Skip to content
Please enter a keyword to search

  • ASTM B 134/B134M : 2015 : REDLINE

    Current The latest, up-to-date edition.

    Standard Specification for Brass Wire

    Available format(s):  PDF

    Language(s):  English

    Published date:  01-05-2015

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 02.01, 2017 Describes requirements for round, hexagonal, octagonal, rectangular and square brass wire of UNS Alloys C21000, C22000, C22600, C23000, C23400, C24000, C26000, C27000 and C27400.

    Scope - (Show below) - (Hide below)

    1.1This specification establishes requirements for round, hexagonal, octagonal, rectangular and square brass wire of UNS Alloy Nos. C21000, C22000, C22600, C23000, C23400, C24000, C26000, C27000, and C27400.

    1.2Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

    General Product Information - (Show below) - (Hide below)

    Committee B 05
    Development Note Supersedes ASTM B 134 (10/2001)
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-DTL-55302-5 Revision F:2008 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-111 Revision B:2006 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-Thru, for Multilayered Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-2 Revision F:2008 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Printed Wiring Boards (.150 Spacing)
    ASTM F 1138 : 1998 : R2007 Standard Specification for Spray Shields for Mechanical Joints
    ASTM F 1138 : 1998 : R2014 Standard Specification for Spray Shields for Mechanical Joints
    MIL-DTL-55302-20 Revision E:2004 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contact, Straight-Thru, for Printed Wiring Boards (.150 Spacing)
    MIL-DTL-55302-8 Revision F:2006 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-1 Revision E:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.150 SPACING)
    A-A-59440-8 Revision B:2012 Cock-Valve, Shut-Off, Screw Stem, Threaded Type, 50 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads
    A-A-59440-3 Revision B:2012 COCK-VALVE, DRAIN, SPRING KEY, BRASS, 50 PSI, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS
    ASTM F 1138 : 1998 : R2003 Standard Specification for Spray Shields for Mechanical Joints
    MIL-DTL-55302-21 Revision F:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACT, RIGHT-ANGLE, 92 COMPOSITE CONTACT, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-6 Revision J:2005 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing)
    ASTM F 1974:2009 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
    ASTM F 1974 : 2009 : R2015 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
    MIL-DTL-55302-7 Revision E:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-4 Revision F:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-2 Revision G:2006 VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR
    MIL-DTL-55302 Revision G:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
    MIL-DTL-1407 Revision D:2009 PIN SET, MARKING, LAUNDRY
    MIL-DTL-55302-19 Revision E:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS RIGHT-ANGLE, 41 COMPOSITE CONTACT, FOR PRINTED WIRING BOARDS (.150 SPACING)
    A-A-59466 Revision C:2011 CLIPS, ELECTRICAL, GENERAL SPECIFICATION FOR
    ASTM B 927/B927M : 2017 : REDLINE Standard Specification for Brass Rod, Bar, and Shapes
    ASTM F 1138 : 1998 Standard Specification for Spray Shields for Mechanical Joints
    MIL-DTL-55302-83 Revision C:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 41, 66, 114 CONTACT POSITIONS: FOR PRINTED WIRING BOARDS (.100 X .050 OFFSET GRID)
    MIL-DTL-55302-84 Revision C:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: CONTACTS - CRIMP, DIP SOLDER TAIL, SOLDER TURRET, AND WIREWRAP
    ASTM B 250/B250M : 2016 : REDLINE Standard Specification for General Requirements for Wrought Copper Alloy Wire
    MIL-DTL-55302-22 Revision F:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM B 250/B250M : 2016 : REDLINE Standard Specification for General Requirements for Wrought Copper Alloy Wire
    ASTM B 846 : 2011-07 TERMINOLOGY FOR COPPER AND COPPER ALLOYS
    ASTM E 8/E8M : 2016-09 TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective