ASTM A 744/A744M : 2013 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
10-09-2020
English
15-05-2013
CONTAINED IN VOL. 01.02, 2017 Defines iron-chromium-nickel alloy, stainless steel castings intended for particularly severe corrosive applications.
Committee |
A 01
|
DevelopmentNote |
Supersedes ASTM A 744 (11/2002)
|
DocumentType |
Redline
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This specification covers iron-chromium-nickel alloy, stainless steel castings intended for particularly severe corrosive applications.
1.2This specification requires postweld heat-treatment of all weld repairs affecting surfaces intended to be wetted by the corrosive medium. For applications for which postweld heat-treatment is not considered mandatory for retention of acceptable corrosion resistance, refer to Specification A743/A743M.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
DIN EN ISO 15156-3:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
ASTM A 488/A488M : 2017-05 | PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
AWWA C223 : 2013 | FABRICATED STEEL AND STAINLESS STEEL-TAPPING SLEEVES |
BS EN ISO 10439:2002 | Petroleum, chemical and gas service industries. Centrifugal compressors |
NACE 5A171 : 2007 | MATERIALS FOR STORING AND HANDLING COMMERCIAL GRADES OF AQUEOUS HYDROFLUORIC ACID AND ANHYDROUS HYDROGEN FLUORIDE |
I.S. EN ISO 10439:2002 | PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS |
02/703231 DC : DRAFT FEB 2002 | BS EN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S- CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
EN ISO 15156-3:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
ANSI/HI 9.6.2 : 2015 | ROTODYNAMIC PUMPS FOR ASSESSMENT OF APPLIED NOZZLE LOADS |
API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
ASTM A 781/A781M : 2018-02 | SPECIFICATION FOR CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE |
AWS G2.3M/G2.3 : 2012 | GUIDE FOR THE JOINING OF SOLID SOLUTION AUSTENITIC STAINLESS STEELS |
BS EN ISO 15156-3:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
AWWA C230 : 2016 | STAINLESS-STEEL FULL-ENCIRCLEMENT REPAIR AND SERVICE CONNECTION CLAMPS FOR 2-IN. THROUGH 12-IN. (50-MM THROUGH 300-MM) PIPE |
ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
EN ISO 10439:2002 | Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002) |
NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
I.S. EN ISO 15156-3:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
ASME B73.2 : 2016 | Specification for Vertical In-Line Centrifugal Pumps for Chemical Process |
ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
ASTM A 297/A297M : 2017 : REDLINE | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application |
AWS A5.14 : 1989 | NICKEL AND NICKEL-ALLOY BARE WELDING RODS AND ELECTRODES, SPECIFICATION FOR, |
AWS A5.11 : 1990 | NICKEL AND NICKEL ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC WELDING |
ASTM A 494/A494M : 2017-03 | SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL ALLOY |
ASTM A 732/A732M : 2014 : REDLINE | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.