ASTM B 507 : 2014 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Practice for Design of Articles to Be Electroplated on Racks
Available format(s)
PDF
Language(s)
English
Published date
01-05-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 02.05, 2017 Specifies design information for parts to be electroplated on racks.
| Committee |
B 08
|
| DocumentType |
Redline
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This practice covers design information for parts to be electroplated on racks. The recommendations contained herein are not mandatory, but are intended to give guidance toward good practice.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM B 200 : 1985 : R2009 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 177/B177M : 2011 : R2017 | Standard Guide for Engineering Chromium Electroplating |
| ASTM B 679 : 1998 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM B 867 : 1995 : R2013 | Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use |
| ASTM B 689 : 1997 : R2003 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 689 : 1997 : R2013 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 679 : 1998 : R2004 : EDT 1 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM B 841 : 1999 : R2010 | Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 999 : 2015 | Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate |
| ASTM B 605 : 1995 : REV A : R2004 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 867 : 1995 | Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| ASTM B 734 : 1997 | Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM B 700 : 2008 : R2014 | Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
| ASTM B 650 : 1995 : R2002 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM B 766 : 1986 : R1998 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 734 : 1997 : R2013 | Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM B 840 : 2015 : REDLINE | Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits |
| ASTM B 177 : 2001 : R2006 : EDT 1 | Standard Guide for Engineering Chromium Electroplating |
| ASTM B 650 : 1995 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| SAE J1837_201712 | Electroplate Requirements for Decorative Chromium Deposits on Zinc Base Materials Used for Exterior Ornamentation |
| ASTM B 200 : 1985 : R2004 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 177/B177M : 2011 | Standard Guide for Engineering Chromium Electroplating |
| ASTM B 650 : 1995 : R2013 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM B 766 : 1986 : R2003 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 841 :1999 | Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 700 : 2008 | Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
| ASTM B 867 : 1995 : R2003 | Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use |
| ASTM B 766 : 1986 : R2015 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 984 : 2012 | Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use |
| ASTM B 734 : 1997 : R2008 | Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM B 177 : 2001 | Standard Guide for Engineering Chromium Electroplating |
| ASTM B 867 : 1995 : R2008 | Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use |
| ASTM B 650 : 1995 : R2008 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM B 689 : 1997 : R2008 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 200 : 1985 : R2015 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 605 : 1995 : REV A : R1999 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 200 : 1985 : R1999 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 841 : 1999 : R2004 | Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 766 : 1986 : R2008 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 689 : 1997 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 679 : 1998 : R2009 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM B 605 : 1995 : REV A : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 679 : 1998 : R2015 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM B 734 : 1997 : R2003 : EDT 1 | Standard Specification for Electrodeposited Copper for Engineering Uses |
| ASTM B 605 : 1995 : REV A : R2009 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.