ASTM B 689 : 1997 : R2018 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Electroplated Engineering Nickel Coatings
Hardcopy , PDF
09-06-2023
English
13-08-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
B 08
|
| DocumentType |
Standard
|
| Pages |
7
|
| ProductNote |
ε1NOTE—Reference links in subsection 6.5 updated editorially in August 2018.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the requirements for electroplated nickel coatings applied to metal products for engineering applications, for example, for use as a buildup for mismachined or worn parts, for electronic applications, including as underplates in contacts or interconnections, and in certain joining applications.
1.2Electroplating of nickel for engineering applications (Note 1) requires technical considerations significantly different from decorative applications because the following functional properties are important:
1.2.1Hardness, strength, and ductility,
1.2.2Wear resistance,
1.2.3Load bearing characteristics,
1.2.4Corrosion resistance,
1.2.5Heat scaling resistance,
1.2.6Fretting resistance, and
1.2.7Fatigue resistance.
Note 1:Functional electroplated nickel coatings usually contain about 99 % nickel, and are most frequently electrodeposited from a Watts nickel bath or a nickel sulfamate bath. Typical mechanical properties of nickel electroplated from these baths, and the combined effect of bath operation and solution composition variables on the mechanical properties of the electrodeposit are given in Guide B832. When electroplated nickel is required to have higher hardnesses, greater wear resistance, certain residual stress values and certain leveling characteristics, sulfur and other substances are incorporated in the nickel deposit through the use of certain addition agents in the electroplating solution. For the effect of such additives, see Section 4 and Annex A3. Cobalt salts are sometimes added to the plating solution to produce harder nickel alloy deposits.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 1370 : 1992 : R2019 : EDT 1 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| ASTM B 984 : 2012 : R2020 : EDT 1 | Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use |
| ASTM B 765 : 2003 : R2018 | Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings |
| ASTM B 679 : 1998 : R2021 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM F 2080 : 2023 | Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe |
| ASTM B 877 : 1996 : R2018 | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method |
| ASTM B 851 : 2004 : R2020 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| ASTM B 866 : 1995 : R2018 | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| ASTM B 568 : 1998 : R2014 | Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
| ASTM D 762 : 1949 | Method of Test for Hot Extraction of Asphaltic Materials and Recovery of Bitumen by the Modified Abson Procedure |
| ASTM B 851 : 1994 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish (Withdrawn 2004) |
| ASTM B 253 : 2011 : R2022 | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM B 568 : 1998 : R2021 | Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
| ASTM B 499 : 2009 : R2021 : EDT 1 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
| ASTM B 480 : 1988 : R2017 | Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating |
| ASTM B 697 : 1988 : R2021 | Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings |
| ASTM B 697 : 1988 : R2016 | Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings |
| ASTM B 183 : 2018 : R2022 | Standard Practice for Preparation of Low-Carbon Steel for Electroplating |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM B 850 : 1998 : R2022 | Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement |
| ASTM B 507 : 2014 | Standard Practice for Design of Articles to Be Electroplated on Racks |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM B 480 : 1988 : R2022 | Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating |
| ASTM D 762 | Method of Test for Hot Extraction of Asphaltic Materials and Recovery of Bitumen by the Modified Abson Procedure (Withdrawn 1964) |
| ASTM B 499 : 2009 : R2014 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
| ASTM B 850 : 1998 : R2015 | Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement |
| ASTM B 602 : 1988 : R2016 | Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings |
| ASTM B 374 : 2006 : R2019 | Standard Terminology Relating to Electroplating |
| ASTM B 602 : 2021 | Standard Guide for Attribute Sampling of Metallic and Inorganic Coatings |
| ASTM B 530 : 2009 : R2021 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates |
| ASTM B 374 : 2021 | Standard Terminology Relating to Electroplating |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM B 507 : 2014 : R2021 | Standard Practice for Design of Articles to Be Electroplated on Racks |
| ASTM B 253 : 2011 : R2017 | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| ASTM B 183 : 2018 | Standard Practice for Preparation of Low-Carbon Steel for Electroplating |
| ASTM B 530 : 2009 : R2014 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.