ASTM B 283/B283M : 2022
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Hardcopy , PDF
31-07-2024
English
01-10-2022
Committee |
B 05
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing method. The following copper and copper alloys are included:
Copper or Copper Alloy UNS No. | Name |
C11000 | copper |
C14500 | copper-tellurium |
C14700 | copper-sulfur |
C27450 | plumbing brass |
C27451 | plumbing brass |
C27453 | copper zinc alloy |
C28500 | copper-zinc brass |
C35330 | leaded brass |
C36300 | copper-zinc-lead |
C36500 | leaded Muntz metal |
C37000 | free-cutting Muntz metal |
C37700 | forging brass |
C46400 | naval brass |
C46500 | naval brass, arsenical |
C46750 | tin brass |
C48200 | medium leaded naval brass |
C48500 | leaded naval brass |
C48600 | naval brass |
C48640 | DZR brass |
C48645 | DZR tin brass |
C49250 | copper-zinc-bismuth alloy |
C49255 | copper-zinc-bismuth-nickel alloy |
C49260 | copper-zinc-bismuth alloy |
C49265 | copper-zinc-tin-bismuth, low leaded |
C49300 | copper-zinc-tin-bismuth alloy |
C49340 | copper-zinc-tin-bismuth alloy |
C49345 | copper-zinc-tin-bismuth, low leaded |
C49350 | copper-zinc-tin-bismuth alloy |
C49355 | bismuth brass |
C61900 | aluminum bronze |
C62300 | aluminum bronze, 9 % |
C63000 | aluminum-nickel bronze |
C63200 | aluminum-nickel bronze |
C64200 | aluminum-silicon bronze |
C64210 | aluminum-silicon bronze, 6.7 % |
C65500 | high-silicon bronze (A) |
C65680 | high-silicon bronze |
C67500 | manganese bronze (A) |
C67600 | . . . |
C69300 | copper-zinc-silicon |
C69410 | copper-zinc-silicon |
Copper or Copper Alloy UNS No. | Name |
C69850 | copper-zinc-silicon |
C70620 | copper-nickel 90-10 |
C71520 | copper-nickel 70-30 |
C77400 | nickel silver, 45-10 |
C87700 | silicon bronze |
C87710 | silicon bronze |
Copper Alloy EN 1412 Nos. | Name |
CW612N | forging brass |
CW617N | forging brass |
1.2Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other and values from the two systems shall not be combined.
Note 1:Nominal composition and relative forgeability ratings are given in Appendix X1. Copper-nickel alloys C70620 and C71520 are intended for welded applications with seawater exposure.
Note 2:Guidelines for design and development of forgings are included in Appendix X2.
Note 3:Wrought product intended for hot forging is described in Specification B124/B124M.
1.3The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B 124/B124M : 2020 | Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes |
ASTM F 1974 : 2009 : R2020 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
ASTM F 2854 : 2021 | Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
ASTM F 1960 : 2021 | Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
ASTM F 3347 : 2022 | Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing |
ASTM B 249/B249M : 2022 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings |
ASTM F 3347 : 2023 | Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing |
ASTM F 2080 : 2023 | Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe |
ASTM F 1960 : 2023 : REV B | Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
ASTM F 1807 : 2023 | Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing |
ASTM F 1974 : 2023 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
ANSI/AWWA C509:2023 | Resilient-Seated Gate Valves for Water Supply Service |
ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM B 249/B249M : 2023 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.