![header thumbnail](/images/publishers\astm_cover.gif)
ASTM A 861 : 2004 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for High-Silicon Iron Pipe and Fittings
Hardcopy , PDF
26-05-2023
English
05-10-2017
CONTAINED IN VOL. 01.02, 2018 Defines high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction.
Committee |
A 04
|
DevelopmentNote |
Supersedes MIL P 22561 (C). (08/2004)
|
DocumentType |
Standard
|
Pages |
26
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3Pipe and pipe fittings shall be the no-hub (MJ) or the hub and plain end design.
1.4Pipe and pipe fittings shall be of the sizes specified in Table 1 and Table 2 and Figs. 1-71 or other sizes that shall be permitted to conform to the requirements given herein.
TABLE 1 Tolerances for High-Silicon Iron Hub/Plain-End Pipe
Note 1:1 in. = 25.4 mm.
Size, in. | Wall Thickness, in. | ID Tolerance, in. | OD Tolerance, in. |
2 | ±1/32 | ±1/32 | ±1/32 |
3 | ±1/32 | ±1/32 | ±1/32 |
4 | ±1/32 | ±1/32 | ±1/32 |
6 | ±1/32 | ±1/32 | ±3/64 |
8 | ±1/32 | ±1/8 | ±1/8 |
10 | ±1/8 | ±1/8 | ±1/8 |
12 | ±1/8 | ±1/8 | ±1/8 |
15 | ±1/8 | ±1/8 | ±1/8 |
TABLE 2 Tolerances for High-Silicon Iron Fittings
Note 1:1 in. = 25.4 mm.
Size, in. | ID Tolerance, | OD Tolerance, | Stop Lug Depth |
11/2 | ±1/16 | ±1/16 | ±1/16 |
11/2× 11/2 | ±1/16 | ±1/16 | ±1/16 |
2 | ±1/16 | ±1/16 | ±1/16 |
2 × 11/2 | ±1/16 | ±1/16 | ±1/16 |
2 × 2 | ±1/16 | ±1/16 | ±1/16 |
3 | ±1/16 | ±1/16 | ±1/16 |
3 × 11/2 | ±1/16 | ±1/16 | ±1/16 |
3 × 2 | ±1/16 | ±1/16 | ±1/16 |
3 × 3 | ±1/16 | ±1/16 | ±1/16 |
4 | ±1/16 | ±1/16 | ±1/16 |
4 × 11/2 | ±1/16 | ±1/16 | ±1/16 |
4 × 2 | ±1/16 | ±1/16 | ±1/16 |
4 × 3 | ±1/16 | ±1/16 | ±1/16 |
4 × 4 | ±1/16 | ±1/16 | ±1/16 |
TABLE 3 Chemical Composition
Element | Composition, Weight % | |
Grade 1 | Grade 2 | |
Carbon | 0.65–1.10 | 0.75–1.15 |
Manganese | 1.50 max | 1.50 max |
Silicon | 14.20–14.75 | 14.20–14.75 |
Chromium | 0.50 max | 3.25–5.00 |
Molybdenum | 0.50 max | 0.40-0.60 |
Copper | 0.50 max | 0.50 max |
FIG. 1No-Hub Pipe (MJ)
![No-Hub Pipe (MJ)](http://www.astm.org/HTTP/IMAGES/A0861_977304.png)
Size, in. | J, in. | F, in. | t, in. |
11/2 | 23/16(2.19) | 84 | 5/16 |
2 | 211/16(2.69) | 84 | 5/16 |
3 | 349/64(3.77) | 84 | 5/16 |
4 | 449/64(4.77) | 84 | 5/16 |
Note 1:1 in. = 25.4 mm.
FIG. 2Quarter Bends
![Quarter Bends](http://www.astm.org/HTTP/IMAGES/A0861_740.png)
Size, in. | D, in. | ID, in. | OD, in. | Stop Lug |
11/2 | 41/4 | 11/2 | 23/16(2.19) | 11/32 |
2 | 41/2 | 2 | 25/8(2.62) | 11/32 |
2 × 11/2 | 43/16× 41/2 | 2 × 11/2 | 25/8× 23/16 | 11/32 |
3 | 5 | 3 | 33/4(3.75) | 11/32 |
4 | 51/2 | 4 | 43/4(4.75) | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 3Sixth Bends
![Sixth Bends](http://www.astm.org/HTTP/IMAGES/A0861_741.png)
Size, in. | D, in. | ID, in. | OD, in. | Stop Lug |
11/2 | 3 | 11/2 | 23/16 | 11/32 |
2 | 31/4 | 2 | 25/8 | 11/32 |
3 | 31/2 | 3 | 33/4 | 11/32 |
4 | 33/4 | 4 | 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 4Return Bends
![Return Bends](http://www.astm.org/HTTP/IMAGES/A0861_742.png)
Size, | C, | D, | F, | R, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 4 | 2 | 53/32 | 2 | 11/2 | 23/16 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 5Double-Branch Quarter Bend
![Double-Branch Quarter Bend](http://www.astm.org/HTTP/IMAGES/A0861_743.png)
Size, | D, | E, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 37/8 | 33/4 | 11/2 | 23/16 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 6Eight Bends
![Eight Bends](http://www.astm.org/HTTP/IMAGES/A0861_744.png)
Size, | D, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 21/2 | 11/2 | 23/16 | 11/32 |
2 | 23/4 | 2 | 25/8 | 11/32 |
3 | 3 | 3 | 33/4 | 11/32 |
4 | 31/4 | 4 | 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 7Sixteenth Bends
![Sixteenth Bends](http://www.astm.org/HTTP/IMAGES/A0861_745.png)
Size, | D, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 2 | 11/2 | 23/16 | 11/32 |
2 | 21/8 | 2 | 25/8 | 11/32 |
3 | 21/4 | 3 | 33/4 | 11/32 |
4 | 23/8 | 4 | 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 8Long-Sweep Quarter Bends
![Long-Sweep Quarter Bends](http://www.astm.org/HTTP/IMAGES/A0861_60234.png)
FIG. 9Sanitary Y Branches
![Sanitary Y Branches](http://www.astm.org/HTTP/IMAGES/A0861_747.png)
Size, | D, | F, | G, | ID, | OD, | Stop Lug Depth (P), in. |
1/2× 11/2 | 45/8 | 61/2 | 17/8 | 11/2× 11/2 | 23/16× 23/16 | 11/32 |
2 × 11/2 | 47/8 | 61/2 | 15/8 | 2 × 11/2 | 25/8× 23/16 | 11/32 |
2 × 2 | 45/8 | 63/8 | 2 | 2 × 2 | 25/8× 25/8 | 11/32 |
3 × 11/2 | 55/8 | 61/2 | 11/4 | 3 × 11/2 | 33/4× 23/16 | 11/32 |
3 × 2 | 57/8 | 71/8 | 11/2 | 3 × 2 | 33/4× 25/8 | 11/32 |
3 × 3 | 63/8 | 85/8 | 21/4 | 3 × 3 | 33/4× 33/4 | 11/32 |
4 × 11/2 | 65/8 | 71/2 | 13/8 | 4 × 11/2 | 43/4× 23/16 | 11/32 |
4 × 2 | 65/8 | 71/2 | 13/8 | 4 × 2 | 43/4× 25/8 | 11/32 |
4 × 3 | 71/8 | 83/4 | 13/4 | 4 × 3 | 43/4× 33/4 | 11/32 |
4 × 4 | 75/8 | 101/4 | 25/8 | 4 × 4 | 43/4× 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 10Double-Branch Sanitary Y
![Double-Branch Sanitary Y](http://www.astm.org/HTTP/IMAGES/A0861_748.png)
Size, | D, | F, | G, | ID, | OD, | Stop Lug |
in. | in. | in. | in. | in. | in. | Depth (P), in. |
11/2× 11/2 | 45/8 | 61/2 | 17/8 | 11/2× 11/2 | 23/16× 23/16 | 11/32 |
2 × 11/2 | 47/8 | 61/2 | 15/8 | 2 × 11/2 | 25/8× 23/16 | 11/32 |
2 × 2 | 45/8 | 63/8 | 2 | 2 × 2 | 25/8× 25/8 | 11/32 |
3 × 11/2 | 55/8 | 61/2 | 11/4 | 3 × 11/2 | 33/4× 23/16 | 11/32 |
3 × 2 | 57/8 | 71/8 | 11/2 | 3 × 2 | 33/4× 25/8 | 11/32 |
3 × 3 | 63/8 | 85/8 | 21/4 | 3 × 3 | 33/4× 33/4 | 11/32 |
4 × 2 | 65/8 | 71/2 | 13/8 | 4 × 2 | 43/4× 25/8 | 11/32 |
4 × 3 | 71/8 | 83/4 | 13/4 | 4 × 3 | 43/4× 33/4 | 11/32 |
4 × 4 | 75/8 | 101/4 | 25/8 | 4 × 4 | 43/4× 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 11Sanitary Combination Y and 1/8
Bend
![Sanitary Combination Y and Bend](http://www.astm.org/HTTP/IMAGES/A0861_749.png)
Size, | D, | E, | F, | G, | ID, | OD, | Stop Lug |
11/2× 11/2 | 43/4 | 53/8 | 61/2 | 17/8 | 1/2× 11/2 | 23/16× 23/16 | 11/32 |
2 × 11/2 | 43/4 | 53/4 | 61/2 | 15/8 | 2 × 11/2 | 25/8× 23/16 | 11/32 |
2 × 2 | 5 | 57/8 | 65/8 | 17/8 | 2 × 2 | 25/8× 25/8 | 11/32 |
3 × 11/2 | 4 | 51/4 | 61/2 | 15/8 | 3 × 11/2 | 33/4× 23/16 | 11/32 |
3 × 2 | 5 | 61/4 | 71/8 | 11/2 | 3 × 2 | 33/4 × 25/8 | 11/32 |
3 × 3 | 61/4 | 7 | 81/2 | 21/4 | 3 × 3 | 33/4× 33/4 | 11/32 |
4 × 11/2 | 45/16 | 61/8 | 65/8 | 13/8 | 4 × 11/2 | 43/4× 23/16 | 11/32 |
4 × 2 | 5 | 63/8 | 73/8 | 13/8 | 4 × 2 | 43/4× 25/8 | 11/32 |
4 × 3 | 6 | 71/4 | 83/4 | 13/4 | 4× 3 | 43/4× 33/4 | 11/32 |
4 × 4 | 73/8 | 8 | 101/4 | 25/8 | 4× 4 | 43/4× 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 12Double-Branch Sanitary Combination Y and 1/8Bend
![Double-Branch Sanitary Combination Y and Bend](http://www.astm.org/HTTP/IMAGES/A0861_750.png)
Size, | D, | E, | F, | G, | ID, | OD, | Stop Lug |
11/2× 11/2 | 43/4 | 53/8 | 61/2 | 77/8 | 11/2× 11/2 | 23/16× 23/16 | 11/32 |
2 × 11/2 | 43/4 | 53/4 | 61/2 | 15/8 | 2 × 11/2 | 25/8× 23/16 | 11/32 |
2 × 2 | 5 | 57/8 | 65/8 | 15/8 | 2 × 2 | 25/8× 25/8 | 11/32 |
3 × 11/2 | 41/4 | 51/4 | 61/2 | 15/8 | 3 × 11/2 | 33/4× 23/16 | 11/32 |
3 × 2 | 5 | 61/4 | 71/8 | 11/2 | 3 × 2 | 33/4× 25/8 | 11/32 |
3 × 3 | 61/4 | 7 | 81/2 | 21/4 | 3 × 3 | 33/4× 33/4 | 11/32 |
4 × 2 | 5 | 63/8 | 73/8 | 13/8 | 4 × 2 | 43/4× 25/8 | 11/32 |
4 × 3 | 6 | 71/4 | 83/4 | 13/4 | 4 × 3 | 43/4× 33/4 | 11/32 |
4 × 4 | 73/8 | 8 | 101/4 | 25/8 | 4 × 4 | 43/4× 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 13Sanitary T Branches
![Sanitary T Branches](http://www.astm.org/HTTP/IMAGES/A0861_751.png)
Size, in. | E, in. | F, in. | G, in. | ID, in. | OD, in. | Stop Lug |
11/2× 11/2 | 41/4 | 63/4 | 41/4 | 11/2× 11/2 | 23/16× 23/16 | 11/32 |
2 × 11/2 | 41/2 | 63/4 | 41/4 | 2 × 11/2 | 25/8× 23/16 | 11/32 |
2 × 11/2× 11/2 | 41/2 | 63/4 | 41/4 | 2 × 11/2× 11/2 | 25/8× 23/16× 23/16 | 11/32 |
2 × 2 | 41/2 | 67/8 | 41/2 | 2 × 2 | 2 5/8× 25/8 | 11/32 |
3 × 11/2 | 5 | 63/4 | 41/4 | 3 × 11/2 | 33/4× 23/16 | 11/32 |
3 × 2 | 5 | 71/4 | 41/2 | 3 × 2 | 33/4× 2 5/8 | 11/32 |
3 × 3 | 5 | 83/8 | 5 | 3× 3 | 33/4× 33/4 | 11/32 |
4 × 11/2 | 59/16 | 67/8 | 47/32 | 4× 11/2 | 43/4× 23/16 | 11/32 |
4 × 2 | 51/2 | 71/4 | 41/2 | 4 × 2 | 43/4× 25/8 | 11/32 |
4 × 3 | 51/2 | 81/4 | 5 | 4 × 3 | 43/4× 33/4 | 11/32 |
4 × 4 | 51/2 | 93/8 | 51/2 | 4 × 4 | 43/4× 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 14Double-Branch Sanitary T
![Double-Branch Sanitary T](http://www.astm.org/HTTP/IMAGES/A0861_752.png)
Size, | E, | F, | G, | ID, | OD, | Stop Lug |
11/2× 11/2 | 41/4 | 63/4 | 41/4 | 11/2× 11/2 | 23/16× 23/16 | 11/32 |
2 × 11/2 | 41/2 | 63/4 | 41/4 | 2 × 11/2 | 25/8× 23/16 | 11/32 |
2 × 2 | 41/2 | 67/8 | 41/2 | 2 × 2 | 25/8× 25/8 | 11/32 |
3 × 11/2 | 5 | 63/4 | 41/4 | 3 ×11/2 | 33/4× 23/16 | 11/32 |
3 × 2 | 5 | 71/4 | 41/2 | 3 × 2 | 33/4× 25/8 | 11/32 |
3 × 3 | 5 | 83/8 | 5 | 3 × 3 | 33/4× 33/4 | 11/32 |
4 × 2 | 51/2 | 71/4 | 41/2 | 4 × 2 | 43/8× 25/8 | 11/32 |
4 × 3 | 51/2 | 81/4 | 5 | 4 × 3 | 43/4× 33/4 | 11/32 |
4 × 4 | 51/2 | 93/8 | 51/2 | 4 × 4 | 43/8× 43/8 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 15Sanitary Running Traps
![Sanitary Running Traps](http://www.astm.org/HTTP/IMAGES/A0861_753.png)
Size, | A, | B, | C, | D, | J, | R, | ID, | OD, | Stop Lug |
11/2 | 23/4 | 15/8 | 5 | 10 | 4 | 13/4 | 11/2 | 23/16 | 11/32 |
2 | 31/2 | 115/16 | 51/2 | 11 | 4 | 2 | 2 | 25/8 | 11/32 |
3 | 4 | 25/16 | 61/2 | 13 | 51/2 | 21/2 | 3 | 33/4 | 11/32 |
4 | 41/2 | 3 | 71/2 | 15 | 61/2 | 3 | 4 | 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 16Sanitary P Traps
![Sanitary P Traps](http://www.astm.org/HTTP/IMAGES/A0861_754.png)
Size, | A, | B, | C, | D, | J, | R, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 33/4 | 15/8 | 31/2 | 63/4 | 4 | 13/4 | 11/2 | 23/16 | 11/32 |
2 | 4 | 115/16 | 4 | 71/2 | 4 | 2 | 2 | 25/8 | 11/32 |
3 | 41/2 | 25/16 | 5 | 9 | 51/2 | 21/2 | 3 | 33/4 | 11/32 |
4 | 5 | 3 | 6 | 101/2 | 61/2 | 3 | 4 | 43/4 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 17Swivel Trap P-Style, Short
![Swivel Trap P-Style, Short](http://www.astm.org/HTTP/IMAGES/A0861_755.png)
Size, | C, | D, | E, | F, | G, | H, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 83/4 | 4 | 615/16 | 57/16 | 13/32 | 121/2 | 11/2 | 23/16 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 18Swivel Trap P-Style, Long
![Swivel Trap P-Style, Long](http://www.astm.org/HTTP/IMAGES/A0861_756.png)
Size, | CA, | D, | E, | F, | G, | HA, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 123/4 | 4 | 615/16 | 57/16 | 13/32 | 121/2 | 11/2 | 23/16 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 19Swivel Type-S Style, Long
![Swivel Type-S Style, Long](http://www.astm.org/HTTP/IMAGES/A0861_758.png)
Size, | C, | F, | G, | H, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 6 | 8 | 143/8 | 223/4 | 11/2 | 23/16 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 20Centrifugal Drum Trap P Swivel Type
![Centrifugal Drum Trap P Swivel Type](http://www.astm.org/HTTP/IMAGES/A0861_009469.png)
FIG. 21Centrifugal Drum Trap S Swivel Type
![Centrifugal Drum Trap S Swivel Type](http://www.astm.org/HTTP/IMAGES/A0861_759.png)
Size, | C, | D, | E, | F, | J, | ID, | OD, | Stop Lug Depth (P), in. |
11/2 | 4 | 53/32 | 63/4 | 123/4 | 4 | 11/2 | 11/8 | 11/32 |
11/2 | 4 | 1515/32 | 63/4 | 123/4 | 4 | 11/2 | 11/8 | 11/32 |
2 | 43/4 | 511/16 | 79/16 | 141/4 | 43/4 | 2 | 2 | 11/32 |
Note 1:1 in. = 25.4 mm.
FIG. 22Combination Cleanout and Test Tees
![Combination Cleanout and Test Tees](http://www.astm.org/HTTP/IMAGES/A0861_760.png)
Size, in. | B, | E, | F, | G, |
2 | 27/16 | 33/4 | 67/8 | 37/16 |
3 | 33/8 | 411/16 | 83/8 | 43/16 |
4 | 37/8 | 57/16 | 93/8 | 411/16 |
Note 1:1 in. = 25.4 mm.
FIG. 23Coupling
![Coupling](http://www.astm.org/HTTP/IMAGES/A0861_761.png)
Size, in. | A, in. | B, in. |
11/2 | 33/8 | 27/8 |
2 | 4 | 33/8 |
3 | 47/16 | 43/16 |
4 | 415/16 | 53/16 |
Note 1:1 in. = 25.4 mm.
FIG. 24Pipe Plugs
![Pipe Plugs](http://www.astm.org/HTTP/IMAGES/A0861_762.png)
Size, in. | F, in. |
1/2 | 2 |
2 | 21/2 |
3 | 21/2 |
4 | 21/2 |
Note 1:1 in. = 25.4 mm.
FIG. 25Cleanout Plugs
![Cleanout Plugs](http://www.astm.org/HTTP/IMAGES/A0861_763.png)
Size, in. | A, in. | D, in. | E, in. | F, in. |
11/2 | 23/16 | 21/4 | 15/16 | 39/16 |
2 | 221/32 | 21/4 | 15/16 | 39/16 |
3 | 33/4 | 21/2 | 13/8 | 37/8 |
4 | 43/4 | 23/4 | 17/16 | 43/16 |
Note 1:1 in. = 25.4 mm.
FIG. 26Adapter/Hub to No-Hub
![Adapter/Hub to No-Hub](http://www.astm.org/HTTP/IMAGES/A0861_976067.png)
Size, in. | A, in. | B, in. | E, in. | F, in. |
11/2× 11/2 | 323/32 | 21/4 | 9/16 | 45/8 |
11/2× 2 | 313/16 | 221/32 | 9/16 | 45/8 |
11/2× 3 | 313/16 | 313/16 | 9/16 | 45/8 |
11/2× 4 | 313/16 | 413/16 | 9/16 | 47/8 |
2 × 2 | 45/16 | 223/32 | 5/8 | 51/8 |
2 × 3 | 45/16 | 313/16 | 5/8 | 43/4 |
2 × 4 | 45/16 | 413/16 | 5/8 | 5 |
3 × 3 | 55/16 | 313/16 | 11/16 | 53/8 |
4 × 4 | 69/32 | 47/8 | 11/16 | 59/16 |
Note 1:1 in. = 25.4 mm.
FIG. 27Reducers-Increasers
![Reducers-Increasers](http://www.astm.org/HTTP/IMAGES/A0861_765.png)
Size, in. | B, in. | F, in. |
2 × 11/2 | 11/2 | 8 |
3 × 11/2 | 11/2 | 8 |
3 × 2 | 11/2 | 8 |
4 × 11/2 | 11/2 | 8 |
4 × 2 | 11/2 | 8 |
4 × 3 | 11/2 | 8 |
Note 1:1 in. = 25.4 mm.
FIG. 28Sink Outlet
![Sink Outlet](http://www.astm.org/HTTP/IMAGES/A0861_766.png)
Size, in. | A, in. | B, in. | C, in. | D, in. | E, in. | F, in. |
11/2 | 0 to 2 | 101/4 | 17/8 | 35/16 | 1/4 | 23/16 |
Note 1:1 in. = 25.4 mm.
FIG. 29Sink Overflows
![Sink Overflows](http://www.astm.org/HTTP/IMAGES/A0861_767.png)
A, in.A | B, in.A | C, in. |
4 | 61/8 | 1 |
6 | 81/8 | 1 |
8 | 101/8 | 1 |
Note 1:1 in. = 25.4 mm.
FIG. 30Threaded Adapters
![Threaded Adapters](http://www.astm.org/HTTP/IMAGES/A0861_976068.png)
Type | Size, in. |
AD-7 | 11/2Outlet to 11/2MJ |
AD-8 | 11/2Outlet to 2 MJ |
AD-10 | 2 Outlet to 2 MJ |
Note 1:1 in. = 25.4 mm.
FIG. 31Trap Cleanout Details
![Trap Cleanout Details](http://www.astm.org/HTTP/IMAGES/A0861_977305.png)
Note 1:1 in. = 25.4 mm.
FIG. 32Adapter – No-Hub and Split Flange
![Adapter – No-Hub and Split Flange](http://www.astm.org/HTTP/IMAGES/A0861_770.png)
Size, in. | A, in. | J, in. |
2 | 53/4 | 6 |
3 | 7 | 71/2 |
4 | 8 | 9 |
Note 1:Flange dimensions are 150 lb ANSI standard.
Note 2:1 in. = 25.4 mm.
FIG. 33MJ to Lead Adapter
![MJ to Lead Adapter](http://www.astm.org/HTTP/IMAGES/A0861_771.png)
Type | Size, in. | B, in. | C, in. | D, in. |
AD-11 | 11/2 | 21/4 | 11/2 | 125/32 |
Note 1:1 in. = 25.4 mm.
FIG. 34Floor Drains
![Floor Drains](http://www.astm.org/HTTP/IMAGES/A0861_772.png)
Note 1:1 in. = 25.4 mm.
FIG. 35Hub and Plain End Pipe
![Hub and Plain End Pipe](http://www.astm.org/HTTP/IMAGES/A0861_35382.png)
Size, in. | A, in. | B, in. | C, in. | D, in. | E, in. | F, in. |
2 | 49/16 | 43/16 | 35/16 | 21/32 | 211/16 | 25/8 |
3 | 55/16 | 53/16 | 45/16 | 31/8 | 325/32 | 25/8 |
4 | 63/8 | 63/16 | 55/16 | 41/8 | 425/32 | 25/8 |
6 | 817/32 | 811/32 | 75/16 | 515/16 | 611/16 | 3 |
8 | 111/4 | 103/4 | 95/8 | 81/4 | 9 | 3 |
10 | 141/4 | 133/4 | 121/4 | 10 | 111/4 | 37/8 |
12 | 163/4 | 16 | 141/2 | 12 | 131/4 | 4 |
15 | 201/4 | 193/4 | 173/4 | 15 | 163/4 | 41/8 |
Size, in. | t, in. | Weight, lb | Working | Overall Length |
2 | 5/16 | 0.31 | 7 | 7 ft 25/8in. |
3 | 5/16 | 0.31 | 7 | 7 ft 25/8in. |
4 | 5/16 | 0.31 | 7 | 7 ft 25/8in. |
6 | 13/32 | 0.40 | 7 | 7 ft 3 in. |
8 | 13/32 | 0.40 | 7 | 7 ft 3 in. |
10 | 5/8 | 0.62 | 7 | 7 ft 37/8in. |
12 | 5/8 | 0.62 | 5 | 5 ft 4 in. |
15 | 7/8 | 0.75 | 5 | 5 ft 41/8in. |
Note 1:1 in. = 25.4 mm.
FIG. 36Straight Tees
![Straight Tees](http://www.astm.org/HTTP/IMAGES/A0861_774.png)
Size, in. | Weight, | A, in. | B, in. | C, in. |
2 × 11/2 | 11 | 81/2 | 17/8 | 65/8 |
2 × 2 | 12 | 9 | 2 | 7 |
3 × 2 | 17 | 9 | 21/2 | 613/16 |
3 × 3 | 19 | 10 | 21/2 | 71/2 |
4 × 2 | 20 | 9 | 3 | 7 |
4 × 3 | 221/2 | 10 | 3 | 71/4 |
4 × 4 | 26 | 11 | 3 | 8 |
Note 1:1 in. = 25.4 mm.
FIG. 37Sanitary T Branches
![Sanitary T Branches](http://www.astm.org/HTTP/IMAGES/A0861_775.png)
Size, in. | Weight, lb | A, in. | B, in. | C, in. |
2 × 11/2 | 11 | 81/2 | 31/2 | 63/4 |
2 × 2 | 12 | 9 | 31/2 | 7 |
3 × 11/2 | 16 | 81/2 | 4 | 63/4 |
3 × 2 | 18 | 9 | 4 | 7 |
3 × 3 | 20 | 10 | 4 | 71/2 |
4 × 11/2 | 18 | 81/2 | 41/2 | 63/4 |
4 × 2 | 19 | 9 | 41/2 | 7 |
4 × 3 | 26 | 10 | 41/2 | 71/2 |
4 × 4 | 28 | 11 | 41/2 | 8 |
6 × 2 | 31 | 9 | 51/2 | 7 |
6 × 3 | 33 | 10 | 51/2 | 71/2 |
6 × 4 | 35 | 11 | 51/2 | 8 |
6 × 6 | 50 | 13 | 51/2 | 9 |
8 × 4 | 62 | 105/8 | 61/4 | 8 |
8 × 6 | 65 | 141/2 | 65/8 | 101/2 |
8 × 8 | 113 | 19 | 65/8 | 131/2 |
10 × 6 | 130 | 141/4 | 75/8 | 101/2 |
10 × 10 | 180 | 21 | 73/4 | 141/2 |
12 × 8 | 187 | 19 | 83/4 | 131/2 |
Note 1:1 in. = 25.4 mm.
FIG. 38Sanitary Y Branches
![Sanitary Y Branches](http://www.astm.org/HTTP/IMAGES/A0861_776.png)
Size, in. | Weight, lb | A, in. | B, in. | C, in. |
2 × 11/2 | 11 | 85/8 | 43/8 | 43/8 |
2 × 2 | 12 | 9 | 41/4 | 43/4 |
3 × 11/2 | 16 | 85/8 | 51/16 | 37/8 |
3 × 2 | 17 | 9 | 5 | 43/16 |
3 × 3 | 21 | 101/2 | 51/2 | 5 |
4 × 11/2 | 17 | 91/8 | 513/16 | 37/8 |
4 × 2 | 21 | 9 | 53/4 | 311/16 |
4 × 3 | 26 | 101/2 | 61/4 | 41/2 |
4 × 4 | 30 | 12 | 63/4 | 51/4 |
6 × 2 | 28 | 9 | 71/8 | 211/16 |
6 × 3 | 35 | 101/2 | 75/8 | 31/2 |
6 × 4 | 45 | 121/4 | 81/4 | 41/4 |
6 × 6 | 60 | 143/4 | 91/8 | 53/4 |
8 × 2 | 60 | 167/8 | 9 | 41/2 |
8 × 3 | 63 | 121/8 | 9 | 33/4 |
8 × 4 | 65 | 131/2 | 10 | 41/2 |
8 × 6 | 79 | 161/2 | 11 | 61/16 |
8 × 8 | 117 | 191/2 | 121/4 | 71/4 |
10 × 4 | 160 | 131/2 | 111/2 | 31/2 |
10 × 6 | 165 | 165/8 | 131/2 | 37/8 |
10 × 8 | 170 | 193/4 | 143/8 | 43/8 |
10 × 10 | 180 | 221/2 | 15 | 75/8 |
12 × 4 | 173 | 181/4 | 153/16 | 41/2 |
12 × 6 | 196 | 181/4 | 161/2 | 41/2 |
12 × 8 | 200 | 233/8 | 151/2 | 5 |
12 × 10 | 275 | 27 | 191/2 | 6 |
12 × 12 | 288 | 251/2 | 183/8 | 71/4 |
15 × 15 | 455 | 321/8 | 223/4 | 81/8 |
Note 1:1 in. = 25.4 mm.
FIG. 39Double-Branch Sanitary Tee
![Double-Branch Sanitary Tee](http://www.astm.org/HTTP/IMAGES/A0861_60219.png)
FIG. 40Double-Branch Sanitary Y
![Double-Branch Sanitary Y](http://www.astm.org/HTTP/IMAGES/A0861_778.png)
Size, in. | Weight, lb | A, in. | B, in. | C, in. |
2 × 11/2 | 14 | 85/8 | 43/8 | 43/8 |
2 × 2 | 15 | 9 | 41/4 | 43/4 |
3 × 11/2 | 19 | 85/8 | 51/16 | 37/8 |
3 × 2 | 20 | 9 | 5 | 43/16 |
3 × 3 | 28 | 101/2 | 51/2 | 5 |
4 × 11/2 | 21 | 91/8 | 513/16 | 37/8 |
4 × 2 | 23 | 9 | 53/4 | 311/16 |
4 × 3 | 26 | 101/2 | 61/4 | 41/2 |
4 × 4 | 33 | 12 | 63/4 | 51/4 |
6 × 2 | 31 | 9 | 71/8 | 211/16 |
6 × 3 | 46 | 101/2 | 75/8 | 31/2 |
6 × 4 | 52 | 12 | 81/8 | 41/4 |
6 × 6 | 65 | 143/4 | 91/8 | 53/4 |
8 × 4 | 71 | 131/2 | 10 | 101/2 |
8 × 6 | 86 | 161/2 | 11 | 61/16 |
Note 1:1 in. = 25.4 mm.
FIG. 41Double-Branch Sanitary Combination Y and 1/8Bend (T-Y)
![Double-Branch Sanitary Combination Y and Bend (T-Y)](http://www.astm.org/HTTP/IMAGES/A0861_779.png)
Size, in. | Weight, | A, in. | B and B, | C, in. | E, in. |
2 × 11/2 | 15 | 85/8 | 91/4 | 43/8 | 73/8 |
2 × 2 | 17 | 9 | 101/2 | 43/4 | 81/4 |
3 × 11/2 | 17 | 85/8 | 101/4 | 37/8 | 73/8 |
3 × 2 | 22 | 9 | 111/2 | 43/16 | 83/16 |
3 × 3 | 27 | 101/2 | 13 | 5 | 99/16 |
4 × 11/2 | 24 | 91/8 | 113/4 | 37/8 | 81/8 |
4 × 2 | 24 | 9 | 121/2 | 311/16 | 83/16 |
4 × 3 | 28 | 101/2 | 14 | 41/2 | 99/16 |
4 × 4 | 40 | 12 | 151/2 | 51/4 | 1013/16 |
6 × 3 | 45 | 101/2 | 16 | 31/2 | 99/16 |
6 × 4 | 57 | 12 | 171/2 | 41/4 | 1013/16 |
6 × 6 | 83 | 15 | 201/2 | 53/4 | 137/16 |
Note 1:1 in. = 25.4 mm.
FIG. 42Short-Sweep Quarter Bends
![Short-Sweep Quarter Bends](http://www.astm.org/HTTP/IMAGES/A0861_781.png)
Size, in. | Weight, lb | B, in. | C, in. |
2 | 11 | 51/4 | 8 |
3 | 20 | 6 | 9 |
4 | 25 | 61/2 | 10 |
Note 1:1 in. = 25.4 mm.
FIG. 43Long-Sweep Quarter Bends
![Long-Sweep Quarter Bends](http://www.astm.org/HTTP/IMAGES/A0861_780.png)
Size, | Weight, | B, | C, |
2 | 14 | 81/2 | 12 |
3 | 24 | 9 | 121/2 |
4 | 29 | 91/2 | 13 |
6 | 47 | 101/2 | 14 |
8 | 98 | 111/8 | 15 |
Note 1:1 in. = 25.4 mm.
FIG. 44Sanitary Combination Y and 1/8Bend (T-Y)
![Sanitary Combination Y and Bend (T-Y)](http://www.astm.org/HTTP/IMAGES/A0861_782.png)
Size, | Weight, | A, | B, | C, | E, |
2 × 11/2 | 11 | 85/8 | 45/8 | 43/8 | 73/8 |
2 × 2 | 13 | 9 | 51/4 | 43/4 | 81/4 |
3 × 11/2 | 14 | 85/8 | 51/8 | 37/8 | 73/8 |
3 × 2 | 18 | 9 | 53/4 | 43/16 | 83/16 |
3 × 3 | 24 | 101/2 | 61/2 | 5 | 99/16 |
4 × 11/2 | 17 | 91/8 | 57/8 | 37/8 | 81/8 |
4 × 2 | 21 | 9 | 61/4 | 311/16 | 83/16 |
4 × 3 | 23 | 101/2 | 7 | 41/2 | 99/16 |
4 × 4 | 31 | 12 | 73/4 | 51/4 | 103/16 |
6 × 2 | 33 | 9 | 71/4 | 211/16 | 83/16 |
6 × 3 | 37 | 101/2 | 8 | 31/2 | 99/16 |
6 × 4 | 47 | 12 | 83/4 | 41/4 | 1013/16 |
6 × 6 | 63 | 15 | 101/4 | 53/4 | 137/16 |
10 × 6 | 185 | 163/4 | 121/2 | 47/16 | 43/8 |
10 × 8 | 192 | 213/8 | 151/8 | 61/2 | 181/2 |
Note 1:1 in. = 25.4 mm.
FIG. 45Quarter Bends
![Quarter Bends](http://www.astm.org/HTTP/IMAGES/A0861_783.png)
Size, | Weight, | B, | C, |
2 | 9 | 31/2 | 7 |
3 | 16 | 4 | 71/2 |
4 | 20 | 41/2 | 8 |
6 | 36 | 51/2 | 9 |
8 | 54 | 61/8 | 10 |
10 | 116 | 85/8 | 12 |
12 | 195 | 103/8 | 14 |
Note 1:1 in. = 25.4 mm.
FIG. 46Sixth Bends
![Sixth Bends](http://www.astm.org/HTTP/IMAGES/A0861_784.png)
Size, | Weight, | B, | C, |
2 | 8 | 21/4 | 53/4 |
3 | 11 | 21/2 | 6 |
4 | 15 | 23/16 | 65/16 |
6 | 27 | 33/8 | 67/8 |
8 | 71 | 41/8 | 9 |
Note 1:1 in. = 25.4 mm.
FIG. 47Eighth Bends
![Eighth Bends](http://www.astm.org/HTTP/IMAGES/A0861_785.png)
Size, | Weight, | B, | C, |
2 | 7 | 13/4 | 51/4 |
3 | 13 | 115/16 | 57/16 |
4 | 16 | 23/16 | 511/16 |
6 | 25 | 29/16 | 61/16 |
8 | 46 | 311/16 | 813/16 |
10 | 95 | 41/4 | 91/4 |
12 | 132 | 5 | 95/8 |
Note 1:1 in. = 25.4 mm.
FIG. 48Sixteenth Bends
![Sixteenth Bends](http://www.astm.org/HTTP/IMAGES/A0861_786.png)
Size, | Weight, | B, | C, |
2 | 6 | 11/8 | 45/8 |
3 | 8 | 13/16 | 411/16 |
4 | 11 | 15/16 | 413/16 |
6 | 21 | 11/2 | 5 |
8 | 44 | 21/16 | 71/8 |
10 | 80 | 2 | 67/8 |
Note 1:1 in. = 25.4 mm.
FIG. 49Sanitary Increasers
![Sanitary Increasers](http://www.astm.org/HTTP/IMAGES/A0861_976069.png)
Size, | Weight, | A, |
2 × 3 | 9 | 9 |
2 × 4 | 13 | 9 |
2 × 6 | 17 | 9 |
3 × 4 | 17 | 9 |
3 × 6 | 16 | 9 |
4 × 6 | 17 | 9 |
4 × 8 | 33 | 115/8 |
6 × 8 | 50 | 117/8 |
8 × 10 | 85 | 16 |
Note 1:1 in. = 25.4 mm.
FIG. 50Hub Strainers
![Hub Strainers](http://www.astm.org/HTTP/IMAGES/A0861_788.png)
Size, | Weight, |
2 | 21/2 |
3 | 3 |
4 | 5 |
6 | 10 |
8 | 18 |
Note 1:1 in. = 25.4 mm.
FIG. 51Sanitary Reducers
![Sanitary Reducers](http://www.astm.org/HTTP/IMAGES/A0861_976070.png)
Size, | Weight, | A, in. | |
3 × 11/2 | 6 | 5 | |
3 × 2 | 7 | 5 | |
4 × 11/2 | 7 | 5 | |
4 × 2 | 9 | 5 | |
4 × 3 | 11 | 5 | |
6 × 2 | 12 | 5 | |
6 × 3 | 13 | 5 | |
6 × 4 | 14 | 5 | |
8 × 4 | 22 | 6 | |
8 × 6 | 25 | 6 | |
10 × 6 | 39 | 6 | |
10 × 8 | 51 | 6 | |
12 × 6 | 55 | 61/2 | |
12 × 8 | 65 | 6 | |
12 × 10 | 83 | 6 | |
15 × 6 | 79 | 6 | |
15 × 12 | 109 | 6 |
Note 1:1 in. = 25.4 mm.
FIG. 52Double Hubs
![Double Hubs](http://www.astm.org/HTTP/IMAGES/A0861_790.png)
Size, | Weight, | A, |
2 | 61/2 | 1 |
3 | 9 | 1 |
4 | 12 | 1 |
6 | 18 | 1 |
8 | 40 | 2 |
10 | 82 | 2 |
Note 1:1 in. = 25.4 mm.
FIG. 53Pipe Plugs
![Pipe Plugs](http://www.astm.org/HTTP/IMAGES/A0861_791.png)
Size, | Weight, |
2 | 2 |
3 | 3 |
4 | 5 |
6 | 10 |
8 | 17 |
12 | 56 |
Note 1:1 in. = 25.4 mm.
FIG. 54Cleanout Plugs
![Cleanout Plugs](http://www.astm.org/HTTP/IMAGES/A0861_977326.png)
Size, | Weight, |
2 | 31/2 |
3 | 61/2 |
4 | 11 |
6 | 14 |
8 | 26 |
10 | 39 |
Note 1:1 in. = 25.4 mm.
FIG. 55Adapter – Plain End and Split Flange
![Adapter – Plain End and Split Flange](http://www.astm.org/HTTP/IMAGES/A0861_793.png)
Size, | Weight, | A, | J, |
2 | 5 | 53/4 | 6 |
3 | 11 | 7 | 71/2 |
4 | 12 | 8 | 9 |
6 | 22 | 91/2 | 11 |
8 | 44 | 103/4 | 131/2 |
Note 1:1 in. = 25.4 mm.
FIG. 56Adapter – Hub and Split Flange
![Adapter – Hub and Split Flange](http://www.astm.org/HTTP/IMAGES/A0861_794.png)
Size, | Weight, | A, | J, |
2 | 5 | 21/2 | 6 |
3 | 7 | 21/2 | 71/2 |
4 | 12 | 23/4 | 9 |
6 | 16 | 3 | 11 |
8 | 36 | 31/2 | 131/2 |
Note 1:1 in. = 25.4 mm.
FIG. 57Combination Cleanout and Test Tees
![Combination Cleanout and Test Tees](http://www.astm.org/HTTP/IMAGES/A0861_795.png)
Size, | Weight, | A, | B, | C, | D, | E, | F, |
2 | 12 | 21/2 | 9 | 313/16 | 35/8 | 31/16 | 27/8 |
3 | 22 | 27/8 | 10 | 5 | 45/8 | 41/4 | 313/16 |
4 | 29 | 39/16 | 11 | 57/16 | 55/8 | 41/2 | 413/16 |
Note 1:1 in. = 25.4 mm.
FIG. 58Insertable Joints
![Insertable Joints](http://www.astm.org/HTTP/IMAGES/A0861_796.png)
Plate No. | Size, | Weight, | A, | B, |
5045 | 2 | 11 | 73/4 | 61/2 |
5070 | 3 | 17 | 83/8 | 73/8 |
5095 | 4 | 21 | 91/8 | 77/8 |
5144 | 6 | 37 | 91/8 | 77/8 |
Note 1:1 in. = 25.4 mm.
FIG. 59Backwater Valves
![Backwater Valves](http://www.astm.org/HTTP/IMAGES/A0861_797.png)
Size, in. |
3 |
4 |
6 |
8 |
Note 1:1 in. = 25.4 mm.
FIG. 60Sanitary P Traps
![Sanitary P Traps](http://www.astm.org/HTTP/IMAGES/A0861_798.png)
Size, | Without | Hub | A, | B, | C, | D, | E, | G, | H, | Vent, |
2 | 12 | 16 | 11 | 3 | 61/4 | 41/2 | 21/4 | 313/16 | 15/8 | 2 |
3 | 25 | 32 | 121/2 | 41/4 | 61/4 | 51/2 | 3 | 41/2 | 25/16 | 3 |
4 | 37 | 45 | 14 | 51/2 | 7 | 61/2 | 31/4 | 53/16 | 3 | 4 |
6 | 68 | 80 | 17 | 81/2 | 8 | 81/2 | 4 | 61/2 | 315/16 | 4 |
Note 1:Depth of seal on all traps shall be 21/2in.
Note 2:1 in. = 25.4 mm.
FIG. 61Sanitary S Traps
![Sanitary S Traps](http://www.astm.org/HTTP/IMAGES/A0861_799.png)
Size, | Without | Hub | A, | B, | C, | D, | E, | F, | G, | H, | Vent, |
2 | 16 | 18 | 91/4 | 3 | 8 | 41/2 | 33/4 | 43/4 | 313/16 | 15/8 | 2 |
3 | 24 | 29 | 101/2 | 41/4 | 10 | 51/2 | 41/4 | 61/4 | 41/2 | 25/16 | 3 |
4 | 33 | 39 | 111/4 | 51/2 | 12 | 61/2 | 41/4 | 7 | 53/16 | 3 | 4 |
6 | 82 | 89 | 14 | 81/2 | 16 | 81/2 | 5 | 9 | 61/2 | 315/16 | 4 |
Note 1:Depth of seal on all traps shall be 21/2in.
Note 2:1 in. = 25.4 mm.
FIG. 62Sanitary Running Traps
![Sanitary Running Traps](http://www.astm.org/HTTP/IMAGES/A0861_800.png)
Size, | Without | Single | Double | A, | B, | D, | E, | F, | G, | H, | Vent, |
2 | 14 | 17 | 22 | 131/2 | 21/2 | 41/2 | 21/2 | 51/4 | 85/16 | 15/8 | 2 |
3 | 29 | 36 | 42 | 151/2 | 3 | 51/2 | 31/4 | 61/4 | 10 | 25/16 | 3 |
4 | 41 | 49 | 57 | 171/2 | 31/2 | 61/2 | 31/2 | 71/4 | 1111/16 | 3 | 4 |
6 | 78 | 87 | 168 | 211/2 | 41/2 | 81/2 | 41/4 | 81/4 | 15 | 315/16 | 4 |
8 | 162 | 165 | 208 | 267/8 | 51/2 | 11 | 37/8 | 12 | 187/16 | 51/4 | 6 |
10 | 330 | 334 | 346 | 317/8 | 71/8 | 13 | 51/8 | 16 | 221/4 | 611/16 | 6 |
Note 1:Single hub vent is located on the inlet side. Depth of seal on 8- and 10-in. traps is 3 in. All others 21/2in.
Note 2:1 in. = 25.4 mm.
FIG. 63Outside Caulk
![Outside Caulk](http://www.astm.org/HTTP/IMAGES/A0861_801.png)
Plate | Outlet | Weight, lb |
1 | 2, 3, 4 and 6 | 45 |
2 | 2, 3, 4 and 6 | 45 |
3 | 2, 3, 4 and 6 | 53 |
4 | 2, 3, 4 and 6 | 53 |
5 | 2, 3, 4 and 6 | 41 |
6 | 2, 3, 4 and 6 | 42 |
7 | 2, 3, 4 and 6 | 48 |
8 | 2, 3, 4 and 6 | 49 |
Note 1:1 in. = 25.4 mm.
FIG. 64Outside Caulk with Basin
![Outside Caulk with Basin](http://www.astm.org/HTTP/IMAGES/A0861_802.png)
Plate | Size, | A, | B, | C, |
5, 6, 7, 8 | 2 | 27/8 | 31/2 | 5/16 |
3 | 37/8 | 41/2 | 5/16 | |
4 | 47/8 | 51/2 | 3/8 | |
6 | 7 | 73/4 | 3/8 |
Note 1:1 in. = 25.4 mm.
FIG. 65Inside Caulk
![Inside Caulk](http://www.astm.org/HTTP/IMAGES/A0861_803.png)
Note 1:1 in. = 25.4 mm.
FIG. 66Floor Drains
![Floor Drains](http://www.astm.org/HTTP/IMAGES/A0861_804.png)
Plate | Outlet | Weight, lb |
1 | 3 | 70 |
2 | 4 | 73 |
3 | 2 | 37 |
4 | 2 | 45 |
Plate | Size, | A, | B, | C, | D, | E, | F, |
1 | 3 | 8 | 9 | 57/8 | 11/2 | 14 | 141/2 |
Note 1:1 in. = 25.4 mm.
FIG. 67 Method of Installation
![Method of Installation](http://www.astm.org/HTTP/IMAGES/A0861_805.png)
FIG. 68Floor Drain Funnel Attachment
![Floor Drain Funnel Attachment](http://www.astm.org/HTTP/IMAGES/A0861_806.png)
Note 1:1 in. = 25.4 mm.
FIG. 69No. 1, 2, 3, 4, and 5 Overflows
![No. 1, 2, 3, 4, and 5 Overflows](http://www.astm.org/HTTP/IMAGES/A0861_807.png)
Plate | A, in.A | B, in.A | C, in. |
1 | 2 | 41/8 | 1 |
2 | 4 | 61/8 | 1 |
3 | 6 | 81/8 | 1 |
4 | 8 | 101/8 | 1 |
5 | 0 | 21/8 | 1 |
Note 1:1 in. = 25.4 mm.
FIG. 70Sink Outlet
![Sink Outlet](http://www.astm.org/HTTP/IMAGES/A0861_808.png)
Plate | Size, | A, | B, | C, | D, | E, |
1 | 11/2or 2 | 3/4to 11/4 | 10 | 31/2 | 43/8 | 1/8 |
2 | 11/2or 2 | 1 to 2 | 10 | 21/2 | 37/8 | 7/16 |
3 | 11/2or 2 | 1 to 2 | 10 | 21/2 | 3 | 1/4 |
4 | 11/2 | 0 to 2 | 101/4 | 35/16 | 1/4 |
Note 1:Furnished with flat loose strainer plates.
Note 2:1 in. = 25.4 mm.
FIG. 71Detailed Cross Section of Cleanout
![Detailed Cross Section of Cleanout](http://www.astm.org/HTTP/IMAGES/A0861_977307.png)
Size, in. | Diameter | A, in. |
Under 6 | 11/2 | 23/16 |
6 and over | 21/4 | 29/16 |
Note 1:Traps can be supplied without cleanouts, as shown in the figure.
Note 2:1 in. = 25.4 mm.
1.4.1Pipe:
1.4.1.1No-Hub (MJ) (Fig. 1):
Size (in.) | Length (ft) | |
11/2 | 7 | |
2 | 7 | |
3 | 7 | |
4 | 7 |
1.4.1.2Hub/Plain End (Fig.35):
Size (in.) | Length (ft) | |
2 | 7 | |
3 | 7 | |
4 | 7 | |
6 | 7 | |
8 | 7 | |
10 | 5 | |
12 | 5 | |
15 | 5 |
1.4.2Fitting (No-Hub) (MJ):
Figs. | |
Quarter Bends | 2 |
Sixth Bends | 3 |
Return Bends | 4 |
Double-Branch Quarter Bend | 5 |
Eighth Bends | 6 |
Sixteenth Bends | 7 |
Long-Sweep Quarter Bends | 8 |
Sanitary Y Branches | 9 |
Double-Branch Sanitary Y | 10 |
Sanitary Combination Y and 1/8Bend | 11 |
Double-Branch Sanitary Combination Y and 1/8Bend | 12 |
Sanitary T Branches | 13 |
Double Branch Sanitary T | 14 |
Sanitary Running Traps | 15 |
Sanitary P Traps | 16 |
Swivel Trap P-Style, Short | 17 |
Swivel Trap P-Style, Long | 18 |
Swivel Trap S-Style, Long | 19 |
Centrifugal Drum Trap P Swivel Type | 20 |
Centrifugal Drum Trap S Swivel Type | 21 |
Combination Cleanout and Test Tees | 22 |
Coupling | 23 |
Pipe Plugs | 24 |
Cleanout Plugs | 25 |
No-Hub (MJ) Adapter | 26 |
Reducers-Increasers | 27 |
Sink Outlet | 28 |
Sink Overflows | 29 |
Threaded Adapters | 30 |
Trap Cleanout Details | 31 |
No-Hub (MJ) Adapter | 32 |
(MJ) (No-Hub) to Lead Adapter | 33 |
Floor Drains | 34 |
1.4.3Fitting (Hub/Plain End):
Figs. | |
Hub Plain End Pipe | 35 |
Straight Tees | 36 |
Sanitary T Branches | 37 |
Sanitary Y Branches | 38 |
Double-Branch Sanitary Tee | 39 |
Double-Branch Sanitary Y | 40 |
Double-Branch Sanitary Combination Y and 1/8Bend (T-Y) | 41 |
Short-Sweep Quarter Bends | 42 |
Long-Sweep Quarter Bends | 43 |
Sanitary Combination Y and 1/8Bend (T-Y) | 44 |
Quarter Bends | 45 |
Sixth Bends | 46 |
Eighth Bends | 47 |
Sixteenth Bends | 48 |
Sanitary Increasers | 49 |
Hub Strainers | 50 |
Sanitary Reducers | 51 |
Double Hubs | 52 |
Pipe Plugs | 53 |
Cleanout Plugs | 54 |
Adapter – Plain end to Split Flange | 55 |
Adapter – Hub to-Split Flange | 56 |
Combination Cleanout and Test Tees | 57 |
Insertable Joints | 58 |
Backwater Valves | 59 |
Sanitary P Traps | 60 |
Sanitary S Traps | 61 |
Sanitary Running Traps | 62 |
Floor Drains | 63, 64, 65 |
Floor Drains | 66 |
Floor Drains/Installation – Funnel Attachment | 67, 68 |
Overflow | 69 |
Sink Outlet | 70 |
Detailed Cross Section of Cleanout | 71 |
Chemical Composition | Table 3 |
Transverse Bend Test Minimum Requirements | Table S1.1 |
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM A 518/A518M : 1999 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
ASTM A 518/A518M : 1999 : R2018 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
ASTM A 518/A518M : 1999 : R2022 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.