ASTM B 650 : 1995 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
Hardcopy , PDF
21-12-2023
English
18-06-2018
Committee |
B 08
|
DocumentType |
Standard
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers the requirements for electrodeposited chromium coatings applied to ferrous alloys for engineering applications.
1.2Electrodeposited engineering chromium, which is sometimes called “functional” or “hard” chromium, is usually applied directly to the basis metal and is much thicker than decorative chromium. Engineering chromium is used for the following:
1.2.1To increase wear and abrasion resistance,
1.2.2To increase fretting resistance,
1.2.3To reduce static and kinetic friction,
1.2.4To reduce galling or seizing, or both, for various metal combinations,
1.2.5To increase corrosion resistance, and
1.2.6To build up undersize or worn parts.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 1007 : 2018 : R2022 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
ASTM B 177/B177M : 2011 : R2021 | Standard Guide for Engineering Chromium Electroplating |
ASTM B 765 : 2003 : R2018 | Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings |
ASTM B 851 : 2004 : R2020 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
ASTM B 568 : 1998 : R2014 | Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
ASTM F 1459 : 2006 : R2017 | Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE) |
ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
ASTM B 568 : 1998 : R2021 | Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
ASTM B 499 : 2009 : R2021 : EDT 1 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
ASTM B 762 : 1990 : R2016 | Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings |
ASTM B 697 : 1988 : R2021 | Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings |
ASTM B 697 : 1988 : R2016 | Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings |
ASTM B 183 : 2018 : R2022 | Standard Practice for Preparation of Low-Carbon Steel for Electroplating |
ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
ASTM B 850 : 1998 : R2022 | Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement |
ASTM B 507 : 2014 | Standard Practice for Design of Articles to Be Electroplated on Racks |
ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
ASTM B 499 : 2009 : R2014 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
ASTM B 762 : 2021 | Standard Guide of Variables Sampling of Metallic and Inorganic Coatings |
ASTM B 850 : 1998 : R2015 | Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement |
ASTM B 602 : 1988 : R2016 | Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings |
ASTM B 374 : 2006 : R2019 | Standard Terminology Relating to Electroplating |
ASTM B 602 : 2021 | Standard Guide for Attribute Sampling of Metallic and Inorganic Coatings |
ASTM B 374 : 2021 | Standard Terminology Relating to Electroplating |
ASTM B 507 : 2014 : R2021 | Standard Practice for Design of Articles to Be Electroplated on Racks |
ASTM F 1459 : 1993 : R1998 : EDT 1 | Standard Test Method for Determination of the Susceptibility of Metallic Materials to Gaseous Hydrogen Embrittlement |
ASTM B 183 : 2018 | Standard Practice for Preparation of Low-Carbon Steel for Electroplating |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.