ASTM B 30 : 2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Copper Alloys in Ingot and Other Remelt Forms
Hardcopy , PDF
12-05-2023
English
10-06-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
B 05
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification establishes the requirements for copper alloys in ingot and other forms including granules, nuggets, pellets, or shot for remelting for the manufacturing of castings having the Copper Alloy UNS No. designation, commercial designations and nominal composition shown in Table 1 and Table 2. Product delivered in forms other than ingot shall be upon agreement between the supplier and purchaser.
1.2A cross reference of Copper Alloy UNS Nos. and copper alloy casting specifications is given in Table 3.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 784 : 1989 : R2022 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM B 66 : 2015 | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| ASTM E 581 : 2017 : REV A | Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys |
| ASTM B 770 : 2015 | Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications |
| ASTM B 584 : 2014 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM B 208 : 2014 | Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM B 806 : 2014 | Standard Specification for Copper Alloy Permanent Mold Castings for General Applications |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 581 : 2017 : REV A : R2022 : EDT 1 | Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM B 61 : 1993 | Standard Specification for Steam or Valve Bronze Castings (Withdrawn 2002) |
| ASTM B 806 : 1993 | Standard Specification for Copper Alloy Permanent Mold Castings for General Applications |
| ASTM B 67 : 2014 : R2022 | Standard Specification for Car and Tender Journal Bearings, Lined |
| ASTM B 770 : 2021 | Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications |
| ASTM E 255 : 1991 : R1997 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
| ASTM B 427 : 2021 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM B 194 : 2022 | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 427 : 2009 : R2015 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM B 62 : 1993 | Standard Specification for Composition Bronze or Ounce Metal Castings (Withdrawn 2002) |
| ASTM B 66 : 2015 : R2021 | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| ASTM B 584 : 2014 : R2022 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM B 67 : 1993 | Standard Specification for Car and Tender Journal Bearings, Lined |
| ASTM E 478 : 2008 : R2017 | Standard Test Methods for Chemical Analysis of Copper Alloys |
| ASTM B 505/B505M : 2005 | Standard Specification for Copper-Base Alloy Continuous Castings |
| ASTM B 763/B763M : 2015 | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASTM B 763/B763M : 2015 : R2022 | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASTM B 806 : 2014 : R2022 | Standard Specification for Copper Alloy Permanent Mold Castings for General Applications |
| ASTM B 67 : 2014 | Standard Specification for Car and Tender Journal Bearings, Lined |
| ASTM B 61 : 2015 : R2021 | Standard Specification for Steam or Valve Bronze Castings |
| ASTM B 427 : 1993 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM B 61 : 2015 | Standard Specification for Steam or Valve Bronze Castings |
| ASTM B 208 : 2014 : R2021 | Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings |
| ASTM B 194 : 2015 | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.