ASTM B 258 : 2018
Current
The latest, up-to-date edition.
Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
Hardcopy , PDF
English
01-10-2018
This specification prescribes standard nominal diameters and cross-sectional areas of American Wire Gage (AWG) sizes of solid round wires, used as electrical conductors, and gives equations and rules for the calculation of standard nominal mass and lengths, resistances, and breaking strengths of such wires (Explanatory Note 1).
Committee |
B 01
|
DocumentType |
Standard
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification prescribes standard nominal diameters and cross-sectional areas of American Wire Gage (AWG) sizes of solid round wires, used as electrical conductors, and gives equations and rules for the calculation of standard nominal mass and lengths, resistances, and breaking strengths of such wires (Explanatory Note 1).
1.2The values stated in inch-pound or SI units are to be regarded separately as standard. Each system shall be used independently of the other. Combining values of the two systems may result in nonconformance with the specification. For conductor sizes designated by AWG or kcmil sizes, the requirements in SI units have been numerically converted from the corresponding values stated or derived, in inch-pound units. For conductor sizes designated by SI units only, the requirements are stated or derived in SI units.
1.2.1For density, resistivity and temperature, the values stated in SI units are to be regarded as standard.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B 800 : 2005 : R2021 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers |
ASTM B 415 : 2016 | Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
ASTM B 47 : 1995 : REV A | Standard Specification for Copper Trolley Wire |
ASTM B 415 : 1998 | Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM B 609/B609M : 2012 : R2016 | Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
ASTM F 205 : 1994 : R2020 | Standard Test Method for Measuring Diameter of Fine Wire by Weighing (Withdrawn 2023) |
ASTM B 800 : 2005 : R2015 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers |
ASTM B 3 : 2013 : R2024 | Standard Specification for Soft or Annealed Copper Wire |
ASTM B 1 : 1995 | Standard Specification for Hard-Drawn Copper Wire |
ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM B 47 : 1995 : REV A : R2024 | Standard Specification for Copper Trolley Wire |
ASTM B 189 : 2005 : R2021 | Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
ASTM B 3 : 1995 | Standard Specification for Soft or Annealed Copper Wire |
ASTM B 9 : 1976 : R2017 : EDT 1 | Standard Specification for Bronze Trolley Wire |
ASTM B 415 : 2016 : R2021 | Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
ASTM B 606 : 1998 | Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
ASTM B 498/B498M : 2019 | Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
ASTM B 498/B498M : 2022 | Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
ASTM B 189 : 2005 : R2015 | Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
ASTM B 230/B230M : 2007 : R2016 | Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
ASTM B 398/B398M : 2015 | Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes |
ASTM B 47 : 1995 : REV A : R2017 | Standard Specification for Copper Trolley Wire |
ASTM A 326 : 1967 : R1985 : EDT 1 | Specification for Zinc-Coated (Galvanized) High Tensile Steel Telephone and Telegraph Line Wire |
ASTM B 502 : 1998 | Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced |
ASTM B 230/B230M : 2007 : R2021 | Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
ASTM B 3 : 2013 : R2018 | Standard Specification for Soft or Annealed Copper Wire |
ASTM B 398/B398M : 2022 | Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes |
ASTM B 9 : 1976 : R2024 | Standard Specification for Bronze Trolley Wire |
ASTM B 609/B609M : 2012 : R2021 | Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
ASTM B 230/B230M : 2022 | Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
ASTM B 398/B398M : 2015 : R2021 | Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes |
ASTM B 314 : 1990 | Specification for Aluminum 1350 Wire for Communication Cable (Withdrawn 1994) |
ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.