ASTM B 473 : 2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
Hardcopy , PDF
11-11-2014
English
01-05-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 02.04, 2015 Covers UNS N08020, UNS N08026, and UNS N08024 bar and wire other than required for reforging.
| Committee |
B 02
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers UNS N08020, UNS N08026, and UNS N08024 bar and wire other than required for reforging.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
| API 594 REDLINE : 2010 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
| ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
| ASTM B 475 : 2007 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MIL-DTL-32408 Base Document:2012 | INTEGRAL MOTOR PUMP (IMP) |
| API 594 RUSSIAN : 2004 | CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| MSS SP 118 : 2007 | COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| 10/30214867 DC : 0 | BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| 02/705659 DC : DRAFT APR 2002 | ISO/DIS 21049 - PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| API 594 CHINESE : 2004 | CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING |
| ASTM B 475 : 2007 : R2018 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire |
| I.S. EN ISO 4126-2:2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
| EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
| API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| API 682 CHINESE : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| UNI EN ISO 4126-2 : 2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES |
| ASTM B 475 : 2007 : R2013 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire |
| ISO 21049:2004 | Pumps — Shaft sealing systems for centrifugal and rotary pumps |
| BS EN ISO 21049:2004 | Pumps. Shaft sealing systems for centrifugal and rotary pumps |
| ASME B73.2 : 2016 | Specification for Vertical In-Line Centrifugal Pumps for Chemical Process |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM E 1473 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.