 2014 : REDLINE | Standard Test Method for Lamination Factor of Magnetic Materials |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ASTM A 664 : 2015 : REDLINE | Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications |
| ASTM A 700 : 2014 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
| ASTM A 717/A717M : 2012 | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens |
| ASTM A 971/A971M : 2017 : REDLINE | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.