ASTM B 152/B152M : 2024
Current
The latest, up-to-date edition.
Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
Hardcopy , PDF
English
01-07-2024
Committee |
B 05
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification2 covers the requirements for copper sheet, strip, plate, and rolled bar produced from the following coppers.
Copper | Previous | Type of Copper |
C10100 | OFE | Oxygen-free electronic |
C10200 | OF | Oxygen-free without residual |
C10300 | OFXLP | Oxygen-free extra low phosphorus |
C10400, C10500, C10700 | OFS | Oxygen-free, silver bearing |
C10800 | OFLP | Oxygen-free low phosphorus |
C10910 | ... | Low oxygen |
C11000B | ETP, | Electrolytic tough pitch,B Tough pitchB |
C11300, C11400, C11600 | STP | Silver bearing tough pitch |
C12000 | DLP | Phosphorized, low residual phos- |
C12200 | DHP | Phosphorized, high residual phos- |
C12300 | DHPS | Phosphorized, silver bearing |
C14200 | DPA | Phosphorus deoxidized, arsenical |
C14420 | ... | Tin bearing tellurium copper |
C14530 | ... | Tin tellurium bearing copper |
Note 1:Each of the coppers listed has unique properties that can make it suitable for specific applications. The purchaser should consult with the supplier to determine which copper would be best suited for the intended application.
Note 2:This specification is not intended to establish requirements for material rolled to ounce-weight thicknesses. Such material is defined in Specification B370.
Flat copper products with finished (rolled or drawn) edges (flat wire and strip) are defined in Specification B272.
1.1.1When a specific copper is not identified in the contract or purchase order, the supplier may furnish product from any of the listed coppers.
1.2Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other and values from the two systems shall not be combined.
1.3The following safety hazard caveat pertains only to the test method(s) described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B 432 : 2019 | Standard Specification for Copper and Copper Alloy Clad Steel Plate |
ASTM B 813 : 2016 | Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube |
ASTM D 7095 : 2023 | Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip |
ASTM D 849 : 2015 : R2024 | Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons |
ASTM D 1002 : 2010 : R2019 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM F 68 : 2016 | Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices |
ASTM B 248M : 2022 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric) |
ASTM B 694 : 2019 | Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding |
ASTM C 764 : 2019 | Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation |
ASTM C 1936 : 2023 | Standard Test Method for Corrosiveness of Mineral-Fiber or Cellulosic-Fiber Insulation by Comparison to Control |
ASTM D 3528 : 1996 : R2016 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
ASTM F 2798 : 2009 : R2023 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
ASTM B 248 : 2022 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM D 3658 : 2001 : R2016 | Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
ASTM C 739 : 2024 | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation |
ASTM D 3165 : 2007 : R2023 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
ASTM E 18 : 2024 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM C 665 : 2023 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
ASTM B 315 : 2019 | Standard Specification for Seamless Copper Alloy Pipe and Tube |
ASTM B 506 : 2022 | Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction |
ASTM B 753 : 2007 : R2018 | Standard Specification for Thermostat Component Alloys |
ASTM D 3433 : 1999 : R2020 | Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
ASTM E 746 : 2023 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems below 4 MeV |
ASTM B 577 : 2024 | Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper |
ASTM B 846 : 2019 : REV A | Standard Terminology for Copper and Copper Alloys |
ASTM B 577 : 2019 | Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper |
ASTM E 478 : 2024 | Standard Test Methods for Chemical Analysis of Copper Alloys |
ASTM B 846 : 2024 | Standard Terminology for Copper and Copper Alloys |
ASTM B 170 : 2024 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
ASTM B 170 : 1999 : R2020 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
ASTM E 478 : 2008 : R2017 | Standard Test Methods for Chemical Analysis of Copper Alloys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.