ASTM A 834 : 1995 : R2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Common Requirements for Iron Castings for General Industrial Use
Hardcopy , PDF
09-10-2024
English
01-05-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
A 04
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers a group of requirements that are mandatory requirements when used in conjunction with the following iron casting specifications issued by ASTM:
| ASTM Specification2 |
| A47/A47M |
| A48/A48M |
| A197/A197M |
| A220/A220M |
| A278/A278M |
| A319 |
| A395/A395M |
| A436 |
| A439/A439M |
| A518/A518M |
| A532/A532M |
| A536 |
| A571/A571M |
| A823 |
| A842 |
| A874/A874M |
| A897/A897M |
1.2This specification also covers a group of supplementary requirements which may be applied to the above specifications as indicated herein. These are provided for use when additional testing or inspection is desired and apply only when specified individually by the purchaser in the order.
1.3The requirements of the individual material specification, and this general specification, shall prevail in the sequence named.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 1095 : 2015 : R2023 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
| ASTM E 94/E94M : 2017 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM A 532/A532M : 2010 : R2019 | Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM A 48/A48M : 2003 : R2021 | Standard Specification for Gray Iron Castings |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM A 47/A47M : 1999 : R2018 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM A 439/A439M : 2018 | Standard Specification for Austenitic Ductile Iron Castings |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 10 : 2023 | Standard Test Method for Brinell Hardness of Metallic Materials |
| ASTM A 532/A532M : 2010 : R2023 | Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM E 709 : 2015 | Standard Guide for Magnetic Particle Testing |
| ASTM A 536 : 2024 | Standard Specification for Ductile Iron Castings |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM A 874/A874M : 1998 : R2018 : EDT 1 | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| ASTM A 644 : 1998 | Standard Terminology Relating to Iron Castings |
| ASTM E 10 : 2001 | Standard Test Method for Brinell Hardness of Metallic Materials |
| ASTM A 842 : 2011 : REV A : R2018 : EDT 1 | Standard Specification for Compacted Graphite Iron Castings |
| ASTM E 709 : 2021 | Standard Guide for Magnetic Particle Testing |
| ASTM A 439/A439M : 2018 : R2022 | Standard Specification for Austenitic Ductile Iron Castings |
| ASTM E 165/E165M : 2023 | Standard Practice for Liquid Penetrant Testing for General Industry |
| ASTM A 48/A48M : 2022 | Standard Specification for Gray Iron Castings |
| ASTM E 30 : 1989 | Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron (Withdrawn 1995) |
| ASTM A 518/A518M : 1999 : R2018 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM A 197/A197M : 2000 : R2023 : EDT 1 | Standard Specification for Cupola Malleable Iron |
| ASTM A 518/A518M : 1999 : R2022 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM A 536 : 1984 : R2019 : EDT 1 | Standard Specification for Ductile Iron Castings |
| ASTM A 220/A220M : 1999 : R2018 : EDT 1 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 897/A897M : 2022 | Standard Specification for Austempered Ductile Iron Castings |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM A 247 : 2019 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings |
| ASTM A 47/A47M : 1999 : R2022 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM A 395/A395M : 1999 : R2018 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 571/A571M : 2001 : R2019 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM A 197/A197M : 1998 | Standard Specification for Cupola Malleable Iron |
| ASTM E 802 : 2019 | Standard Reference Radiographs for Gray Iron Castings Up to 4<fraction><num>1</num><den>2</den> </fraction> in. (114 mm) in Thickness |
| ASTM A 842 : 2011 : REV A : R2022 : EDT 1 | Standard Specification for Compacted Graphite Iron Castings |
| ASTM E 802 : 2021 | Standard Reference Radiographs for Gray Iron Castings Up to 4<fraction><num>1</num><den>2</den> </fraction> in. (114 mm) in Thickness |
| ASTM A 571/A571M : 2001 : R2023 : EDT 1 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM E 94/E94M : 2022 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM A 802/A802M : 1995 : R1996 | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination |
| ASTM A 874/A874M : 1998 : R2022 | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| ASTM A 197/A197M : 2000 : R2019 | Standard Specification for Cupola Malleable Iron |
| ASTM A 48/A48M : 2003 : R2016 | Standard Specification for Gray Iron Castings |
| ASTM A 897/A897M : 2016 | Standard Specification for Austempered Ductile Iron Castings |
| ASTM A 319 : 1971 : R1995 | Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts |
| ASTM A 247 : 2024 | Standard Test Method for Visual Evaluation of Graphite in Iron Castings |
| ASTM A 823 : 1999 : R2023 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM A 220/A220M : 1999 : R2022 : EDT 1 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 823 : 1999 : R2019 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM E 165/E165M : 2018 | Standard Practice for Liquid Penetrant Testing for General Industry |
| ASTM E 10 : 2018 | Standard Test Method for Brinell Hardness of Metallic Materials |
| ASTM A 395/A395M : 1999 : R2022 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.