Skip to content
Please enter a keyword to search

  • ASTM B 209M : 2014 : REDLINE

    Current The latest, up-to-date edition.

    Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    Available format(s):  PDF

    Language(s):  English

    Published date:  01-11-2014

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 02.02, 2014 Defines aluminum and aluminum alloy flat sheet, coiled sheet, and plate in the alloys and tempers.

    Scope - (Show below) - (Hide below)

    1.1This specification covers aluminum and aluminum alloy flat sheet, coiled sheet, and plate in the alloys (Note 1) and tempers shown in Tables 2 and 4, and in the following finishes:

    (A)Limits are in mass percent maximum unless shown as a range or stated otherwise.
    (B)Analysis shall be made for the elements for which limits are shown in this table.
    (C)For purposes of determining conformance to these limits, an observed value or a calculated value attained from analysis shall be rounded to the nearest unit in the last right hand place of figures used in expressing the specified limit, in accordance with the Rounding Method of Practice E29.
    (D)Others includes listed elements for which no specific limit is shown as well as unlisted metallic elements. The producer may analyze samples for trace elements not specified in the specification. However, such analysis is not required and may not cover all metallic Others elements. Should any analysis by the producer or the purchaser establish that an Others element exceeds the limit of Each or that the aggregate of several Others elements exceeds the limit of Total, the material shall be considered non-conforming. The Total for Other Elements does not include elements shown in the footnotes with specific composition limits.
    (E) Other Elements—Total shall be the sum of unspecified metallic elements 0.010 % or more, rounded to the second decimal before determining the sum.
    (F)Vanadium 0.05 max. The total for other elements does not include vanadium.
    (G)The aluminum content shall be calculated by subtracting from 100.00 % the sum of all metallic elements present in amounts of 0.010 % or more each, rounded to the second decimal before determining the sum.
    (H)Composition of cladding alloy as applied during the course of manufacture. Samples from finished sheet or plate shall not be required to conform to these limits.
    (I)Vanadium, 0.05–0.15, zirconium, 0.10–0.25.
    (J)0.05–0.25 Zr.
    (K)Gallium 0.03 max, vanadium 0.05 max.
    (L)0.10–0.6 Mn + Cr.
    (M)In case there is a discrepancy in the values listed in Table 1 with those listed in the “International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys” (known as the “Teal Sheets”), the composition limits registered with the Aluminum Association and published in the “Teal Sheets” shall be considered the controlling composition. The “Teal Sheets” are available at http://www.aluminum.org/tealsheets.
    (A)To determine conformance to this specification, each value for tensile strength and for yield strength shall be rounded to the nearest 1 MPa and each value for elongation to the nearest 0.5 %, both in accordance with the Rounding Method of Practice E29.
    (B)The basis for establishment of mechanical property limits is shown in Annex A1.
    (C)Elongations in 50 mm apply for thicknesses up through 12.50 mm and in 5× diameter for thicknesses over 12.50 mm.
    (D)Materials in either of these tempers, (H32 or H22), (H34 or H24), (H36 or H26), (H38 or H28), (H12 or H22), (H14 or H24), (H16 or H26), (H18 or H28), may be supplied at the option of the supplier, unless one is specifically excluded by the contract or purchase order. When ordered as H2X tempers, the maximum tensile strength and minimum yield strength do not apply. When H2X tempers are supplied instead of ordered H1X or H3X tempers, the supplied H2X temper material shall meet the respective H1X or H3X temper tensile property limits.
    (E)Tests of F temper plate for tensile properties are not required.
    (F)The tension test specimen from plate over 12.50 mm in thickness is machined from the core and does not include the cladding alloy.
    (G)This material is subject to some recrystallization and an attendant loss of brightness.

    Alloy

    Temper

    Specified Thickness,
    mm

    Axis of
    Test Specimen

    Tensile Strength,
    MPa

    Yield Strength
    (0.2 % offset), MPa

    Elongation,C
    min, %

    over

    through

    min

    max

    min

    max

    in 50 mm

    in 5× 
    Diameter

    2124

    T851E

     25.00

     50.00

    longitudinal

    455

    ...

    395

    ...

    ...

    5

    2124

    T851E

    long transverse

    455

    ...

    395

    ...

    ...

    4

    2124

    T851E

    short transverse

    440J

    ...

    380J

    ...

    ...

    1

    2124

    T851E

     50.00

     80.00

    longitudinal

    450

    ...

    395

    ...

    ...

    5

    2124

    T851E

    long transverse

    450

    ...

    395

    ...

    ...

    3

    2124

    T851E

    short transverse

    435

    ...

    380

    ...

    ...

    1

    2124

    T851E

     80.00

    100.00

    longitudinal

    450

    ...

    385

    ...

    ...

    4

    2124

    T851E

    long transverse

    450

    ...

    385

    ...

    ...

    3

    2124

    T851E

    short transverse

    425

    ...

    370

    ...

    ...

    1

    2124

    T851E

    100.00

    130.00

    longitudinal

    440

    ...

    380

    ...

    ...

    4

    2124

    T851E

    long transverse

    440

    ...

    380

    ...

    ...

    3

    2124

    T851E

    short transverse

    420

    ...

    365

    ...

    ...

    1

    2124

    T851E

    130.00

    150.00

    longitudinal

    435

    ...

    370

    ...

    ...

    4

    2124

    T851E

    long transverse

    435

    ...

    370

    ...

    ...

    3

    2124

    T851E

    short transverse

    400

    ...

    350

    ...

    ...

    1

    Alloy

    Temper

    Specified Thickness,
    mm

    Tensile Strength,
    MPa

    Yield Strength
    (0.2 % offset), MPa

    Elongation,C
    min, %

    over

    through

    min

    max

    min

    max

    in 50 mm

    in 5× 
    Diameter

    2219

    O

    0.50

    12.50

    ...

    220

    ...

    110

    12

    ...

    2219

    O

    12.50

    50.00

    ...

    220

    ...

    110

    ...

    10

    2219

    T31K (flat sheet)

    0.50

    1.00

    315

    ...

    200

    ...

     8

    ...

    2219

    T31K (flat sheet)

    1.00

    6.30

    315

    ...

    195

    ...

    10

    ...

    2219

    T351E,H plate
    (formerly T31 plate)

    6.30

    12.50

    315

    ...

    195

    ...

    10

    ...

    2219

    T351E,H plate
    (formerly T31 plate)

    12.50

    50.00

    315

    ...

    195

    ...

    ...

     9

    2219

    T351E,H plate
    (formerly T31 plate)

    50.00

    80.00

    305

    ...

    195

    ...

    ...

     9

    2219

    T351E,H plate
    (formerly T31 plate)

    80.00

    100.00

    290

    ...

    185

    ...

    ...

     8

    2219

    T351E,H plate
    (formerly T31 plate)

    100.00

    130.00

    275

    ...

    180

    ...

    ...

     8

    2219

    T351E,H plate
    (formerly T31 plate)

    130.00

    150.00

    270

    ...

    170

    ...

    ...

     7

    2219

    T37K

    0.50

    1.00

    340

    ...

    260

    ...

     6

    ...

    2219

    T37K

    1.00

    12.50

    340

    ...

    255

    ...

     6

    ...

    2219

    T37K

    12.50

    60.00

    340

    ...

    255

    ...

    ...

     5

    2219

    T37K

    60.00

    80.00

    325

    ...

    250

    ...

    ...

     5

    2219

    T37K

    80.00

    100.00

    310

    ...

    240

    ...

    ...

     4

    2219

    T37K

    100.00

    120.00

    295

    ...

    235

    ...

    ...

     3

    2219

    T62F

    0.50

    1.00

    370

    ...

    250

    ...

     6

    ...

    2219

    T62F

    1.00

    6.30

    370

    ...

    250

    ...

     7

    ...

    2219

    T62F

    6.30

    12.50

    370

    ...

    250

    ...

     8

    ...

    2219

    T62F

    12.50

    25.00

    370

    ...

    250

    ...

    ...

     7

    2219

    T62F

    25.00

    50.00

    370

    ...

    250

    ...

    ...

     6

    2219

    T81 sheet

    0.50

    1.00

    425

    ...

    315

    ...

     6

    ...

    2219

    T81 sheet

    1.00

    6.30

    425

    ...

    315

    ...

     7

    ...

    2219

    T851E
    (formerly T81 plate)

    6.30

    12.50

    425

    ...

    315

    ...

     8

    ...

    2219

    T851E
    (formerly T81 plate)

    12.50

    25.00

    425

    ...

    315

    ...

    ...

     7

    2219

    T851E
    (formerly T81 plate)

    25.00

    50.00

    425

    ...

    315

    ...

    ...

     6

    2219

    T851E
    (formerly T81 plate)

    50.00

    80.00

    425

    ...

    310

    ...

    ...

     5

    2219

    T851E
    (formerly T81 plate)

    80.00

    100.00

    415

    ...

    305

    ...

    ...

     4

    2219

    T851E
    (formerly T81 plate)

    100.00

    130.00

    405

    ...

    295

    ...

    ...

     4

    2219

    T851E
    (formerly T81 plate)

    130.00

    150.00

    395

    ...

    290

    ...

    ...

     3

    2219

    T87

    0.50

    1.00

    440

    ...

    360

    ...

     5

    ...

    2219

    T87

    1.00

    6.30

    440

    ...

    360

    ...

     6

    ...

    2219

    T87

    6.30

    12.50

    440

    ...

    350

    ...

     7

    ...

    2219

    T87

    12.50

    25.00

    440

    ...

    350

    ...

    ...

     6

    2219

    T87

    25.00

    80.00

    440

    ...

    350

    ...

    ...

     5

    2219

    T87

    80.00

    100.00

    425

    ...

    345

    ...

    ...

     3

    2219

    T87

    100.00

    120.00

    420

    ...

    340

    ...

    ...

     2

    2219

    FG

    6.30

    50.00

    ...

    ...

    ...

    ...

    ...

    ...

    Alclad 2219

    O

    0.50

    1.00

    ...

    220

    ...

    110

    12

    ...

    Alclad 2219

    O

    1.00

    2.50

    ...

    220

    ...

    110

    12

    ...

    Alclad 2219

    O

    2.50

    12.50

    ...

    220

    ...

    110

    12

    ...

    Alclad 2219

    O

    12.50

    50.00

    ...

     220H

    ...

     110H

    ...

    10

    Alclad 2219

    T31K (flat sheet)

    1.00

    2.50

    290

    ...

    170

    ...

    10

    ...

    Alclad 2219

    T31K (flat sheet)

    2.50

    6.30

    305

    ...

    180

    ...

    10

    ...

    Alclad 2219

    T351E,K plate
    (formerly T31 plate)

    6.30

    12.50

    305

    ...

    180

    ...

    10

    ...

    Alclad 2219

    T37K

    1.00

    2.50

    310

    ...

    235

    ...

     6

    ...

    Alclad 2219

    T37K

    2.50

    12.50

    325

    ...

    240

    ...

     6

    ...

    Alclad 2219

    T62F

    0.50

    1.00

    305

    ...

    200

    ...

     6

    ...

    Alclad 2219

    T62F

    1.00

    2.50

    340

    ...

    220

    ...

     7

    ...

    Alclad 2219

    T62F

    2.50

    6.30

    350

    ...

    235

    ...

     7

    ...

    Alclad 2219

    T62F

    6.30

    12.50

    350

    ...

    235

    ...

     8

    ...

    Alclad 2219

    T62F

    12.50

    25.00

     370H

    ...

     250H

    ...

    ...

     7

    Alclad 2219

    T62F

    25.00

    50.00

     370H

    ...

     250H

    ...

    ...

     6

    Alclad 2219

    T81 (flat sheet)

    0.50

    1.00

    340

    ...

    255

    ...

     6

    ...

    Alclad 2219

    T81 (flat sheet)

    1.00

    2.50

    380

    ...

    285

    ...

     7

    ...

    Alclad 2219

    T81 (flat sheet)

    2.50

    6.30

    400

    ...

    295

    ...

     7

    ...

    Alclad 2219

    T851E plate
    (formerly T81 plate)

    6.30

    12.50

    400

    ...

    290

    ...

     8

    ...

    Alclad 2219

    T87

    1.00

    2.50

    395

    ...

    315

    ...

     6

    ...

    Alclad 2219

    T87

    2.50

    6.30

    415

    ...

    330

    ...

     6

    ...

    Alclad 2219

    T87

    6.30

    12.50

    415

    ...

    330

    ...

     7

    ...

    Alclad 2219

    FG

    6.30

    50.00

    ...

    ...

    ...

    ...

    ...

    ...

    6013

    T4

    0.50

    6.30

    275

    ...

    145

    ...

    20

    ...

    6013

    T6

    0.50

    6.30

    360

    ...

    315

    ...

    8

    ...

    6013

    T651E

    6.30

    40.00

    365

    ...

    305

    ...

    ...

    4

    6013

    T651E

    40.00

    80.00

    370

    ...

    325

    ...

    ...

    4

    6013

    T651E

    80.00

    160.00

    380

    ...

    325

    ...

    ...

    3

    6061

    O

    0.15

    0.20

    ...

    150

    ...

     85

    10

    ...

    6061

    O

    0.20

    0.25

    ...

    150

    ...

     85

    12

    ...

    6061

    O

    0.25

    0.50

    ...

    150

    ...

     85

    14

    ...

    6061

    O

    0.50

    3.20

    ...

    150

    ...

     85

    16

    ...

    6061

    O

    3.20

    12.50

    ...

    150

    ...

     85

    18

    ...

    6061

    O

    12.50

    25.00

    ...

    150

    ...

    ...

    ...

    16

    6061

    O

    25.00

    80.00

    ...

    150

    ...

    ...

    ...

    14

    6061

    T4

    0.15

    0.20

    205

    ...

    110

    ...

    10

    ...

    6061

    T4

    0.20

    0.25

    205

    ...

    110

    ...

    12

    ...

    6061

    T4

    0.25

    0.50

    205

    ...

    110

    ...

    14

    ...

    6061

    T4

    0.50

    6.30

    205

    ...

    110

    ...

    16

    ...

    6061

    T451E

    6.30

    12.50

    205

    ...

    110

    ...

    18

    ...

    6061

    T451E

    12.50

    25.00

    205

    ...

    110

    ...

    ...

    16

    6061

    T451E

    25.00

    80.00

    205

    ...

    110

    ...

    ...

    14

    6061

    T42F

    0.15

    0.20

    205

    ...

     95

    ...

    10

    ...

    6061

    T42F

    0.20

    0.25

    205

    ...

     95

    ...

    12

    ...

    6061

    T42F

    0.25

    0.50

    205

    ...

     95

    ...

    14

    ...

    6061

    T42F

    0.50

    6.30

    205

    ...

     95

    ...

    16

    ...

    6061

    T42F

    6.30

    12.50

    205

    ...

     95

    ...

    18

    ...

    6061

    T42F

    12.50

    25.00

    205

    ...

     95

    ...

    ...

    16

    6061

    T42F

    25.00

    80.00

    205

    ...

     95

    ...

    ...

    14

    6061

    T6, T62F

    0.15

    0.20

    290

    ...

    240

    ...

     4

    ...

    6061

    T6, T62F

    0.20

    0.25

    290

    ...

    240

    ...

     6

    ...

    6061

    T6, T62F

    0.25

    0.50

    290

    ...

    240

    ...

     8

    ...

    6061

    T6, T62F

    0.50

    6.30

    290

    ...

    240

    ...

    10

    ...

    6061

    T62F, T651E

    6.30

    12.50

    290

    ...

    240

    ...

    10

    ...

    6061

    T62F, T651E

    12.50

    25.00

    290

    ...

    240

    ...

    ...

     8

    6061

    T62F, T651E

    25.00

    50.00

    290

    ...

    240

    ...

    ...

     7

    6061

    T62F, T651E

    50.00

    100.00

    290

    ...

    240

    ...

    ...

     5

    6061

    T62F, T651E

    100.00

     150.00L

    275

    ...

    240

    ...

    ...

     5

    6061

    FG

    6.30

    80.00

    ...

    ...

    ...

    ...

    ...

    ...

    Alclad 6061

    O

    0.24

    0.50

    ...

    140

    ...

     85

    14

    ...

    Alclad 6061

    O

    0.50

    3.20

    ...

    140

    ...

     85

    16

    ...

    Alclad 6061

    O

    3.20

    12.50

    ...

    140

    ...

     85

    18

    ...

    Alclad 6061

    O

    12.50

    25.00

    ...

     150H

    ...

    ...

    ...

    16

    Alclad 6061

    O

    25.00

    80.00

    ...

     150H

    ...

    ...

    ...

    14

    Alclad 6061

    T4

    0.24

    0.50

    185

    ...

     95

    ...

    14

    ...

    Alclad 6061

    T4

    0.50

    6.30

    185

    ...

     95

    ...

    16

    ...

    Alclad 6061

    T451E

    6.30

    12.50

    185

    ...

     95

    ...

    18

    ...

    Alclad 6061

    T451E

    12.50

    25.00

    205H

    ...

     110H

    ...

    ...

    16

    Alclad 6061

    T451E

    25.00

    80.00

    205H

    ...

     110H

    ...

    ...

    14

    Alclad 6061

    T42F

    0.24

    0.50

    185

    ...

     85

    ...

    14

    ...

    Alclad 6061

    T42F

    0.50

    6.30

    185

    ...

     85

    ...

    16

    ...

    Alclad 6061

    T42F

    6.30

    12.50

    185

    ...

     85

    ...

    18

    ...

    Alclad 6061

    T42F

    12.50

    25.00

     205H

    ...

      95H

    ...

    ...

    16

    Alclad 6061

    T42F

    25.00

    80.00

     205H

    ...

      95H

    ...

    ...

    14

    Alclad 6061

    T6, T62F

    0.24

    0.50

    260

    ...

    220

    ...

     8

    ...

    Alclad 6061

    T6, T62F

    0.50

    6.30

    260

    ...

    220

    ...

    10

    ...

    Alclad 6061

    T62F, T651E

    6.30

    12.50

    260

    ...

    220

    ...

    10

    ...

    Alclad 6061

    T62F, T651E

    12.50

    25.00

     290H

    ...

     240H

    ...

    ...

     8

    Alclad 6061

    T62F, T651E

    25.00

    50.00

     290H

    ...

     240H

    ...

    ...

     7

    Alclad 6061

    T62F, T651E

    50.00

    100.00

     290H

    ...

     240H

    ...

    ...

     5

    Alclad 6061

    T62F, T651E

    100.00

    120.00L

     275H

    ...

     240H

    ...

    ...

     5

    Alclad 6061

    FG

    6.30

    80.00

    ...

    ...

    ...

    ...

    ...

    ...

    7075

    O

    0.39

    12.50

    ...

    275

    ...

    145

    10

    ...

    7075

    O

    12.50

    50.00

    ...

    275

    ...

    ...

    ...

     9

    7075

    T6, T62F

    0.19

    0.32

    510

    ...

    435

    ...

     5

    ...

    7075

    T6, T62F

    0.32

    1.00

    525

    ...

    460

    ...

     8

    ...

    7075

    T6, T62F

    1.00

    3.20

    540

    ...

    470

    ...

     9

    ...

    7075

    T6, T62F

    3.20

    4.70

    545

    ...

    475

    ...

     9

    ...

    7075

    T6, T62F

    4.70

    6.30

    550

    ...

    475

    ...

    9

    ...

    7075

    T62F, T651E

    6.30

    12.50

    540

    ...

    460

    ...

     9

    ...

    7075

    T62F, T651E

    12.50

    25.00

    540

    ...

    470

    ...

    ...

     6

    7075

    T62F, T651E

    25.00

    50.00

    530

    ...

    460

    ...

    ...

     5

    7075

    T62F, T651E

    50.00

    60.00

    525

    ...

    440

    ...

    ...

     4

    7075

    T62F, T651E

    60.00

    80.00

    495

    ...

    420

    ...

    ...

     4

    7075

    T62F, T651E

    80.00

    90.00

    490

    ...

    400

    ...

    ...

     4

    7075

    T62F, T651E

    90.00

    100.00

    460

    ...

    370

    ...

    ...

     2

    7075

    T73 sheet

    1.00

    6.30

    460

    ...

    385

    ...

     8

    ...

    7075

    T7351E plate

    6.30

    12.50

    475

    ...

    390

    ...

     7

    ...

    7075

    T7351E plate

    12.50

    25.00

    475

    ...

    390

    ...

    ...

     6

    7075

    T7351E plate

    25.00

    50.00

    475

    ...

    390

    ...

    ...

     5

    7075

    T7351E plate

    50.00

    60.00

    455

    ...

    360

    ...

    ...

     5

    7075

    T7351E plate

    60.00

    80.00

    440

    ...

    340

    ...

    ...

     5

    7075

    T7351E plate

    80.00

    90.00

    435

    ...

    340

    ...

    ...

    5

    7075

    T7351E plate

    90.00

    100.00

    420

    ...

    330

    ...

    ...

    5

    7075

    T76 sheet

    1.60

    6.30

    505

    ...

    425

    ...

     8

    ...

    7075

    T7651E plate

    6.30

    12.50

    495

    ...

    420

    ...

     8

    ...

    7075

    T7651E plate

    12.50

    25.00

    490

    ...

    415

    ...

    ...

     5

    7075

    FG

    6.30

    100.00

    ...

    ...

    ...

    ...

    ...

    ...

    Alclad 7075

    O

    0.19

    0.40

    ...

    250

    ...

    140

     9

    ...

    Alclad 7075

    O

    0.40

    1.60

    ...

    250

    ...

    140

    10

    ...

    Alclad 7075

    O

    1.60

    4.00

    ...

    260

    ...

    140

    10

    ...

    Alclad 7075

    O

    4.00

    12.50

    ...

    270

    ...

    145

    10

    ...

    Alclad 7075

    O

    12.50

    25.00

    ...

     275H

    ...

    ...

    ...

     9

    Alclad 7075

    T6, T62F

    0.19

    0.32

    470

    ...

    400

    ...

     5

    ...

    Alclad 7075

    T6, T62F

    0.32

    1.00

    490

    ...

    420

    ...

     8

    ...

    Alclad 7075

    T6, T62F

    1.00

    1.60

    495

    ...

    425

    ...

     9

    ...

    Alclad 7075

    T6, T62F

    1.60

    3.20

    510

    ...

    440

    ...

     9

    ...

    Alclad 7075

    T6, T62F

    3.20

    4.70

    510

    ...

    440

    ...

     9

    ...

    Alclad 7075

    T6, T62F

    4.70

    6.30

    525

    ...

    450

    ...

     9

    ...

    Alclad 7075

    T62F, T651E

    6.30

    12.50

    515

    ...

     445H

    ...

     9

    ...

    Alclad 7075

    T62F, T651E

    12.50

    25.00

     540H

    ...

     470H

    ...

    ...

     6

    Alclad 7075

    T62F, T651E

    25.00

    50.00

     530H

    ...

     460H

    ...

    ...

     5

    Alclad 7075

    T62F, T651E

    50.00

    60.00

     525H

    ...

     440H

    ...

    ...

     4

    Alclad 7075

    T62F, T651E

    60.00

    80.00

     495H

    ...

     420H

    ...

    ...

     4

    Alclad 7075

    T62F, T651E

    80.00

    90.00

     490H

    ...

     400H

    ...

    ...

     4

    Alclad 7075

    T62F, T651E

    90.00

    100.00

     460H

    ...

     370H

    ...

    ...

     2

    Alclad 7075

    T76 sheet

    1.00

    1.60

    460

    ...

    385

    ...

     8

    ...

    Alclad 7075

    T76 sheet

    1.60

    4.70

    470

    ...

    395

    ...

     8

    ...

    Alclad 7075

    T76 sheet

    4.70

    6.30

    485

    ...

    405

    ...

    8

    ...

    Alclad 7075

    T7651E plate

    6.30

    12.50

    475

    ...

    400

    ...

     8

    ...

    Alclad 7075

    T7651E plate

    12.50

    25.00

     490H

    ...

     415H

    ...

    ...

     5

    Alclad 7075

    FG

    6.30

    100.00

    ...

    ...

    ...

    ...

    ...

    ...

    Alclad 1-Side 7075

    O

    0.39

    1.60

    ...

    260

    ...

    145

    10

    ...

    Alclad 1-Side 7075

    O

    1.60

    4.00

    ...

    270

    ...

    145

    10

    ...

    Alclad 1-Side 7075

    O

    4.00

    12.50

    ...

    270

    ...

    145

    10

    ...

    Alclad 1-Side 7075

    O

    12.50

    25.00

    ...

     275H

    ...

    ...

    ...

     9

    Alclad 1-Side 7075

    T6, T62F

    0.19

    0.32

    490

    ...

    415

    ...

    5

    ...

    Alclad 1-Side 7075

    T6, T62F

    0.32

    1.00

    510

    ...

    440

    ...

    8

    ...

    Alclad 1-Side 7075

    T6, T62F

    1.00

    1.60

    515

    ...

    450

    ...

     9

    ...

    Alclad 1-Side 7075

    T6, T62F

    1.60

    3.20

    525

    ...

    455

    ...

     9

    ...

    Alclad 1-Side 7075

    T6, T62F

    3.20

    4.70

    530

    ...

    460

    ...

     9

    ...

    Alclad 1-Side 7075

    T6, T62F

    4.70

    6.30

    540

    ...

    460

    ...

     9

    ...

    Alclad 1-Side 7075

    T62F, T651E

    6.30

    12.50

    525

    ....

    455

    ...

     9

    ...

    Alclad 1-Side 7075

    T62F, T651E

    12.50

    25.00

     540H

    ...

     470H

    ...

    ...

     6

    Alclad 1-Side 7075

    T62F, T651E

    25.00

    50.00

     530H

    ...

     460H

    ...

    ...

     5

    Alclad 1-Side 7075

    FG

    6.30

    50.00

    ...

    ...

    ...

    ...

    ...

    ...

    (A)To determine conformance to this specification, each value for tensile strength shall be rounded to the nearest 1 MPa and each value for elongation to the nearest 0.5 %, both in accordance with the Rounding Method of Practice E29.
    (B)The basis for establishment of mechanical property limits is shown in Annex AI.
    (C)Elongations in 50 mm apply for thicknesses up through 12.50 mm and in 5× diameter for thicknesses over 12.50 mm.
    (D)Coiled sheet.
    (E)For stress-relieved tempers (T351, T451, T651, T7351, T7651, and T851), characteristics and properties other than those specified may differ somewhat from the corresponding characteristics and properties of material in the basic temper.
    (F)Material in the T42, T62, and T72 tempers is not available from the material producer.
    (G)Test for tensile properties in the F temper are not required.
    (H)The tension test specimen from plate over 12.50 mm in thickness is machined from the core and does not include the cladding.
    (I)The T72 temper is applicable only to Alloys 2024 and Alclad 2024 sheet solution heat treated and artificially overaged by the user to develop increased resistance to stress-corrosion cracking.
    (J)Short transverse tensile properties are not applicable to material less than 40 mm in thickness.
    (K)Use of Alloys 2219 and Alclad 2219 in the T31, T351, and T37 tempers for finished products is not recommended.
    (L)The properties for this thickness apply only to the T651 temper.

    1.1.1Plate in all alloys and sheet in heat-treatable alloys: mill finish.

    1.1.2Sheet in nonheat-treatable alloys: mill finish, one-side bright mill finish, standard one-side bright finish, and standard two-sides bright finish.

    1.2Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M). The equivalent Unified Numbering System (UNS) alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.

    Note 1:Throughout this specification, use of the term alloy in the general sense includes aluminum as well as aluminum alloy.

    Note 2:See Specification B632/B632M for Tread Plate.

    Note 3:See Specification B928/B928M for 5xxx-H116 and 5xxx-H321 aluminum alloys containing 3 % or more nominal magnesium and intended for marine service and similar environments. Other alloy-temper products listed in Specification B209, which do not require the additional corrosion testing/capability called out in Specification B928/B928M, may be suitable for marine and similar environment applications.

    1.3For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

    1.4This specification is the SI companion to Specification B209.

    1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee B 07
    Development Note Supersedes MIL A 52174. (05/2004) Supersedes SAE AMS QQ A 250/19 and SAE AMS QQ A 250/20. (09/2006)
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM B 947 : 2014 : REDLINE Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
    ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
    ASTM F 1099M : 1998 : R2005 Standard Specification for Rat Guards, Ship's (Metric)
    ASTM F 1099M : 1998 : R2011 Standard Specification for Rat Guards, Ship's (Metric)
    ASTM D 2510 : 1994 : R2012 Standard Test Method for Adhesion of Solid Film Lubricants
    DOD-S-70339 Base Document:1988 SEAL RING, METAL AND NON-METAL, FLAT, METRIC GENERAL SPECIFICATION FOR
    DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
    AASHTO M 197 : 2006 SPECIFICATION FOR ALUMINUM ALLOY SHEET FOR CORRUGATED ALUMINUM PIPE
    MIL-DTL-15024 Revision F:1997 Plates and Tags for Identification of Equipment, General Specification for
    ASTM D 2510 : 1994 : R1998 Standard Test Method for Adhesion of Solid Film Lubricants
    ASTM F 683 : 2014 : REDLINE Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
    B620-14 (R2019) Highway tanks and TC portable tanks for the transportation of dangerous goods
    AASHTO M 268 : 2015 SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR FLAT AND VERTICAL TRAFFIC CONTROL APPLICATIONS
    MIL C 24712 : A COATINGS, POWDER (METRIC)
    DOD-S-70340 Base Document:1988 SEAL RING, METAL, ASBESTOS FILLER, METRIC
    ASTM B 744/B744M : 2015 : REDLINE Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
    MIL-DTL-55074 Revision G:2013 Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for
    ASTM D 4956 : 2017 : REDLINE SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL
    MIL-DTL-28840-1 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, STRAIGHT, OPEN, FOR ELECTRICAL CONNECTORS
    S157-17/S157.1-17 Strength design in aluminum / Commentary on CSA S157-17, Strength design in aluminum
    AASHTO M 219 : 1992 SPECIFICATION FOR CORRUGATED ALUMINUM ALLOY STRUCTURAL PLATE FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES
    ASTM F 1099M:1998 Standard Specification for Rat Guards, Ship's (Metric)
    AWWA C513 : 2005 OPEN-CHANNEL, FABRICATED-METAL SLIDE GATES AND OPEN-CHANNEL, FABRICATED-METAL WEIR GATES
    ASTM B 881 : 2017 : REDLINE Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
    ASTM B 253 : 2011 : R2017 Standard Guide for Preparation of Aluminum Alloys for Electroplating
    DOD-S-70338 Base Document:1988 SEAL RING, METAL, METRIC GENERAL SPECIFICATION FOR
    ASTM B 253 : 2011 Standard Guide for Preparation of Aluminum Alloys for Electroplating
    ASTM D 2510 : 1994 : R2006 Standard Test Method for Adhesion of Solid Film Lubricants
    ASTM D 2510 : 1994 : R2017 Standard Test Method for Adhesion of Solid Film Lubricants
    ASTM B 745/B745M : 2015 : REDLINE Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
    ASTM B 746/B746M : 2016 : REDLINE Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
    ASME B31.5 : 2016 REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS
    ASME B18.29.2M:2005 HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)
    ASME B18.29.2M : 2005 : R2017 HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 209-1:1989 Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition
    ANSI H35.1/H35.1M : 2017 ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM
    ASTM B 918 : 2001 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
    ASTM E 607 : 2002 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
    ASTM B 666/B666M : 2015 : REDLINE Standard Practice for Identification Marking of Aluminum and Magnesium Products
    EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
    SAE AMS 2772 : 2016 HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS
    ASTM E 716 : 2016 : REDLINE Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
    ASTM E 527 : 2016 : REDLINE Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
    ISO 6361-2:2014 Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties
    ASTM B 947 : 2014 : REDLINE Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
    ASTM B 557M : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
    ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    ASTM E 290 : 2014 : REDLINE Standard Test Methods for Bend Testing of Material for Ductility
    ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
    ISO 2107:2007 Aluminium and aluminium alloys — Wrought products — Temper designations
    ASTM E 1004 : 2017 : REDLINE Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
    ASTM B 660 : 2015 : REDLINE Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
    ANSI H35.2M : 2013 DIMENSIONAL TOLERANCES FOR ALUMINUM MILL PRODUCTS (METRIC)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective