ASTM A 882/A882M : 2020
Current
The latest, up-to-date edition.
Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand
Hardcopy , PDF
English
23-04-2020
Committee |
A 01
|
DocumentType |
Standard
|
Pages |
6
|
ProductNote |
This standard is also refers to FHWA-RD-74-18.
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers seven-wire steel prestressing strand with protective fusion-bonded epoxy powder coating applied by the electrostatic deposition method or other suitable method, with the interstices of the seven wires filled with epoxy to minimize migration of corrosive media, either by capillary action or other hydrostatic forces.
Note 1:The manufacturer as identified throughout this specification is the coating applicator.
1.2A supplementary requirement (S1) is provided for use where bond strength testing of 0.600-in. [15.24-mm] diameter grade 270 [1860] epoxy-coated strand for applications in prestressed ground anchors is required by the purchaser. The supplementary requirement applies only when specified in the purchase order or contract.
1.3Requirements for epoxy powder coatings are contained in Annex A1.
1.4The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables) shall not be considered as requirements of the specification.
1.5This specification is applicable for orders in either inch-pound units (as Specification A882) or SI units [as Specification A882M].
1.6The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the specification.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 432 : 2019 | Standard Specification for Roof and Rock Bolts and Accessories |
ASTM G 14 : 2004 : R2024 | Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) |
ASTM G 14 : 2004 : R2018 | Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) |
ASTM A 981/A981M : 2023 | Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Seven-Wire Steel Strand, Grade 270 [1860], Used in Prestressed Ground Anchors |
ASTM D 7091 : 2022 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
ASTM A 981/A981M : 2011 : R2016 | Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors |
ASTM G 20 : 2010 : R2019 | Standard Test Method for Chemical Resistance of Pipeline Coatings |
ASTM D 7091 : 2020 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
ASTM A 416/A416M : 2024 | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete |
ASTM D 968 : 2022 | Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
ASTM A 416/A416M : 2018 | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete |
ASTM B 117 : 2019 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
ASTM G 20 : 2010 : R2024 | Standard Test Method for Chemical Resistance of Pipeline Coatings |
ASTM D 7091 : 2021 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
ASTM D 968 : 2017 | Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.