ASTM B 660 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
Available format(s)
Hardcopy , PDF
Superseded date
21-12-2023
Superseded by
Language(s)
English
Published date
10-06-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
B 07
|
| DocumentType |
Standard Practice
|
| Pages |
25
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These practices describe methods of packaging/packing aluminum and magnesium products, in preparation for storage or shipment, both foreign and domestic. Assuming proper and normal handling in transit, these practices are designed to deliver the products to their destination in good condition. For DoD redistribution, see Supplementary Requirements.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3Aluminum and magnesium products must be preserved and packed so as to be adequately protected from possible damage during shipment and storage. Major damage types are:
1.3.1Mechanical, including bending, crushing, denting, scratching, or gouging during handling and storage; and abrasions resulting from vibration during transport of the material.
1.3.2Corrosion, or water stain, resulting from exposure of packed material to water, either externally applied, or as condensate caused by temperature variations in a humid atmosphere.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM B 234M : 2017 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| ASTM B 247M : 2020 | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| ASTM B 429/B429M : 2020 | Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube |
| ASTM B 317/B317M : 2007 : R2015 : EDT 1 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 210/B210M : 2019 : REV A | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes |
| ASTM B 491/B491M : 2015 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| ASTM B 361 : 2016 | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
| ASTM B 108/B108M : 2019 | Standard Specification for Aluminum-Alloy Permanent Mold Castings |
| ASTM B 928/B928M : 2015 | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| ASTM B 483/B483M : 2020 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications |
| ASTM B 90/B90M : 2021 | Standard Specification for Magnesium-Alloy Sheet and Plate |
| ASTM B 91 : 2017 | Standard Specification for Magnesium-Alloy Forgings |
| ASTM B 93/B93M : 2021 | Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings |
| ASTM B 955/B955M : 2018 | Standard Specification for Aluminum-Alloy Centrifugal Castings |
| ASTM B 618/B618M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Investment Castings |
| ASTM B 107/B107M : 2013 | Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire |
| ASTM B 686/B686M : 2018 | Standard Specification for Aluminum Alloy Castings, High-Strength |
| ASTM B 234 : 2017 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| ASTM B 881 : 2017 | Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products |
| ASTM B 236M : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024) |
| ASTM B 403 : 2020 | Standard Specification for Magnesium-Alloy Investment Castings |
| ASTM B 211/B211M : 2019 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| ASTM B 37 : 2018 | Standard Specification for Aluminum for Use in Iron and Steel Manufacture |
| ASTM B 199 : 2017 | Standard Specification for Magnesium-Alloy Permanent Mold Castings |
| ASTM B 236 : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| ASTM B 247 : 2020 | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B 209/B209M : 2021 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM B 26/B26M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Sand Castings |
| ASTM B 94 : 2018 | Standard Specification for Magnesium-Alloy Die Castings |
| ASTM B 316/B316M : 2020 | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| ASTM B 241/B241M : 2016 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM B 221 : 2020 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B 80 : 2015 | Standard Specification for Magnesium-Alloy Sand Castings |
| ASTM B 969/B969M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes |
| ASTM B 308/B308M : 2020 | Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles |
| ASTM B 221M : 2013 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric) |
| ASTM D 3953 : 2006 | Standard Specification for Strapping, Flat Steel and Seal |
| ASTM D 3950 : 2010 : REV B | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 5168 : 2012 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
| ASTM D 1732 : 1967 : R1998 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| ASTM F 1667 : 2005 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3953 : 2007 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3950 : 2001 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3950 : 2010 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM D 3953 : 1991 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM F 1667 : 2018 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3950 : 2016 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3950 : 2007 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 3953 : 2012 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3953 : 2015 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM F 1667 : 2013 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM F 1667 : 2011 : REV A | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM F 1667 : 2011 : REV A : EDT 1 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3950 : 2004 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3950 : 2009 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM F 1667 : 2015 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 5168 : 2003 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM F 1667 : 2021 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3950 : 2005 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM F 1667 : 2010 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM F 1667 : 2018 : REV A | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3953 : 2005 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM D 1732 : 2003 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| ASTM D 3950 : 2009 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3950 : 2011 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 1732 : 2003 : R2018 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| ASTM F 1667 : 2000 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM F 1667 : 2003 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3953 : 2007 : REV A | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM F 1667 : 2020 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM F 1667 : 2001 : REV A | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3950 : 2006 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM F 1667 : 2011 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3950 : 2017 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM F 1667 : 2002 : REV A | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM F 1667 : 2017 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 3950 : 2012 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3950 : 2010 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3953 : 2002 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3950 : 2000 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 779 : 1994 : R1998 | Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method |
| ASTM D 1732 : 2003 : R2013 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| ASTM D 3953 : 2013 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 1732 : 2003 : R2008 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| ASTM F 1667 : 2002 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM D 5168 : 1998 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 5168 : 2009 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 3953 : 1997 | Standard Specification for Strapping, Flat Steel and Seals |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.