• There are no items in your cart

ASTM B 19 : 2020

Current

Current

The latest, up-to-date edition.

Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-05-2020

€56.53
Excluding VAT

Committee
B 05
DocumentType
Standard
Pages
7
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification establishes the requirements for sheet, strip, plate, bar, and disks for the manufacture of ammunition component parts thereof from alloy UNS C26000.

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard.

1.2.1Exception—Values given in inch-pound units are the standard except for grain size, which is stated in SI units.

1.3The following safety caveat pertains only to the test method described in Section 10 of this specification.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

 (Warning—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location.)

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E 8/E8M : 2024 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 255 : 2023 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM B 858 : 2006 : R2018 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
ASTM B 858 : 2006 : R2024 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM B 846 : 2019 : REV A Standard Terminology for Copper and Copper Alloys
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM B 154 : 2016 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
ASTM E 3 : 2011 : R2017 Standard Guide for Preparation of Metallographic Specimens
ASTM E 478 : 2024 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E 255 : 1991 : R1997 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM B 846 : 2024 Standard Terminology for Copper and Copper Alloys
ASTM E 527 : 2023 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM E 527 : 2016 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM B 900 : 2016 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
ASTM B 248 : 2017 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 900 : 2016 : R2022 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
ASTM E 478 : 2008 : R2017 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E 112 : 2013 : R2021 Standard Test Methods for Determining Average Grain Size
ASTM E 112 : 2013 Standard Test Methods for Determining Average Grain Size
ASTM B 248 : 2022 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 601 : 2024 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
ASTM E 255 : 2007 : R2014 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition (Withdrawn 2023)
ASTM B 601 : 2018 : REV A Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
ASTM E 112 : 2024 Standard Test Methods for Determining Average Grain Size
ASTM B 154 : 2016 : R2022 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.