• Shopping Cart
    There are no items in your cart

ASTM B 366/B366M : 2023

Current

Current

The latest, up-to-date edition.

Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

12-04-2023

€56.53
Excluding VAT

Committee
B 02
DocumentType
Standard
Pages
9
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers wrought welding fittings for pressure piping, factory-made from nickel and nickel alloys. Threaded fittings as covered in ASME B16.11 are also covered by this specification. The term welding applies to butt-welding or socket-welding parts such as 45° and 90° elbows, 180° bends, caps, tees, reducers, lap-joint stub ends, and other types, as covered by ASME B16.9, ASME B16.11, MSS SP-43, MSS SP-95, and MSS SP-97.

1.1.1Several grades of nickel and nickel alloys are included in this specification. Grades are designated with a prefix, WP or CR, based on the applicable ASME or MSS dimensional and rating standards.

1.1.2Class WP fittings are those manufactured to the requirements of ASME B16.9, B16.11.

1.1.3For each of the WP nickel and nickel alloy grades, several classes of fittings are covered to indicate whether seamless or welded construction was utilized. Class designations are also utilized to indicate the nondestructive test method and extent of nondestructive examination (NDE). Table 1 is general summary of the fitting classes applicable to all WP grades of nickel and nickel alloys covered by this specification. There are no classes for the CR grades. Specific requirements are covered elsewhere.

1.2This specification does not apply to cast welding fittings.

1.3Optional supplementary requirements are provided for fittings where a greater degree of examination is desired. These supplementary requirements call for additional tests. When desired, one or more of these may be specified in the order.

1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASME B16.9:2024 Factory-Made Wrought Buttwelding Fittings

ASTM B 676 : 2019 Standard Specification for UNS N08367 Welded Tube
ASTM B 704 : 2023 Standard Specification for Welded Nickel Alloy Tubes
ASTM B 575 : 2017 : R2023 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip
ASTM B 572 : 2024 Standard Specification for Heat and Corrosion Resistant High Temperature Alloy Bar or Rod
ASTM B 619/B619M : 2017 : REV A Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B 691 : 2018 : R2024 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire
ASTM B 622 : 2023 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ASTM B 710 : 2020 : REV A : EDT 1 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
ASTM B 880 : 2014 : R2019 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
ASTM B 619/B619M : 2017 : REV B Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B 573 : 2006 : R2016 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod
ASTM B 704 : 2019 Standard Specification for Welded Nickel Alloy Tubes
ASTM B 619/B619M : 2015 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B 619/B619M : 2019 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B 619/B619M : 2017 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B 574 : 2023 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
ASTM B 677 : 2021 Standard Specification for Nickel-Iron-Chromium-Molybdenum and Iron-Nickel-Chromium-Molybdenum-Copper Seamless Pipe and Tube
ASTM B 581 : 2017 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
ASTM B 444 : 2018 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys<brk/> (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
ASTM B 676 : 2019 : R2024 Standard Specification for UNS N08367 Welded Tube
ASTM E 1916 : 2011 : R2019 Standard Guide for Identification of Mixed Lots of Metals
ASTM B 880 : 2024 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
ASTM B 167 : 2018 Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube
ASTM B 574 : 2018 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM B 446 : 2023 Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
ASTM B 516 : 2018 Standard Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
ASTM B 516 : 2024 Standard Specification for Welded Nickel-Chromium-Aluminum Alloy and Nickel-Chromium-Iron Alloy Tubes
ASTM E 1916 : 2024 Standard Guide for Identification of Mixed Lots of Metals
ASTM B 472 : 2018 Standard Specification for Nickel Alloy Billets and Bars for Reforging
ASTM B 160 : 2024 Standard Specification for Nickel Rod and Bar
ASTM B 581 : 2017 : R2023 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
ASTM B 444 : 2023 Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloys<brk/> and Nickel-Chromium-Molybdenum-Silicon Alloy Pipe and Tube
ASTM B 573 : 2024 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys Bar or Rod
ASTM B 619/B619M : 2019 : R2023 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B 705 : 2024 Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Iron-Chromium-Molybdenum-Copper Alloy Welded Pipe
ASTM B 446 : 2019 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
ASTM B 473 : 2024 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy Bar and Wire
ASTM B 705 : 2017 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
ASTM B 473 : 2007 : R2018 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
ASTM B 677 : 2023 Standard Specification for Nickel-Iron-Chromium-Molybdenum, Iron-Nickel-Chromium-Molybdenum-Copper, and Nickel-Iron-Chromium-Molybdenum-Nitrogen Seamless Pipe and Tube
ASTM B 166 : 2019 Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
ASTM B 710 : 2020 : REV A Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
ASTM B 572 : 2006 : R2016 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
ASTM B 446 : 2024 Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
ASTM B 472 : 2023 Standard Specification for Nickel Alloy Billets and Bars for Reforging
ASTM B 622 : 2017 : REV B Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ASTM B 166 : 2024 Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
ASTM B 160 : 2005 : R2019 Standard Specification for Nickel Rod and Bar
ASTM B 575 : 2017 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip
ASTM B 167 : 2023 Standard Specification for Nickel-Chromium-Aluminum Alloys, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Seamless Pipe and Tube
ASTM B 691 : 2018 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.