ASTM B 1022 : 2022
Current
The latest, up-to-date edition.
Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process
Hardcopy , PDF
English
28-04-2022
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
B 02
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This specification covers commercial zinc-aluminum-magnesium alloys in ingot form for remelting for the coating of steel sheet as specified in Table 1, and referenced in Specifications A875/A875M and A1046/A1046M.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM B 897 : 2023 | Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot |
| ASTM B 949 : 2023 | Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
| ASTM A 902 : 2023 : REV A | Standard Terminology Relating to Metallic Coated Steel Products |
| ASTM B 949 : 2018 | Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
| ASTM A 902 : 2023 | Standard Terminology Relating to Metallic Coated Steel Products |
| ASTM E 527 : 2023 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM E 536 : 2016 | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
| ASTM E 536 : 2023 | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
| ASTM A 875/A875M : 2023 | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
| ASTM E 527 : 2016 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM A 875/A875M : 2022 | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
| ASTM A 1046/A1046M : 2024 | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process |
| ASTM A 1046/A1046M : 2022 | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process |
| ASTM A 1046/A1046M : 2023 | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process |
| ASTM A 875/A875M : 2021 | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
| ASTM A 902 : 2018 : REV A | Standard Terminology Relating to Metallic Coated Steel Products |
| ASTM B 897 : 2018 | Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot |
| ASTM A 1046/A1046M : 2019 | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process |
| ASTM A 902 : 2024 | Standard Terminology Relating to Metallic Coated Steel Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.