ASTM B 174 : 2017 : REDLINE
Current
The latest, up-to-date edition.
Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
English
01-04-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 02.03, 2017 Defines bare bunch-stranded conductors made from round copper wires, either uncoated or coated with tin, lead or lead-alloy for use as electrical conductors.
| Committee |
B 01
|
| DevelopmentNote |
Supersedes ASTM B 158 (01/2002)
|
| DocumentType |
Redline
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This specification covers bare bunch-stranded conductors made from round copper wires, either uncoated or coated with tin, lead, or lead-alloy for use as electrical conductors (Explanatory Note 1 and Explanatory Note 2).
1.2Coated wires shall include only those wires with finished diameters and densities substantially equal to the respective diameters and densities of uncoated wires.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3.1For conductor sizes designated by AWG or kcmil, the requirements in SI units have been numerically converted from corresponding values, stated or derived, in inch-pound units. For conductor sizes designated by SI units only, the requirements are stated or derived in SI units.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| SAE J2394_201712 | Seven Conductor Cable for ABS Power - Truck and Bus |
| IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| CSA C22.2 No. 239 : 2017 | CONTROL AND INSTRUMENTATION CABLES |
| NFPA 79 : 2018 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| IEEE 837-2014 | IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| CSA C68.10 : 2014 | SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV |
| MIL C 915 : F | CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR |
| ASTM B 226 : 2011 | Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors |
| SAE J1494_201203 | Battery Booster Cables |
| ASTM B 8 : 2011 : R2017 | Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
| WC 3-1992 | RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
| ASTM B 226 : 2011 : R2016 | Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors |
| MIL C 24643 : A | CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| MIL-DTL-915 Revision G:2002 | Cable, Electrical, for Shipboard Use, General Specification for |
| SAE J1654_201609 | Unshielded High Voltage Primary Cable |
| C22.2 NO. 188-18 | Splicing wire connectors (Trinational standard with UL 486C and NXM-J- 548-ANCE) |
| CSA C22.2 NO No. 51:14 (R2018) | ARMOURED CABLES |
| ASTM B 8 : 2011 | Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
| C22.2 NO. 75-17 | Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017) |
| DOD HDBK 270 : 0 | METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| SAE J1678_201512 | Low Voltage Ultra Thin Wall Primary Cable |
| QQ-W-343 Revision G:1997 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| SAE J1067_201610 | Seven Conductor Cable - Truck and Bus |
| CSA C22.2 No. 208 : 2014 | FIRE ALARM AND SIGNAL CABLE |
| CSA C22.2 No. 210.2 : 2001 | APPLIANCE WIRING MATERIAL PRODUCTS |
| C22.2 NO. 52-17 | Underground secondary and service-entrance cables |
| UL 83:16ED 2017-07-28 | Standard for Thermoplastic-Insulated Wires and Cables |
| SAE J156_201603 | Fusible Links |
| A-A-59551 Revision A:2009 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| SAE J2840_201708 | High Voltage Shielded and Jacketed Cable |
| MIL-DTL-49285 Revision A:2008 | CABLES, SPECIAL PURPOSE, ELECTRICAL, ALUMINUM FOIL SHIELDED PAIRS, TRIPLETS, OR QUADS, GENERAL SPECIFICATION FOR |
| SAE J2742_201304 | Combination 11 Conductors and 4 Pairs ECBS Cable |
| C22.2 NO. 96.2-18 | Flexible power cables for wind turbine applications rated up to 35 kV |
| CSA C22.2 No. 210 : 2015 | APPLIANCE WIRING MATERIAL PRODUCTS |
| C22.2 NO. 245-17 | Marine shipboard cable |
| CSA C22.2 No. 65 : 2013 | WIRE CONNECTORS |
| ASME NUM 1 : 2009 | RULES FOR CONSTRUCTION OF CRANES, MONORAILS, AND HOISTS (WITH BRIDGE OR TROLLEY OR HOIST OF THE UNDERHUNG TYPE) |
| ASTM B 172 : 2017 : REDLINE | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors |
| ASTM B 193 : 2016 : REDLINE | Standard Test Method for Resistivity of Electrical Conductor Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.