ASTM B 283/B283M : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Hardcopy , PDF
13-11-2019
English
01-04-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing method.
| Committee |
B 05
|
| DocumentType |
Standard
|
| Pages |
16
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 7602
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing method. The following copper and copper alloys are included:
| Copper or Copper Alloy UNS No. | Name |
| C11000 | copper |
| C14500 | copper-tellurium |
| C14700 | copper-sulfur |
| C27450 | plumbing brass |
| C27451 | plumbing brass |
| C27453 | copper zinc alloy |
| C28500 | copper-zinc brass |
| C35330 | leaded brass |
| C36500 | leaded Muntz metal |
| C37000 | free-cutting Muntz metal |
| C37700 | forging brass |
| C46400 | naval brass |
| C46500 | naval brass, arsenical |
| C46750 | tin brass |
| C48200 | medium leaded naval brass |
| C48500 | leaded naval brass |
| C48600 | naval brass |
| C48640 | DZR brass |
| C49250 | copper-zinc-bismuth alloy |
| C49255 | copper-zinc-bismuth-nickel alloy |
| C49260 | copper-zinc-bismuth alloy |
| C49265 | copper-zinc-tin-bismuth, low leaded |
| C49300 | copper-zinc-tin-bismuth alloy |
| C49340 | copper-zinc-tin-bismuth alloy |
| C49345 | copper-zinc-tin-bismuth, low leaded |
| C49350 | copper-zinc-tin-bismuth alloy |
| C49355 | bismuth brass |
| C61900 | aluminum bronze |
| C62300 | aluminum bronze, 9 % |
| C63000 | aluminum-nickel bronze |
| C63200 | aluminum-nickel bronze |
| C64200 | aluminum-silicon bronze |
| C64210 | aluminum-silicon bronze, 6.7 % |
| C65500 | high-silicon bronze (A) |
| C65680 | high-silicon bronze |
| C67500 | manganese bronze (A) |
| C67600 | . . . |
| C69300 | copper-zinc-silicon |
| C69410 | copper-zinc-silicon |
| C69850 | copper-zinc-silicon |
| C70620 | copper-nickel 90-10 |
| Copper or Copper Alloy UNS No. | Name |
| C71520 | copper-nickel 70-30 |
| C77400 | nickel silver, 45-10 |
| C87700 | silicon bronze |
| C87710 | silicon bronze |
1.2Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Note 1:Nominal composition and relative forgeability ratings are given in Appendix X1. Copper-nickel alloys C70620 and C71520 are intended for welded applications with seawater exposure.
Note 2:Guidelines for design and development of forgings are included in Appendix X2.
Note 3:Wrought product intended for hot forging is described in Specification B124/B124M.
1.3The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.