ASTM A 811 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
Hardcopy , PDF
05-11-2022
English
09-04-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
A 06
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers parts produced from iron powder metallurgy materials.
1.2This specification deals with powder metallurgy parts in the sintered or annealed condition. Should the sintered parts be subjected to any secondary operation that causes mechanical strain, such as machining or sizing, they should be resintered or annealed.
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to customary (cgs-emu and inch-pound) units, which are provided for information only, and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM B 925 : 2015 : R2022 | Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens |
| ASTM A 848 : 2017 | Standard Specification for Low-Carbon Magnetic Iron |
| ASTM A 596/A596M : 2014 | Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens |
| ASTM A 34/A34M : 2006 : R2021 | Standard Practice for Sampling and Procurement Testing of Magnetic Materials |
| ASTM A 596/A596M : 2021 | Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Point by Point (Ballistic) Method and Ring Specimens |
| ASTM A 773/A773M : 2021 | Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs |
| ASTM A 34/A34M : 2006 : R2018 | Standard Practice for Sampling and Procurement Testing of Magnetic Materials |
| ASTM A 340 : 2021 | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing |
| ASTM E 1019 : 2018 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques |
| ASTM E 1019 : 2003 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys |
| ASTM E 1019 : 2008 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques |
| ASTM A 773/A773M : 2014 | Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs |
| ASTM A 340 : 2020 | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing |
| ASTM A 340 : 2022 | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing |
| ASTM E 1019 : 2000 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys |
| ASTM E 1019 : 2002 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys |
| ASTM E 1019 : 2011 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.